Send Message

Please enter name, subject and message below. Include an e-mail address if you wish to get a response. Otherwise that field can be left blank.

Name:

E-mail:

Subject:

Message (use shift+enter for newline):

Send Cancel
Message Sent

The message have now been sent. Thank you for the response.

Close
Failed Sending Message

The system was for some reason not able to sent the message. Please try again later.

Close

LEGO Star Wars Part Inventory

Bars, Ladders and Fences:294
Bionicle, Hero Factory and Constraction:105
Bricks
⋅ Standard:870
⋅ Curved:659
⋅ Round and Cones:355
⋅ Sloped:1174
⋅ Special:473
⋅ Wedged:99
Containers:16
Flags, Signs, Plastics and Cloth:21
Hinges, Arms and Turntables:342
Magnets and Holders:4
Minifig Accessories:256
Minifigs:256
Panels:121
Plants and Animals:14
Plates
⋅ Standard:3814
⋅ Angled:774
⋅ Round and Dishes:956
⋅ Special:1669
Power Functions, Mindstorms and Electric:16
Stickers:13
String, Bands and Reels:21
Supports, Girders and Cranes:9
Total number of parts:23681
Technic
⋅ Axles:651
⋅ Beams:1953
⋅ ⋅ Special:112
⋅ Bricks:710
⋅ Bushes:271
⋅ Connectors:1258
⋅ Gears:189
⋅ Panels:439
⋅ Pins:3197
⋅ Special:117
⋅ Steering, Suspension and Engine:223
Tiles
⋅ Standard:1249
⋅ Printed:42
⋅ Special:606
Tools:10
Transportation - Land:36
Transportation - Sea and Air:33
Tubes and Hoses:60
Wheels and Tyres:180
Windscreens and Fuselage:14

Bars, Ladders and Fences - Show owned parts

1

Antenna 1 x 4 with Rounded Top

3

Antenna Whip 8H

2

Bar 1 x 3 [Clip / Anti-Stud]

2

Bar 7 x 3 with Double Clips (Ladder)

5

Bar 3L

2

Bar 4L (Lightsaber Blade / Wand)

26

Bar 6L with Stop Ring

4

Lever Small Base with Black Lever

6

Antenna 1 x 4 with Rounded Top

3

Bar 4L (Lightsaber Blade / Wand)

14

Spring Shooter Ammuniton 8L

4

Bar 4L (Lightsaber Blade / Wand)

24

Spring Shooter Ammuniton 8L

13

Bar 4L (Lightsaber Blade / Wand)

1

Bar 4L (Lightsaber Blade / Wand)

*4

Antenna 1 x 4 with Flat Top

2

Antenna 1 x 4 with Rounded Top

4

Bar 1 x 6 [Closed Studs]

2

Bar 1 x 8 with Brick 1 x 2 Curved Top End (Axle Holder Inside Small End)

2

Bar 1 x 12 with 1 x 2 Plate End and 1 x 1 Round Plate End

2

Bar 1 x 12 with 1 x 2 Plate End with Hollow Studs and 1 x 1 Round Plate End

6

Bar 1L with Clip [Cut Edges and One Side Hole]

4

Bar 1L with Top Stud and Two Side Studs

3

Bar 3L

27

Bar 4L (Lightsaber Blade / Wand)

8

Bar 5L with Handle (Friction Ram)

13

Bar 6L with Stop Ring

2

Bar 8L - Two Stop Rings / One Pin, Figure Ski Pole [Rounded End]

*4

Bar 8L - Two Stop Rings / One Pin, Figure Ski Pole [Flat End]

18

Lever Small Base with Black Lever

39

Pin 1/2 with 2L Bar Extension

6

Bar 1 x 3 (Radio Handle, Phone Handset)

6

Bar 1 x 8 with Brick 1 x 2 Curved Top End (Axle Holder Inside Small End)

2

Bar 1L with Clip

8

Bar 1L with Clip [Cut Edges and One Side Hole]

6

Bar 6L with Stop Ring

16

Bar Holder with Clip

Bionicle, Hero Factory and Constraction - Show owned parts

14

Tooth 1 x 3 with Axle Hole

8

Tooth 1 x 3 with Axle Hole

6

Tooth 1 x 3 with Axle Hole

4

Bionicle Rahkshi Chest Section

4

Bionicle Wing Small

6

Tooth 1 x 3 with Axle Hole

2

Bionicle Shoulder Armour

10

Tooth 1 x 3 with Axle Hole

4

Light Cover with Internal Bar / Bionicle Barraki Eye

6

Tooth 1 x 3 with Axle Hole

5

Hero Factory Weapon Barrel with 2 Pin Holes and 3 Axle Holes

2

Light Cover with Internal Bar / Bionicle Barraki Eye

1

Bionicle Visorak Torso - Beam 8 x 3 x 2

2

Hero Factory Weapon Barrel with 2 Pin Holes and 3 Axle Holes

1

Bionicle Rahkshi Torso Lower Section

20

Tooth 1 x 3 with Axle Hole

44140/1486

Bionicle Rahkshi Back Cover with Groove

2

Light Cover with Internal Bar / Bionicle Barraki Eye

2

Light Cover with Internal Bar / Bionicle Barraki Eye

Bricks - Show owned parts

2

Brick 1 x 2 x 2 with Inside Stud Holder

4

Brick 1 x 1

1

Brick 1 x 16

20

Brick 1 x 2

5

Brick 1 x 4

2

Brick 2 x 3

8

Brick 2 x 4

2

Brick 1 x 8

2

Brick 2 x 6

1

Brick 1 x 2

2

Brick 1 x 3

2

Brick 1 x 4

2

Brick 2 x 4

2

Brick 1 x 2 x 2 with Inside Stud Holder

53

Brick 1 x 2 x 5 with Blocked Open Studs and Bottom Stud Holder with Asymmetric Ridges

2

Brick 1 x 1

8

Brick 1 x 10

14

Brick 1 x 12

53

Brick 1 x 2

58

Brick 1 x 3

34

Brick 1 x 4

30

Brick 1 x 6

16

Brick 1 x 8

8

Brick 2 x 2 Corner

11

Brick 2 x 4

1

Brick 1 x 10

1

Brick 1 x 4

4

Brick 2 x 2 Corner

1

Brick 2 x 10

4

Brick 2 x 2

13

Brick 2 x 4

5

Brick 2 x 6

1

Brick 2 x 3

16

Brick 1 x 4

2

Brick 2 x 2

2

Brick 2 x 4

1

Brick 1 x 2 without Bottom Tube

2

Brick 1 x 1

2

Brick 1 x 2 without Bottom Tube

3

Brick 1 x 2 x 2 with Inside Axle Holder

7

Brick 1 x 2 x 2 with Inside Stud Holder

15

Brick 1 x 1

2

Brick 1 x 10

6

Brick 1 x 12

46

Brick 1 x 2

32

Brick 1 x 3

42

Brick 1 x 4

103

Brick 1 x 6

2

Brick 1 x 8

2

Brick 2 x 2 Corner

1

Brick 2 x 10

17

Brick 2 x 3

25

Brick 2 x 4

46

Brick 2 x 6

3

Brick 2 x 8

*2

Brick 1 x 1 x 5 with Blocked Open Stud

4

Brick 1 x 1 x 5 with Solid Stud

1

Brick 1 x 2 x 2 with Inside Axle Holder

9

Brick 1 x 1

18

Brick 1 x 2

8

Brick 1 x 3

7

Brick 1 x 4

1

Brick 1 x 6

2

Brick 1 x 8

6

Brick 2 x 2

11

Brick 2 x 3

12

Brick 2 x 4

1

Brick 2 x 2

4

Brick 1 x 2

25

Brick 1 x 2

6

Brick 2 x 2 Corner

4

Brick 2 x 2

Bricks Curved - Show owned parts

4

Brick Arch 1 x 3

5

Brick Arch 1 x 6

12

Brick Curved 1 x 2 x 1 1/3 with Curved Top

2

Brick Curved 2 x 2 with Two Top Studs

6

Slope Curved 2 x 1 No Studs [1/2 Bow]

9

Slope Curved 2 x 2 x 2/3

14

Slope Curved 3 x 1 No Studs

2

Slope Curved 4 x 1 Inverted

4

Slope Curved 4 x 2 No Studs

2

Slope Curved 10 x 1 [Symmetric Inside Ridges]

2

Brick Curved 2 x 2 x 2/3 Two Studs, Curved Slope End

2

Slope Curved 2 x 4 x 2/3 No Studs [Bottom Tubes]

12

Slope Curved 3 x 1 No Studs

10

Slope Curved 4 x 1 No Studs [Stud Holder with Symmetric Ridges]

8

Slope Curved 3 x 1 No Studs

30

Brick Arch 1 x 6 x 2 Curved Top

12

Brick Curved 1 x 2 x 1 1/3 with Curved Top

4

Brick Curved 2 x 3 with Curved Top

21

Brick Curved 2 x 4 x 1 1/3 with Curved Top

8

Brick Modified 1 x 3 x 2 with Curved Top

2

Slope Curved 2 x 1 No Studs [1/2 Bow]

6

Slope Curved 2 x 2 x 2/3

11

Slope Curved 4 x 1 Double No Studs

4

Slope Curved 4 x 1 No Studs [Stud Holder with Symmetric Ridges]

2

Wedge 3 x 4 x 2/3 Triple Curved Smooth

8

Brick Arch 1 x 8 x 2 Raised

2

Brick Curved 1 x 2 x 1 1/3 with Curved Top

12

Slope Curved 2 x 2 x 2/3

4

Slope Curved 4 x 1 Double No Studs

2

Brick Curved 1 x 2 x 1 1/3 with Curved Top

8

Slope Curved 2 x 1 No Studs [1/2 Bow]

2

Slope Curved 2 x 2 Lip, No Studs

2

Slope Curved 2 x 1 No Studs [1/2 Bow]

8

Brick Arch 1 x 3 x 2 Curved Top

2

Brick Arch 1 x 6 Raised Arch

2

Brick Arch 1 x 6 x 2 - Very Thin Top without Reinforced Underside

4

Brick Arch 1 x 6 x 2 Curved Top

4

Brick Arch 1 x 8 x 2

31

Brick Curved 1 x 2 x 1 1/3 with Curved Top

4

Brick Curved 1 x 4 x 1 1/3 No Studs, Curved Top

22

Brick Curved 2 x 2 x 2/3 Two Studs, Curved Slope End

7

Brick Curved 2 x 4 x 1 1/3 with Curved Top

6

Slope Curved 2 x 1 Inverted

51

Slope Curved 2 x 1 No Studs [1/2 Bow]

4

Slope Curved 2 x 2 Lip, No Studs

10

Slope Curved 2 x 2 x 2/3

26

Slope Curved 2 x 4 x 2/3 No Studs [Bottom Tubes]

4

Slope Curved 2 x 8 x 2 Double

62

Slope Curved 3 x 1 No Studs

5

Slope Curved 4 x 1 Double No Studs

8

Slope Curved 4 x 1 No Studs [Stud Holder with Symmetric Ridges]

2

Slope Curved 4 x 2 No Studs

1

Slope Curved 5 x 8 x 2/3

2

Slope Curved 10 x 1 [Symmetric Inside Ridges]

4

Brick Arch 1 x 3 x 2 Curved Top

4

Brick Curved 1 x 2 x 1 1/3 with Curved Top

2

Brick Curved 2 x 2 x 2/3 Two Studs, Curved Slope End

14

Slope Curved 2 x 1 No Studs [1/2 Bow]

5

Slope Curved 2 x 2 x 2/3

2

Slope Curved 3 x 1 No Studs

6

Slope Curved 4 x 1 Double No Studs

2

Slope Curved 4 x 1 No Studs [Stud Holder with Symmetric Ridges]

2

Slope Curved 4 x 2 No Studs

6

Slope Curved 6 x 1 Inverted

4

Slope Curved 10 x 1 [Symmetric Inside Ridges]

4

Brick Arch 1 x 3 x 2 Curved Top

5

Slope Curved 2 x 1 No Studs [1/2 Bow]

2

Slope Curved 2 x 2 x 2/3

6

Slope Curved 2 x 4 x 2/3 No Studs [Bottom Tubes]

20

Slope Curved 3 x 1 No Studs

4

Brick Arch 1 x 3 x 2 Curved Top

22

Brick Curved 1 x 2 x 1 1/3 with Curved Top

1

Brick Curved 1 x 4 x 1 1/3 No Studs, Curved Top

4

Brick Curved 1 x 4 x 1 1/3 No Studs, Curved Top, with Raised Inside Support

3

Brick Curved 2 x 4 x 1 1/3 with Curved Top

6

Slope Curved 3 x 1 No Studs

2

Slope Curved 4 x 1 Double No Studs

4

Slope Curved 4 x 1 No Studs [Stud Holder with Symmetric Ridges]

2

Slope Curved 8 x 6 x 2 Inverted Double

2

Slope Curved 10 x 1 [Symmetric Inside Ridges]

2

Wedge 4 x 4 x 2/3 Triple Curved

4

Slope Curved 2 x 1 No Studs [1/2 Bow]

15

Slope Curved 2 x 2 x 2/3

1

Wedge 3 x 4 x 2/3 Triple Curved Smooth

Bricks Round and Cones - Show owned parts

1

Brick Round 1 x 1 Open Stud

*1

Brick Round 2 x 2 Dome Top - Blocked Open Stud with Bottom Axle Holder x Shape + Orientation

2

Brick Round 2 x 2 Dome Top - Hollow Stud with Bottom Axle Holder x Shape + Orientation

2

Brick Round 2 x 2 Truncated Cone

2

Brick Round 2 x 2 with Axle Hole

5

Brick Round 4 x 4 [Centre Hole]

3

Brick, Round 2 x 2 x 2 Robot Body - with Bottom Axle Holder x Shape x Orientation

1

Brick, Round 2 x 2 [Grill]

2

Cone 1 x 1 [No Top Groove]

8

Cone 1 x 1 [Top Groove]

4

Brick Round 1 x 1 diameter Tube with 90 Degree Elbow(2 x 2 x 1) and Axle Holes(Crossholes) at each end

1

Brick Round 1 x 1 Open Stud

3

Brick Round 2 x 2 Dome Top - Hollow Stud with Bottom Axle Holder x Shape + Orientation

15

Brick Round 2 x 2 with Axle Hole

2

Brick Round 2 x 2 x 1 2/3 Dome Top [Blocked Open Stud]

4

Brick Round 2 x 2 x 2 Robot Body - with Bottom Axle Holder x Shape + Orientation

4

Cone 1 x 1 [No Top Groove]

7

Cone 1 x 1 [Top Groove]

5

Brick Round 1 x 1 Open Stud

3

Brick Round 2 x 2 Sphere with Stud / Robot Body with BB-8 Droid Print

4

Brick Round 2 x 2 with Axle Hole

2

Brick Round 2 x 2 x 2 Robot Body with Gray and Dark Blue R2-D2 Print

4

Cylinder 3 x 6 x 2 2/3 Horizontal Open Studs

3

MINI HAT NO. 8 DECO NO.1

1

ROUND BRICK 2X2X2 NO. 1008

13

Brick Round 1 x 1 Open Stud

1

Cone 1 x 1 [Top Groove]

2

Brick Round 1 x 1 Open Stud

1

Minifig Head with Gold Death Star Print [Blocked Open Stud]

9

Brick Round 2 x 2 with Axle Hole

4

Cone 1 x 1 [Top Groove]

3

Cone Half 8 x 4 x 6 with Millennium Falcon Cockpit Print [Version 2]

4

Brick, Round 2 x 2 [Grill]

14

Brick Round 1 x 1 Open Stud

*1

Brick Round 2 x 2 Dome Top - Blocked Open Stud with Bottom Axle Holder x Shape + Orientation

1

Brick Round 2 x 2 Dome Top - Hollow Stud with Bottom Axle Holder x Shape + Orientation

11

Brick Round 2 x 2 Truncated Cone

29

Brick Round 2 x 2 with Axle Hole

6

Brick Round 4 x 4 with 4 Side Pin Holes and Center Axle Hole

8

Brick Round Corner 4 x 4 Macaroni Wide with 3 Studs

3

Brick, Round 2 x 2 [Grill]

18

Brick, Round Corner 2 x 2 Macaroni with Stud Notch and Reinforced Underside [New Style]

8

Cone 1 x 1 [No Top Groove]

22

Cone 1 x 1 [Top Groove]

2

Cone 3 x 3 x 2

3

Cone Half 8 x 4 x 6

22

Brick Round 1 x 1 Open Stud

8

Brick Round 4 x 4 with 4 Side Pin Holes and Center Axle Hole

1

Brick Round 4 x 4 [Centre Hole]

2

Brick Round Corner 3 x 3 x 2 Dome Top

9

Cone 1 x 1 [Top Groove]

2

Cone 4 x 4 x 2 [Axle Hole]

2

Cylinder Half 2 x 4 x 4

2

Cone 1 x 1 [Top Groove]

2

Brick Round 2 x 2 Dome Top with Dark Blue Print (R2-D2)

8

Cone 1 x 1 [Top Groove]

15

Brick Round 1 x 1 Open Stud

5

Cone 1 x 1 [Top Groove]

4

Brick Round Corner 6 x 6 with 33 EdgeSlope and Facet Cutout

4

Brick Round Corner 6 x 6 x 2

2

Brick Round 1 x 1 Open Stud

6

Brick Round Corner 6 x 6 with 33 EdgeSlope and Facet Cutout

2

Brick Round Corner 6 x 6 x 2

2

Brick, Round Corner 10 x 10 with Slope 33 Edge, Axle Hole, Facet Cutout

1

FINAL BRICK 2X2, NO. 1008

4

Brick Round 1 x 1 Open Stud

Bricks Sloped - Show owned parts

14

Slope 18 2 x 1 x 2/3 with 4 Slots

2

Slope 18 4 x 2

21

Slope 30 1 x 1 x 2/3 (Cheese Slope)

6

Slope 30 1 x 2 x 2/3

1

Slope 33 3 x 2

2

Slope 45 2 x 1 with 2/3 Cutout [Original Version]

3

Slope 45 2 x 2 Double

3

Slope 45 2 x 2 with Complex Control Panel with Red and Green Lamps Print

4

Slope 45 2 x 2 with Radar and Disk Slot Gray Print [Black]

15

Slope 45 2 x 2

2

Slope 65 2 x 1 x 2

2

Slope 75 2 x 1 x 3 with Hollow Stud

2

Slope Inverted 45 2 x 1

1

Slope Inverted 45 4 x 4 Double

2

Slope Inverted 75 2 x 1 x 3

*1

Slope Inverted 33 3 x 2 [Connections between Studs]

13

Slope 30 1 x 1 x 2/3 (Cheese Slope)

*2

Slope 45 2 x 2 Double Concave

*4

Slope 75 2 x 1 x 3 with Open Stud

10

Slope 30 1 x 1 x 2/3 (Cheese Slope)

2

Slope 18 2 x 1 x 2/3 with 4 Slots

4

Slope 18 4 x 1

42

Slope 30 1 x 1 x 2/3 (Cheese Slope)

19

Slope 30 1 x 2 x 2/3

4

Slope 33 3 x 1

6

Slope 33 3 x 2

1

Slope 33 3 x 3

2

Slope 45 2 x 2 Double Concave

2

Slope 45 2 x 2

8

Slope 55 6 x 1 x 5

1

Slope 65 2 x 1 x 2

48

Slope 75 2 x 1 x 3 with Hollow Stud

1

Slope 75 2 x 2 x 3 - Solid Studs

8

Slope 75 2 x 2 x 3 Double Convex

25

Slope 75 2 x 2 x 3 [Hollow Studs]

4

Slope Inverted 33 3 x 1 (34)

12

Slope Inverted 45 2 x 1

12

Slope Inverted 75 2 x 1 x 3

10

Slope 30 1 x 2 x 2/3

5

Slope 45 2 x 1 with Bottom Pin

12

Slope Inverted 33 3 x 2 [No Connections between Studs]

3

Slope 30 1 x 1 x 2/3 (Cheese Slope)

2

Slope 30 1 x 1 x 2/3 (Cheese Slope)

1

Slope 45 2 x 1 with Bottom Pin

8

Slope 65 2 x 2 x 2 with Bottom Tube

10

Slope 30 1 x 1 x 2/3 (Cheese Slope)

23

Slope 30 1 x 1 x 2/3 (Cheese Slope)

20

Slope 30 1 x 1 x 2/3 (Cheese Slope)

26

Slope 30 1 x 1 x 2/3 (Cheese Slope)

3

Slope 18 2 x 1 x 2/3 with 4 Slots

3

Slope 18 4 x 1

39

Slope 30 1 x 1 x 2/3 (Cheese Slope)

46

Slope 30 1 x 2 x 2/3

16

Slope 33 3 x 1

1

Slope 33 3 x 2

2

Slope 33 3 x 4

2

Slope 45 2 x 1 with 2/3 Cutout [New Version]

37

Slope 45 2 x 1 with Bottom Pin

9

Slope 45 2 x 2

6

Slope 45 2 x 8

12

Slope 65 2 x 1 x 2

42

Slope 65 2 x 2 x 2 with Bottom Tube

18

Slope 75 2 x 1 x 3 with Hollow Stud

1

Slope 75 2 x 2 x 3 - Solid Studs

4

Slope 75 2 x 2 x 3 Double Convex

22

Slope Inverted 33 3 x 1 (34)

*12

Slope Inverted 33 3 x 2 [Connections between Studs]

4

Slope Inverted 33 3 x 2 [No Connections between Studs]

32

Slope Inverted 45 2 x 2 [Ovoid Bottom Pin, Bar-sized Stud Holes]

82

Slope Inverted 45 2 x 1

2

Slope Inverted 45 3 x 1 Double with 2 Blocked Open Studs

4

Slope Inverted 45 4 x 2 Double

3

Slope Inverted 45 6 x 4 Double with 4 x 4 Cutout and 3 Holes

4

Slope Inverted 75 2 x 1 x 3

18

Slope 18 2 x 1 x 2/3 with 4 Slots

17

Slope 18 4 x 1

6

Slope 18 4 x 2

29

Slope 30 1 x 1 x 2/3 (Cheese Slope)

37

Slope 30 1 x 2 x 2/3

9

Slope 33 3 x 2

4

Slope 33 3 x 4

4

Slope 45 2 x 1 with 2/3 Cutout [Original Version]

16

Slope 45 2 x 1 with Bottom Pin

2

Slope 45 2 x 2 Double Concave

3

Slope 45 2 x 4

19

Slope 65 2 x 2 x 2 with Bottom Tube

14

Slope Inverted 33 3 x 1 (34)

*10

Slope Inverted 33 3 x 2 [Connections between Studs]

8

Slope Inverted 45 2 x 2 Double Convex

18

Slope Inverted 45 2 x 2 [Ovoid Bottom Pin, Bar-sized Stud Holes]

2

Slope Inverted 45 3 x 1 Double with 2 Blocked Open Studs

2

Slope Inverted 45 4 x 2 Double

1

Slope Inverted 45 6 x 4 Double with 4 x 4 Cutout and 3 Holes

9

Slope 30 1 x 1 x 2/3 (Cheese Slope)

8

Slope 45 2 x 1 with Bottom Pin

2

Slope Inverted 33 3 x 1 (34)

22

Slope 18 4 x 1

2

Slope 18 4 x 2

23

Slope 30 1 x 1 x 2/3 (Cheese Slope)

4

Slope 30 1 x 2 x 2/3

4

Slope 33 3 x 1

4

Slope 33 3 x 3

17

Slope 45 2 x 1 with Bottom Pin

7

Slope 45 2 x 2

6

Slope 65 2 x 1 x 2

2

Slope Inverted 45 6 x 1 Double with 1 x 4 Cutout

2

Slope 30 1 x 1 x 2/3 (Cheese Slope)

2

Slope 33 3 x 1

4

Slope 45 2 x 1 with 2/3 Cutout [New Version]

Bricks Special - Show owned parts

9

Brick Special 1 x 1 with Headlight and No Slot

14

Brick Special 1 x 1 with Stud on 1 Side

1

Brick Special 1 x 1 with Studs on 2 Sides

36

Brick Special 1 x 2 with Studs on 2 Sides

1

Brick Special 1 x 2 x 2/3 with Studs on Sides

12

Brick Special 1 x 4 with 4 Studs on One Side

4

Brick Special 1 x 4 with Groove

2

Brick Special 2 x 4 x 2 with Studs on Sides

2

Brick Special 1 x 1 with Stud on 1 Side

4

Brick Special 1 x 4 with 4 Studs on One Side

2

Brick Special 1 x 2 with Studs on 1 Side

2

Brick Special 1 x 1 with Studs on 2 Sides

2

Brick Special 1 x 2 with Pin

7

Brick Special 1 x 2 with Studs on 1 Side

5

Brick Special 1 x 2 with Studs on 2 Sides

3

Brick Special 1 x 2 with Studs on 2 Sides

1

Brick Special 1 x 1 Studs on 4 Sides

2

Brick Special 1 x 1 with Headlight and No Slot

4

Brick Special 1 x 1 with Stud on 1 Side

12

Brick Special 1 x 2 with Grill

4

Brick Special 1 x 2 with Studs on 1 Side

17

Brick Special 1 x 4 with 4 Studs on One Side

12

Brick Special 1 x 2 Palisade [aka Log]

2

Brick Special 1 x 2 with Studs on 1 Side

1

Brick Special 1 x 4 with 4 Studs on One Side

7

Brick Special 2 x 2 with Pin and Axle Hole

2

Brick Special 1 x 2 with Vertical Clip [Open O Clip]

1

Brick Special 1 x 1 Studs on 4 Sides

5

Brick Special 1 x 1 with Clip Vertical [Open O Clip, Hollow Stud]

2

Brick Special 1 x 1 with Handle

18

Brick Special 1 x 1 with Headlight and No Slot

8

Brick Special 1 x 1 with Stud on 1 Side

18

Brick Special 1 x 2 with Grill

2

Brick Special 1 x 2 with Masonry Brick Profile

3

Brick Special 1 x 2 with Pin

12

Brick Special 1 x 2 with Studs on 1 Side

14

Brick Special 1 x 2 with Studs on 2 Sides

2

Brick Special 1 x 2 with Vertical Clip [Open O Clip]

12

Brick Special 1 x 2 x 1 2/3 with four studs on one side

12

Brick Special 1 x 4 with 4 Studs on One Side

12

Brick Special 1 x 4 with Groove

12

Brick Special 2 x 2 with 2 Pins and Axle Hole

2

Brick Special 2 x 2 with Pin and Axle Hole

24

Brick Special - Spring Shooter 1 x 4 with Light Bluish Gray Top

16

Brick Special 1 x 1 with Stud on 1 Side

12

Brick Special 1 x 1 with Studs on 2 Sides

27

Brick Special 1 x 2 with Grill

4

Brick Special 1 x 2 with Handle

6

Brick Special 1 x 2 with Pin

*2

Brick Special 1 x 2 with Vertical Clip [Thick U Clip]

21

Brick Special 1 x 4 with 4 Studs on One Side

10

Brick Special 2 x 2 with Grooves and Axle Hole

41

Brick Special 2 x 4 with Pins

1

Brick Special 2 x 4 x 1 1/3 with Holes and 2 x 2 Cutout

2

Brick Special 1 x 4 with 4 Studs on One Side

2

Brick Special 1 x 2 with Groove

Bricks Wedged - Show owned parts

4

Brick Wedged 1 x 2 x 2/3 No Studs, Wing End

24

Facet 2 x 2

2

Brick Wedged 2 x 3 x 2/3 Two Studs, Wing End

2

Wedge 4 x 3 [No Studs]

1

Wedge 4 x 4 Taper with Stud Notches

1

Wedge 4 x 4 Triple Inverted [4 Connections between Front Studs]

12

Facet 3 x 3

4

Wedge 3 x 4 x 2/3 Cutout

2

Wedge 3 x 4 [Stud Notches]

1

Wedge 6 x 2 Left

1

Wedge 6 x 2 Right

2

Wedge 6 x 4 Inverted Curved

3

Wedge 6 x 4 Triple Curved

4

Facet 2 x 2

16

Facet 3 x 3

3

Wedge 4 x 2 Left

3

Wedge 4 x 2 Right

2

Wedge 6 x 2 Left

2

Wedge 6 x 2 Right

2

Wedge 6 x 4 Inverted Curved

2

Wedge 4 x 4 (Slope 18 Corner)

1

Wedge 8 x 3 x 2 Open Left

1

Wedge 8 x 3 x 2 Open Right

2

Wedge 12 x 3 Left

2

Wedge 12 x 3 Right

Containers - Show owned parts

1

Container - Crate with Handholds

3

Box 2 x 2 x 2 Door with Slot

3

Box 2 x 2 x 2 [Hollow Studs]

2

Container Box 2 x 2 x 2 - Top Opening

7

Container Box 2 x 2 x 2 - Top Opening

Flags, Signs, Plastics and Cloth - Show owned parts

2

Minifig Cape - Cloth Standard - Traditional Starched Fabric

2

Flag 2 x 2 Square [Thick Clips]

2

Flag 2 x 2 Trapezoid

4

Minifig Armour Kama Cloth

1

Shoulder Cloth

1

Minifig Cape - Cloth Standard - Traditional Starched Fabric

3

Road Sign Clip-on 2 x 2 Square [Thick Open O Clip]

4

Flag 5 x 6 Hexagonal with U Clips

2

Minifig Pauldron Cloth, Small

Hinges, Arms and Turntables - Show owned parts

2

Hinge Brick 1 x 2 Base

2

Hinge Brick 1 x 2 Top Plate Thin

4

Hinge Brick 2 x 2 Top Plate Thin

7

Hinge Cylinder 1 x 2 Locking with 1 Finger and Axle Hole On Ends

5

Hinge Plate 1 x 2 Locking with 1 Finger On End, with Groove

3

Hinge Plate 1 x 2 Locking with 1 Finger on Side, with Groove

16

Hinge Plate 1 x 2 Locking with 2 Fingers On End, with Groove

5

Hinge Plate 1 x 2 Locking with 2 Fingers on Side

2

Hinge Plate 1 x 4 Swivel Top / Base [Complete Assembly]

4

Hinge Plate 2 x 2 Locking with 1 Finger on Top

4

Hinge Plate 2 x 4 with Pin Hole - Bottom

2

Hinge Tile 1 x 4 Locking Dual 1 Fingers on Top [8 Locking Ridges]

*2

Hinge Tile 1 x 4

1

Plate Special 6 x 8 Trap Door Frame Horizontal [Long Pin Holders]

31

Turntable 2 x 2 Plate, Base

6

Turntable 4 x 4 Square Base, Locking

2

Hinge Brick 2 x 2 Top Plate Thin

4

Hinge Plate 1 x 4 Swivel Top / Base [Complete Assembly]

1

Hinge Brick 1 x 2 Base

3

Hinge Brick 2 x 2 Top Plate Thin

10

Hinge Plate 1 x 2 Locking with 1 Finger On End, with Groove

*2

Hinge Tile 1 x 4

*2

Hinge Tile 1 x 4

4

Hinge Plate 1 x 2 Locking with 1 Finger on Side, with Groove

5

Hinge Brick 1 x 2 Base

2

Hinge Brick 1 x 2 Top Plate Thin

2

Hinge Plate 1 x 2 Locking with 1 Finger On Top

*2

Hinge Tile 1 x 4

3

Hinge Brick 1 x 2 Base

3

Hinge Brick 1 x 2 Top Plate Thin

1

Hinge Brick 2 x 2 Locking with 2 Fingers Vertical and Axle Hole

3

Hinge Brick 2 x 2 Top Plate Thin

3

Hinge Plate 1 x 2 Locking with 1 Finger on Side, with Groove

3

Hinge Plate 1 x 2 Locking with 2 Fingers On End, with Groove

6

Hinge Plate 1 x 2 Locking with 2 Fingers on Side

2

Hinge Plate 1 x 4 Locking Dual 1 Finger

6

Hinge Plate 1 x 4 Swivel Top / Base [Complete Assembly]

4

Hinge Plate 2 x 2 Locking with 1 Finger on Top

4

Hinge Plate 2 x 4 with Pin Hole - Bottom

25

Hinge Plate 2 x 4 with Pin Hole - Top

4

Hinge Plate 3 x 4 Locking Dual 2 Finger

31

Turntable 2 x 2 Plate - Top

1

Turntable 4 x 4 Square Base, Locking

3

Hinge Brick 1 x 2 Base

2

Hinge Cylinder 1 x 2 Locking with 2 Click Fingers and Axle Hole

2

Hinge Panel 6 x 3

4

Hinge Plate 1 x 2 Locking with 1 Finger On End, with Groove

7

Hinge Plate 1 x 2 Locking with 1 Finger on Side, with Groove

2

Hinge Plate 1 x 2 Locking with 1 Finger On Top

4

Hinge Plate 1 x 2 Locking with 2 Fingers On End, with Groove

31

Hinge Plate 1 x 4 Swivel Top / Base [Complete Assembly]

4

Hinge Plate 2 x 4 with Articulated Joint - Male

3

Hinge Plate 3 x 4 Locking Dual 2 Finger

1

Hinge Tile 1 x 3 Locking with 1 Finger on Top

44

Plate Special 4 x 6 with Trap Door Hinge [Long Pins]

1

Plate Special 6 x 8 Trap Door Frame Horizontal [Long Pin Holders]

Magnets and Holders - Show owned parts

2

Magnet Cylindrical

2

Magnet Holder 2 x 3

Minifig Accessories - Show owned parts

4

Ice Cream Cone

2

MINI SHOOTER CB W. 3.2 SHAFT

1

Minifig Blaster 1 x 2 x 2/3 with Studs on Sides and Handle

1

Minifig Gun, Blaster Mini

1

Minifig Helmet Sith Trooper with Red Stripe and Imperial Print

2

Minifig Helmet SW Darth Vader

1

Minifig Helmet SW Death Star Trooper

1

Minifig Helmet SW Stormtrooper Type 2, TIE Fighter Pilot Print (Rebels Cartoon Style)

2

Minifig Hose Nozzle with Side String Hole Simplified

11

Minifig Lightsaber Hilt with Bottom Ring

1

Minifig Loudhailer [aka SW Blaster / Space Gun]

3

Minifig Mallet / Large Hammer

2

Minifig Roller Skate

4

Minifig Spanner / Screwdriver

3

Minifig Star Wars Blaster Long

16

Minifig Star Wars Blaster Short

14

Minifig Star Wars Blaster Small

2

Minifig Swimming Cap

2

Minifig Two Barrel Pistol

1

Minifig Whip [aka Plant Vine]

2

SHIELD NO.7

11

Tap 1 x 1 without Hole in Spout

1

Minifig Cap SW Imperial Officer

2

Minifig Helmet SW Senate Commando with Black Markings Print

1

Minifig Cup

2

Tap 1 x 1 without Hole in Spout

1

MINI FIGURE HELMET NO. 76 DEC NO 1

1

MINI FIGURE HELMET NO. 84

1

Minifig Helmet Clone Trooper with Holes, Clone Pilot Print

1

Minifig Helmet Star Wars Rebel Pilot with Blue Rebel Symbol Print

1

Minifig Helmet SW Clone Trooper with Holes, Clone Gunner Print

1

Minifig Helmet SW Luminara Unduli

1

Minifig Helmet SW Rebel Pilot with Red Rebel Logo, Stripes and Side Print

4

Minifig Helmet SW Snowtrooper with Black Eyeholes Print

3

Minifig Helmet SW Stormtrooper, Dotted Mouth, Blue and Sand Blue Print

4

Tap 1 x 1 without Hole in Spout

1

CAMOUFLAGE PONCHO NO.1, NO.1

1

MINI HELMET NO. 84 DEC NO. 1

2

Minifig Headgear SW Resistance Trooper Helmet with Tan Rectangles and Black Circles and attached Trans-Yellow Visor [Dimples for Accessory]

2

Minifig Visor Chin Guard for SW Resistance Trooper Helmet

2

REBEL HELMET ENDOR NO.2

1

Minifig Statuette, Emperor Palpatine Hologram

2

Minifig Cup

2

Minifig Neck Bracket with 2 Back Studs

1

Minifig Backpack Non-Opening

1

Minifig Bag Messenger Pouch

2

Minifig Flintlock Pistol

3

Minifig Hood

2

Minifig Pirate Flintlock / Musket

2

Minifig Crystal Ball Globe 2 x 2 x 2

1

Minifig Helmet Star Wars Rebel Pilot

1

Minifig Helmet SW Stormtrooper Type 2, AT-AT Driver Dark Red Imperial Logo Print

22

Minifig Hose Nozzle with Side String Hole Simplified

13

Minifig Lightsaber Hilt with Bottom Ring

1

Minifig Space Gun / Torch [No Grooves]

4

Minifig Telescope

5

Neck Bracket [One Stud]

11

Tap 1 x 1 without Hole in Spout

2

Grappling Hook

1

Headgear Helmet SW Imperial Pilot with Black Goggles Pattern (AT-ST Driver)

1

Minifig Binoculars

2

Minifig Cap, SW Imperial Officer with Silver and Black Code Disc Print

1

Minifig Circular Saw

10

Minifig Gun Trigger

1

Minifig Hood

63586/724

Minifig Rangefinder for Helmet SW Clone Trooper with Holes

3

Minifig Shovel [Round Stem End]

2

Minifig Space Binoculars [aka Electrobinoculars]

1

Minifig Space Gun / Torch [No Grooves]

4

Minifig Visor SW Clone Trooper

13

Minifig Lightsaber Hilt with Bottom Ring

1

MINI HELMET NO. 107

2

Minifig Crossbow

2

Minifig Star Wars Blaster Short

2

Minifig Star Wars Blaster Small

3

Minifig Feather / Plume Triple Point

3

Wave / Flame Rounded with Base Rim

1

Minifig Crowbar

1

Minifig Hood

1

Minifig Helmet with Holes, SW Mandalorian with Dark Brown and Silver Print

1

Minifig Jet Pack with Nozzles

1

Minifig Helmet SW Imperial AT-ST Pilot

Minifigs - Show owned parts

2

Hair Male with Coiled Texture

1

Hair Swept Left Tousled

2

Leg Skeleton

1

Legs and Hips with Sith Trooper Armour and Silver and Dark Red Knee-Pads Print

1

Legs and Hips with SW Imperial Gunner Print

1

Legs and Hips with SW Sith Robe Print (Darth Vader)

4

Legs and Hips [Complete Assembly]

2

MINI LOWER PART NO. 960

2

MINI LOWER PART NO. 961

1

Minifig Hair Mid-Length Tousled with Center Part

2

Minifig Hair Pulled Back

2

Minifig Head Alien with SW Jawa, Yellow Eyes with Orange Rim Print [Hollow Stud]

1

Torso SW Armor Sith Trooper Print / Black Arms / Black Hands

1

Torso SW Darth Vader Death Star Print / Black Arms / Black Hands

1

Torso SW Darth Vader Imperial Star Destroyer Print / Black Arms / Black Hands

1

Torso SW Imperial Crew Uniform Print / Black Arms / Black Hands Hands

1

Torso SW TIE Pilot, Detailed with Back Printing Print (Rebels Cartoon Style) / Black Arms / Black Hands

1

Torso SW Vest and White Shirt with Flesh-Colored Skin Print (Han Solo) / Tan Arms / Light Flesh Hands

2

Legs and Black Hips

1

Legs and Hips [Complete Assembly]

2

Torso SW Armor Clone Trooper Print (Clone Wars) / Blue Arms / Black Hands

1

Torso SW Bespin Guard Print Dual Sided / Blue Arms / Light Flesh Hands

1

Legs and Hips [Complete Assembly]

1

Torso SW Chancellor Palpatine Print / Dark Red Arms / Light Flesh Hands

4

Arm Mechanical [Battle Droid]

6

Leg Mechanical - Droid with Pin

2

Legs and Black Hips

3

Legs and Black Hips with SW Stormtrooper Black and Gray Markings Print

1

Legs and Hips with SW Jedi Robe with Gold Markings Print

3

Legs and Hips [Complete Assembly]

2

Legs and Light Bluish Gray Hips

1

MINI LOWER PART NO. 955

1

MINI UPPER PART NO 3166

1

Minifig Hair Combed Front to Rear

1

Torso Clone Pilot Armour Flight Suit Print / White Arms / Black Hands

1

Torso SW Armor Clone Trooper Clone Gunner Print / Dark Bluish Gray Arms / Black Hands

1

Torso SW Armor Snowtrooper Commander Print / White Arms / White Hands

3

Torso SW Armor Stormtrooper, Detailed Armor Print without Shoulder Belts / White Arms / Black Hands

3

Torso SW Armour Snowtrooper with Printed Back Print / White Arms / Light Bluish Gray Hands

1

Torso SW Jedi Robe, Female with Gold Markings Print / White Arms / Light Bluish Gray Hands

1

Torso SW Loose Dress Lt Bluish Gray Folds Print (Leia) / White Arms / Light Flesh Hands

1

Torso SW Shirt Open Collar with Wrinkles Print / White Arms / Light Flesh Hands [Han Solo 9516]

1

Torso SW Wrap-Around Tunic and Utility Belt with Large Pouch Print / White Arms / Light Flesh Hands

1

Legs and Hips [Complete Assembly]

1

Legs and White Hips with White Leggings Print

1

Legs Short [without Hole]

1

Minifig Hair - Swept Back with Widow's Peak

1

Minifig Hair Tousled and Layered

1

Minifig Head with Orange Eyes, Wrinkles, Scar and Two Large Scars on Back Print (SW Darth Vader) [Hollow Stud]

1

Torso Layered Jedi Robe Upper, Reddish Brown Undershirt, Reddish Brown Belt Print / Tan Arms / Light Flesh Hands

1

Torso Old Obi-Wan Light Flesh Neck, Brown Belt Print / Tan Arms / Light Flesh Hands

1

Torso SW Layered Shirt Yoda, Olive Green Neck Print / Tan Arms / Olive Green hands

2

Legs and Light Bluish Gray Hips with Rebel Flight Suit Print

2

Torso Rebel Pilot Flight Suit Print / Orange Arms / White Hands

1

Legs and Tan Hips with Jedi Robes Print

1

MINI LOWER PART NO. 1073

3

MINI LOWER PART NO. 932

1

MINI LOWER PART, NO. 1124

1

MINI UPPER PART NO 3000

1

MINI UPPER PART NO 3002

1

MINI UPPER PART NO 3004

1

MINI UPPER PART, NO. 3556

1

Minifig Hair Female Short with Braid around Sides, Hole On Top

1

Torso SW Jacket with Rebel Logo, 2 Pockets Front- Seams and Wrinkles Back - Olive Green Scarf on Both Sides / Dark Tan Arms / Light Flesh Hands

1

Torso SW Mandarin Collar and Reddish Brown Utility Belt with Pouches and Buckle Front and Cross-strap and Buckles Back / Dark Tan Arms / Light Flesh Hands [Resistance Soldier]

2

Legs and Hips [Complete Assembly]

2

Legs Short [without Hole]

2

MINI HEAD NO 1807

1

MINI HEAD, NO. 2348

1

MINI LOWER PART NO. 1125

3

Minifig Hair Male

1

Minifig Head Wookiee with Silver Bandolier / Black Nose Print

1

Torso Plain / Reddish Brown Arms / Reddish Brown Hands

1

Torso SW Armor and Robe Jedi Knight Print / Olive Green Arms / Reddish Brown Hands

1

Torso SW Jawa with Dark Brown and Black Pouches and Straps Print / Reddish Brown Arms / Dark Brown Hands

1

Torso SW Jawa with Dark Brown Pouches and Black and Gold Straps Print / Reddish Brown Arms / Dark Brown Hands

10

Arm Mechanical [Battle Droid]

1

Legs and Dark Red Hips with SW Silver Armor Print

2

Legs and Hips with SW Large Pockets Print (Imperial Crew)

3

MINI UPPER PART NO 3145

2

Minifig Hair Short, Tousled with Side Part

1

Minifig Head Male Scars Gray Left & Right, Gray Eyebrows, White Pupils Print (Darth Vader 852554) [Blocked Open Stud]

1

Torso SW Armor Plates Dark Green Print Dual Sided (Boba Fett) / Sand Blue Arms Printed / Light Bluish Gray Hands

1

Torso SW AT-AT Driver with Sand Blue Vest and Bib with Breathing Apparatus Print / Sand Blue Arms / Light Bluish Gray Hands

2

Torso SW Imperial Crew Uniform with Black Belt Print / Light Bluish Gray Arms / Light Flesh Hands

4

Arm Mechanical [Thick Support]

4

Arm Mechanical [Thin Support]

4

Legs and Hips [Complete Assembly]

1

MINI LOWER PART NO. 931

1

MINI UPPER PART NO 3144

2

MINI UPPER PART NO 3177

1

MINI UPPER PART, NO. 3557

1

Minifig Head Alien with Silver Mask and Red Eyes Print (SW Sith Warrior) [Hollow Stud]

1

Torso Sand Blue Armor Breastplate with Blue and Red General Insignia Print (SW General Veers) / Dark Bluish Gray Arms / Black Hands

1

Torso SW Imperial Officer 5 Print / Dark Bluish Gray Arms / Black Hands

1

MINI HEAD NO 1659

1

MINI HEAD NO 1661

3

MINI HEAD NO 1778

1

MINI HEAD NO 1792

2

MINI HEAD NO 1808

1

MINI HEAD NO. 1941

1

MINI HEAD, NO. 2010

1

Minifig Head Black Eyebrows, Cheek Lines and Headset Print [Hollow Stud]

1

Minifig Head Black Eyebrows, Cheek Lines and Headset with Open Mouth Print [Hollow Stud]

2

Minifig Head Black Eyebrows, Cheek Lines, Black Pupils and Frown Print [Hollow Stud]

10

Minifig Head Black Eyebrows, Cheek, Chin and Forehead Dimple Print [Hollow Stud]

2

Minifig Head Brown Eyebrows, Light Brown Cheek Lines Print [Blocked Open Stud]

1

Minifig Head Dual Sided Brown Eyebrows, Black Eyes, Wrinkles and Smile / Grim Print [Hollow Stud]

1

Minifig Head Dual Sided Cheek Lines, White Pupils, Chin Dimple, Open Mouth / Closed Eyes Carbonite Print (SW Han Solo) [Hollow Stud]

1

Minifig Head Dual Sided Female with Eyelashes, Eye Shadow, Dark Red Lips, Smile / Frown Print [Blocked Open Stud]

1

Minifig Head Dual Sided Male Stern Brown Eyebrows and Pupils / Gray Visor Print [Blocked Open Stud]

3626cpr1438/781

Minifig Head Dual Sided Orange Visor, Brown Eyebrows, Chin Strap, Headset, Smiling / Scared Print (SW Dack Ralter) [Hollow Stud]

1

Minifig Head Dual Sided Orange Visor, Brown Eyebrows, Chin Strap, Headset, Smiling / Scared Print (SW Dack Ralter) [Hollow Stud]

1

Minifig Head Female Both Sides - Dark Tan Eyebrows, Flesh Lips and Cheek Lines / Side A Raised Cheek / Side B Eyebrow Raised (Princess Leia) [Hollow Stud]

4

Minifig Head Male Black Thick Eyebrows, Large Eyes, Cheek Lines Print [Blocked Open Stud]

1

Minifig Head Male Blue Eyes, Deep Brown Wrinkles Print [Blocked Open Stud]

1

Minifig Head Male Brown Eyebrows and Long Sideburns, Frown and Furrowed Brow Print (SW Imperial Officer) [Hollow Stud]

1

Minifig Head Male Brown Eyebrows, White Pupils and Brown Chin Dimple Print (SW Han Solo) [Blocked Open Stud]

1

Minifig Head Male Dark Tan Eyebrows, Wrinkles and Headset Print (SW General Veers) [Hollow Stud]

1

Minifig Head Smile with Teeth, Arched Eyebrows, White Pupils and Scars Print (SW Boba Fett) [Hollow Stud]

1

Minifig Head with Dark Brown Furrowed Eyebrows, White Pupils, Straight Line Mouth (Frown) and Curved Chin Line [Hollow Stud]

1

Minifig Head with Gray Beard and Eyebrows, Lines under Eyes, Furrowed Brow, White Pupils Print [Blocked Open Stud]

1

Hips and Dark Brown Legs with Dark Tan SW Robe print

2

MINI HEAD NO 1809

2

MINI HEAD NO 1810

2

MINI UPPER PART NO 3174

1

Minifig Head Alien Zabrak with Orange Eyes and Dark Tan Markings Print (SW Jedi Knight) [Hollow Stud]

1

Minifig Head Top, SW Zabrak Horns

1

Torso Dual Side SW Jacket Print - Medium Dark Flesh Arms - Light Flesh Hands

1

Torso SW Vest Robe Front with Blue Name Badge over Tan Undershirt Reddish Brown Belt with Buckle - Back with Belt and Straight Center Seam and Angled Side Seams / Tan Arms / Dark Orange Hands

1

Torso SW Front and Back Female Outline - Dark Purple Vest over Sand Green Shirt with Open Collar and Silver Belt Buckle in Front and 2 Straight and 2 Curved Crossing Black Lines in Back / Sand Green Arms / Light Flesh Hands

1

MINI HEAD, NO. 2047

1

Block with Handles and Han Solo in Carbonite Print

1

MINI HEAD NO 1779

1

Legs and Hips with SW Gunbelt Print (Han Solo 7965)

1

Legs and Hips with SW C-3PO Droid Print

1

MINI UPPER PART NO. 3258

1

Minifig Head Modified C-3PO / K-3PO Protocol Droid with Yellow Eyes Print

3

Legs and Hips with Dark Tan Fur Print

1

Legs and Hips [Complete Assembly]

1

MINI LOWER PART NO. 848

2

MINI LOWER PART NO. 962

2

MINI UPPER PART NO 3175

2

MINI UPPER PART NO 3176

3

Minifig Hair Female Ponytail with Tied Sections

1

Minifig Hair Female Short with Braid around Sides, Hole On Top

1

Minifig Hair with 2 Buns, Center Parting (Princess Leia 2011)

3

Minifig Head Modified Wookiee, Chewbacca with Dark Tan Face Fur and Teeth Print

3

Torso Plain / Dark Brown Arms / Dark Brown Hands

1

Torso with SW Robe, Necklace, and Belts over Dark Bluish Gray Tunic Print - Dark Brown Arms - Light Flesh Hands - Lor San Tekka

1

Torso SW Armor Sith Warrior Print / Dark Bluish Gray Arms / Light Bluish Gray Hands

1

Legs and Hips with SW Armor with Silver and Brown Markings Print

2

MINI LOWER PART NO. 846

1

MINI UPPER PART NO 3001

1

Minifig Head Alien with Blue Eyes, Green Markings and Dark Green Lips Print (SW Jedi Consular) [Hollow Stud]

1

Minifig Head Modified Yoda Curved Ears with Black Eyes and White Pupils Print

1

Legs and Hips [Complete Assembly]

1

Legs and Hips with SW AT-AT Driver Print

1

Legs and Hips with SW Boba Fett Armor, Small Dark Red Belt Print

1

Legs and Hips [Complete Assembly]

1

Minifig Alien Head SW Mon Calamari with Small Reddish Brown Skin Texture Markings and Orange and Black Eyes with Eyelids

1

Minifig Hair Smooth Combed Sideways

Panels - Show owned parts

3

Panel 1 x 2 x 1 with Rounded Corners and Central Divider

9

Panel 1 x 2 x 1 [Rounded Corners]

1

Panel 1 x 4 x 3 [Side Supports / Hollow Studs]

5

Panel 1 x 2 x 1 with Rounded Corners and Central Divider

28

Panel 1 x 2 x 1 [Square Corners]

4

Panel 1 x 4 x 1 with Rounded Corners [Thin Wall]

1

Panel 1 x 4 x 2 with Side Supports - Hollow Studs

5

Panel 1 x 2 x 1 [Square Corners]

1

Panel 1 x 2 x 2 [Side Supports / Hollow Studs]

1

Panel 1 x 2 x 1 [Rounded Corners]

1

Panel 1 x 4 x 3 [Hollow Studs]

1

Cylinder Half 4 x 6 x 13 with 1 x 2 Cutout

12

Panel 1 x 1 x 1 Corner

13

Panel 1 x 2 x 1 [Rounded Corners]

12

Panel 1 x 2 x 2 [Side Supports / Hollow Studs]

2

Panel 1 x 2 x 3 [Side Supports / Hollow Studs]

4

Panel 1 x 4 x 1 with Rounded Corners [Thick Wall]

2

Panel 1 x 4 x 1 with Rounded Corners [Thin Wall]

1

Panel 1 x 4 x 3 [Side Supports / Hollow Studs]

4

Panel 2 x 2 x 1 Corner

4

Panel 4 x 4 x 6 Quarter Cylinder

2

Panel 1 x 4 x 1 with Rounded Corners [Thin Wall]

3

Panel 1 x 6 x 5

2

Cylinder Half 3 x 6 x 6 with 1 x 2 Cutout

Plants and Animals - Show owned parts

4

Palm Tree Top

6

Flower Stem

4

Horse Hitching [Studded]

Plates - Show owned parts

23

Plate 1 x 1

4

Plate 1 x 10

282

Plate 1 x 2

27

Plate 1 x 3

16

Plate 1 x 4

31

Plate 1 x 6

31

Plate 1 x 8

16

Plate 2 x 2 Corner

1

Plate 2 x 10

7

Plate 2 x 12

2

Plate 2 x 14

15

Plate 2 x 2

17

Plate 2 x 3

24

Plate 2 x 4

12

Plate 2 x 6

11

Plate 2 x 8

2

Plate 4 x 4

3

Plate 4 x 6

2

Plate 4 x 8

2

Plate 6 x 6

1

Plate 6 x 8

8

Plate 1 x 1

3

Plate 1 x 10

9

Plate 1 x 2

2

Plate 1 x 4

10

Plate 1 x 6

8

Plate 2 x 2 Corner

2

Plate 2 x 12

1

Plate 2 x 2

6

Plate 2 x 3

4

Plate 2 x 4

3

Plate 2 x 6

2

Plate 2 x 3

3

Plate 4 x 4

2

Plate 1 x 1

2

Plate 1 x 3

6

Plate 2 x 2

10

Plate 2 x 4

1

Plate 2 x 2 Corner

4

Plate 2 x 2 Corner

2

Plate 1 x 2

4

Plate 1 x 4

2

Plate 1 x 6

2

Plate 2 x 2 Corner

2

Plate 2 x 6

115

Plate 1 x 1

12

Plate 1 x 10

9

Plate 1 x 12

96

Plate 1 x 2

36

Plate 1 x 3

36

Plate 1 x 4

27

Plate 1 x 6

26

Plate 1 x 8

4

Plate 2 x 2 Corner

7

Plate 2 x 10

12

Plate 2 x 12

2

Plate 2 x 16

16

Plate 2 x 2

19

Plate 2 x 3

6

Plate 2 x 4

9

Plate 2 x 6

2

Plate 2 x 8

5

Plate 3 x 3

4

Plate 4 x 10

14

Plate 4 x 12

3

Plate 4 x 4

8

Plate 4 x 6

7

Plate 4 x 8

4

Plate 6 x 6

2

Plate 1 x 1

2

Plate 1 x 10

25

Plate 1 x 2

16

Plate 1 x 3

7

Plate 1 x 4

23

Plate 1 x 6

2

Plate 1 x 8

11

Plate 2 x 2 Corner

8

Plate 2 x 10

63

Plate 2 x 2

39

Plate 2 x 3

6

Plate 2 x 4

5

Plate 2 x 6

2

Plate 2 x 8

1

Plate 4 x 6

1

Plate 2 x 6

150

Plate 1 x 2

43

Plate 1 x 4

2

Plate 2 x 2

18

Plate 2 x 3

4

Plate 2 x 4

22

Plate 2 x 6

13

Plate 1 x 2

4

Plate 1 x 1

13

Plate 1 x 2

1

Plate 1 x 1

2

Plate 1 x 1

5

Plate 1 x 2

20

Plate 1 x 1

18

Plate 1 x 2

14

Plate 1 x 2

4

Plate 2 x 2 Corner

3

Plate 2 x 10

3

Plate 2 x 4

42

Plate 1 x 1

17

Plate 1 x 10

40

Plate 1 x 12

79

Plate 1 x 2

50

Plate 1 x 3

85

Plate 1 x 4

78

Plate 1 x 6

8

Plate 1 x 8

55

Plate 2 x 2 Corner

19

Plate 2 x 10

40

Plate 2 x 12

28

Plate 2 x 2

113

Plate 2 x 3

34

Plate 2 x 4

67

Plate 2 x 6

29

Plate 2 x 8

25

Plate 3 x 3

1

Plate 4 x 10

8

Plate 4 x 12

15

Plate 4 x 4

1

Plate 4 x 6

20

Plate 4 x 8

5

Plate 6 x 10

11

Plate 6 x 12

15

Plate 6 x 16

14

Plate 6 x 6

7

Plate 6 x 8

6

Plate 8 x 16

3

Plate 8 x 8

53

Plate 1 x 1

8

Plate 1 x 10

90

Plate 1 x 2

8

Plate 1 x 3

100

Plate 1 x 4

61

Plate 1 x 6

28

Plate 1 x 8

11

Plate 2 x 2 Corner

14

Plate 2 x 10

24

Plate 2 x 12

4

Plate 2 x 14

57

Plate 2 x 2

169

Plate 2 x 3

128

Plate 2 x 4

76

Plate 2 x 6

15

Plate 2 x 8

6

Plate 3 x 3

24

Plate 4 x 4 Corner

7

Plate 4 x 10

3

Plate 4 x 12

32

Plate 4 x 4

35

Plate 4 x 6

9

Plate 4 x 8

5

Plate 6 x 10

2

Plate 6 x 12

15

Plate 6 x 6

2

Plate 6 x 8

1

Plate 8 x 8

11

Plate 1 x 2

4

Plate 1 x 4

19

Plate 1 x 2

6

Plate 1 x 4

5

Plate 1 x 6

17

Plate 1 x 1

2

Plate 1 x 10

45

Plate 1 x 2

21

Plate 1 x 3

16

Plate 1 x 4

19

Plate 1 x 6

2

Plate 2 x 2 Corner

14

Plate 2 x 2

12

Plate 2 x 4

3

Plate 2 x 6

37

Plate 1 x 3

4

Plate 1 x 3

12

Plate 1 x 4

5

Plate 2 x 2

Plates Angled - Show owned parts

4

Wedge Plate 2 x 4

4

Wedge Plate 3 x 3 Cut Corner

6

Wedge Plate 4 x 4 Cut Corner

4

Wedge Plate 8 x 3 Left

4

Wedge Plate 8 x 3 Right

1

Wedge Plate 12 x 3 Left

1

Wedge Plate 12 x 3 Right

1

Wedge Plate 3 x 2 Left

1

Wedge Plate 3 x 2 Right

1

Wedge Plate 6 x 3 Left

1

Wedge Plate 6 x 3 Right

10

Wedge Plate 2 x 4

1

Wedge Plate 3 x 2 Left

1

Wedge Plate 3 x 2 Right

2

Wedge Plate 3 x 3 Cut Corner

1

Wedge Plate 3 x 4 with Stud Notches [Reinforced Underside]

1

Wedge Plate 3 x 6 Cut Corners

6

Wedge Plate 4 x 2 Left

6

Wedge Plate 4 x 2 Right

2

Wedge Plate 4 x 6 Cut Corners

2

Wedge Plate 6 x 3 Left

2

Wedge Plate 6 x 3 Right

1

Wedge Plate 8 x 3 Left

1

Wedge Plate 8 x 3 Right

3

Wedge Plate 12 x 3 Left

3

Wedge Plate 12 x 3 Right

1

Wedge Plate 8 x 8 Cut Corner

1

Wedge Plate 2 x 4

6

Wedge Plate 3 x 3 Cut Corner

31

Wedge Plate 2 x 4

55

Wedge Plate 3 x 2 Left

52

Wedge Plate 3 x 2 Right

28

Wedge Plate 3 x 3 Cut Corner

3

Wedge Plate 3 x 4 with Stud Notches

6

Wedge Plate 3 x 4 with Stud Notches [Reinforced Underside]

3

Wedge Plate 3 x 6 Cut Corners

18

Wedge Plate 4 x 2 Left

18

Wedge Plate 4 x 2 Right

20

Wedge Plate 4 x 4 Cut Corner

1

Wedge Plate 4 x 4 with 2 x 2 Cutout

1

Wedge Plate 4 x 6 Cut Corners

6

Wedge Plate 4 x 9 with Stud Notches

56

Wedge Plate 6 x 3 Left

56

Wedge Plate 6 x 3 Right

15

Wedge Plate 6 x 6 Cut Corner

18

Wedge Plate 6 x 12 Left

18

Wedge Plate 6 x 12 Right

6

Wedge Plate 8 x 3 Left

6

Wedge Plate 8 x 3 Right

9

Wedge Plate 8 x 8 Cut Corner

31

Wedge Plate 12 x 3 Left

31

Wedge Plate 12 x 3 Right

2

Wedge Plate 2 x 2 Left

2

Wedge Plate 2 x 2 Right

17

Wedge Plate 2 x 4

4

Wedge Plate 3 x 2 Left

4

Wedge Plate 3 x 2 Right

18

Wedge Plate 3 x 3 Cut Corner

6

Wedge Plate 3 x 4 with Stud Notches

1

Wedge Plate 3 x 4 with Stud Notches [Reinforced Underside]

1

Wedge Plate 3 x 6 Cut Corners

18

Wedge Plate 4 x 2 Left

18

Wedge Plate 4 x 2 Right

2

Wedge Plate 4 x 4 Cut Corner

1

Wedge Plate 4 x 4 with 2 x 2 Cutout

6

Wedge Plate 4 x 6 Cut Corners

11

Wedge Plate 6 x 3 Left

11

Wedge Plate 6 x 3 Right

5

Wedge Plate 8 x 3 Left

5

Wedge Plate 8 x 3 Right

9

Wedge Plate 12 x 3 Left

9

Wedge Plate 12 x 3 Right

2

Wedge Plate 3 x 2 Left

2

Wedge Plate 3 x 2 Right

2

Wedge Plate 8 x 3 Left

2

Wedge Plate 8 x 3 Right

8

Wedge Plate 2 x 4

8

Wedge Plate 3 x 3 Cut Corner

2

Wedge Plate 3 x 6 Cut Corners

3

Wedge Plate 4 x 2 Left

3

Wedge Plate 4 x 2 Right

12

Wedge Plate 4 x 4 Cut Corner

3

Wedge Plate 6 x 3 Left

3

Wedge Plate 6 x 3 Right

1

Wedge Plate 8 x 3 Left

1

Wedge Plate 8 x 3 Right

2

Wedge Plate 8 x 8 Cut Corner

2

Wedge Plate 4 x 6 Cut Corners

2

Wedge Plate 2 x 4

Plates Round and Dishes - Show owned parts

2

Dish 3 x 3 Inverted [Radar]

31

Plate Round 1 x 1 with Solid Stud

43

Plate Round 2 x 2 with Axle Hole Type 1 (+ Opening)

57

Plate Round 2 x 2 with Rounded Bottom [Boat Stud]

2

Plate Round 4 x 4 with Pin Hole

8

Plate Round 1 x 1 with Solid Stud

3

Plate Round 2 x 2 with Axle Hole Type 1 (+ Opening)

2

Plate Round 2 x 2 with Axle Hole Type 1 (+ Opening)

4

Plate Round 2 x 2 with Axle Hole Type 1 (+ Opening)

5

Plate Round 2 x 2 with Rounded Bottom [Boat Stud]

1

Plate Round 2 x 2 with Axle Hole Type 1 (+ Opening)

1

Plate Round 2 x 2 with Rounded Bottom [Boat Stud]

8

Dish 2 x 2 Inverted [Radar]

6

Dish 3 x 3 Inverted [Radar]

4

Dish 4 x 4 Inverted [Radar]

4

Plate Round 1 x 1 with Solid Stud

2

Plate Round 2 x 2 with Axle Hole Type 1 (+ Opening)

6

Plate Round 2 x 2 with Rounded Bottom [Boat Stud]

2

Plate Round Corner 3 x 3

38

Plate Round 1 x 1 with Solid Stud

14

Plate Round 2 x 2 with Axle Hole Type 1 (+ Opening)

41

Plate Round 2 x 2 with Rounded Bottom [Boat Stud]

2

Plate Round Half 3 x 6 with 1 x 2 Cutout

5

Plate Round 1 x 1 with Solid Stud

8

Plate Round Corner 4 x 4

3

Plate Round 1 x 1 with Solid Stud

43

Plate Round 1 x 1 with Solid Stud

3

Dish 4 x 4 Inverted [Radar] with Cockpit Print

1

Dish 6 x 6 Inverted - No Studs with Handle with SW 8 Spoke Radial Cockpit Print

6

Dish 2 x 2 Inverted [Radar]

2

Dish 4 x 4 Inverted [Radar]

88

Plate Round 1 x 1 with Solid Stud

2

Plate Round 2 x 2 with Rounded Bottom [Boat Stud]

4

Plate Round 1 x 1 with Solid Stud

2

Plate Round 2 x 2 with Rounded Bottom [Boat Stud]

4

Dish 2 x 2 Inverted [Radar]

2

Dish 3 x 3 Inverted [Radar]

2

Dish 4 x 4 Inverted [Radar]

3

Dish 4 x 4 Inverted [Radar] with Millennium Falcon Cockpit Print [7965]

71

Plate Round 1 x 1 with Solid Stud

6

Plate Round 2 x 2 with Rounded Bottom [Boat Stud]

7

Dish 2 x 2 Inverted [Radar]

16

Dish 4 x 4 Inverted [Radar]

7

Dish 6 x 6 Inverted (Radar) [Hollow Studs]

1

Dish 10 x 10 Inverted (Radar) with Solid Studs

10

Plate Round 1 x 1 with Open Stud

6

Plate Round 1 x 1 with Solid Stud

7

Plate Round 2 x 2 with Axle Hole Type 1 (+ Opening)

7

Plate Round 2 x 2 with Rounded Bottom [Boat Stud]

15

Plate Round 4 x 4 with 2 x 2 Hole

10

Plate Round 4 x 4 with Pin Hole

14

Plate Round 6 x 6 with Hole

2

Plate Round Corner 2 x 6 Double

2

Plate Round Corner 3 x 3

6

Plate Round Corner 4 x 4

4

Plate Round Half 3 x 6 with 1 x 2 Cutout

7

Dish 2 x 2 Inverted [Radar]

3

Dish 3 x 3 Inverted [Radar]

2

Dish 5 x 5 Scala

7

Dish 6 x 6 Inverted [Radar / Webbed / anti-studs at 90]

71

Plate Round 1 x 1 with Solid Stud

28

Plate Round 2 x 2 with Axle Hole Type 1 (+ Opening)

24

Plate Round 2 x 2 with Rounded Bottom [Boat Stud]

7

Plate Round 4 x 4 with Pin Hole

12

Plate Round Corner 3 x 3

20

Plate Round Corner 4 x 4

87

Plate Round 1 x 1 with Solid Stud

4

Dish 2 x 2 Inverted [Radar]

2

Plate Round 1 x 1 with Open Stud

9

Plate Round 1 x 1 with Solid Stud

11

Plate Round 1 x 1 with Solid Stud

3

Dish 4 x 4 Inverted [Radar]

2

Plate Round 4 x 4 with Pin Hole

2

Plate Round Corner 4 x 4

Plates Special - Show owned parts

6

Bracket 1 x 2 - 1 x 2 Inverted

5

Bracket 1 x 2 - 1 x 4 [Square Corners]

10

Bracket 1 x 2 - 1 x 2

12

Bracket 1 x 2 - 2 x 2 Inverted

63

Bracket 1 x 2 - 2 x 2

4

Bracket 2 x 2 - 2 x 2

2

Bracket 3 x 2 - 2 x 2 [aka Space Seat]

1

Bracket 5 x 2 x 2 1/3 with Inside Stud Holder

6

Plate 2 x 4 [3 Holes]

2

Plate 2 x 6 [5 Holes]

3

Plate 2 x 8 [7 Holes]

8

Plate Special 1 x 1 with Clip Horizontal [Thick Open O Clip]

6

Plate Special 1 x 1 with Clip Horizontal [Thick U Clip]

9

Plate Special 1 x 1 with Clip Light [Thick Ring]

2

Plate Special 1 x 1 with Clip Vertical [Thick U Clip]

2

Plate Special 1 x 2 Side Handle [Free Ends]

1

Plate Special 1 x 2 with 1 Stud with Groove (Jumper)

1

Plate Special 1 x 2 with 1 Stud with Groove and Inside Stud Holder (Jumper)

7

Plate Special 1 x 2 with Arm Up [Horizontal Arm 5mm]

20

Plate Special 1 x 2 with Clip Horizontal on End

15

Plate Special 1 x 2 with Clips Horizontal [Open O Clips]

4

Plate Special 1 x 2 with Door Rail

16

Plate Special 1 x 2 with Handle on End [Closed Ends]

2

Plate Special 1 x 2 with Handles [Flat Ends / Low Attachment]

2

Plate Special 1 x 2 with Mini Blaster

24

Plate Special 1 x 2 [Side Handle Closed Ends]

6

Plate Special 1 x 2 [Top Clip]

2

Plate Special 1 x 8 with Door Rail

3

Plate Special 2 x 2 with 2 Pin Holes

1

Plate Special 2 x 2 with Bar Frame Octagonal, Reinforced, Completely Round Studs

2

Plate Special 2 x 2 with Groove and Center Stud (Jumper)

7

Plate Special 2 x 2 x 0.667 with Two Studs On Side and Two Raised

14

Plate Special 2 x 2 with 1 Pin Hole [Complete Underside Rib]

5

Bracket 1 x 2 - 2 x 2 Inverted

4

Plate 2 x 4 [3 Holes]

21

Plate Special 1 x 2 with Arm Up [Horizontal Arm 5mm]

2

Plate Special 1 x 2 with Arm Up [Horizontal Arm 6mm]

3

Plate Special 1 x 2 with Clips Horizontal [Thick U-Clips]

4

Plate Special 1 x 2 with Pin Hole

1

Plate Special 1 x 2 with Pin Hole on Top

4

Plate Special 2 x 2 with 1 Pin Hole [Split Underside Ribs]

2

Plate Special 2 x 2 with 2 Pin Holes

1

Plate Special 2 x 2 x 0.667 with Two Studs On Side and Two Raised

2

Plate Special 2 x 2 with 1 Pin Hole [Complete Underside Rib]

2

Bracket 1 x 2 - 1 x 2 Inverted

2

Bracket 1 x 2 - 1 x 4 [Rounded Corners]

4

Bracket 1 x 2 - 1 x 2

12

Bracket 1 x 2 - 2 x 2

4

Plate Special 1 x 1 with Clip Horizontal [Thick Open O Clip]

2

Plate Special 1 x 1 with Clip Horizontal [Thick U Clip]

5

Plate Special 1 x 1 with Clip Light [Thick Ring]

2

Plate Special 1 x 2 Side Handle [Free Ends]

8

Plate Special 1 x 2 with 1 Stud with Groove (Jumper)

*4

Plate Special 1 x 2 with 1 Stud without Groove (Jumper)

2

Plate Special 1 x 2 with Arm Up [Horizontal Arm 5mm]

2

Plate Special 1 x 2 with Clips Horizontal [Open O Clips]

6

Plate Special 1 x 2 with Door Rail

6

Plate Special 1 x 2 with Pin Hole on Top

2

Plate Special 1 x 2 [Side Handle Closed Ends]

18

Plate Special 1 x 2 [Top Clip]

3

Plate Special 1 x 4 with 2 Studs

2

Plate Special 1 x 8 with Door Rail

2

Plate Special 2 x 2 with 1 Pin Hole [Split Underside Ribs]

2

Plate Special 2 x 2 x 0.667 with Two Studs On Side and Two Raised

3

Plate Special 2 x 6 x 2/3 [Four Studs on Side]

3

Plate Special 2 x 8 with Door Rail

7

Bracket 1 x 2 - 2 x 2

6

Plate Special 1 x 2 with 1 Stud with Groove and Inside Stud Holder (Jumper)

2

Plate Special 1 x 2 with Arm Up [Horizontal Arm 5mm]

2

Plate Special 1 x 2 with Handle on End [Closed Ends]

20

Plate Special 1 x 2 [Side Handle Closed Ends]

1

Plate Special 2 x 2 with Groove and Center Stud (Jumper)

12

Plate 2 x 2 with Pin on Bottom

2

Plate Special 1 x 2 with 1 Stud with Groove and Inside Stud Holder (Jumper)

1

Plate Special 1 x 2 with Door Rail

2

Plate Special 2 x 2 with Groove and Center Stud (Jumper)

4

Plate Special 1 x 2 with 1 Stud with Groove and Inside Stud Holder (Jumper)

12

Bracket 1 x 2 - 1 x 2 Inverted

5

Bracket 1 x 2 - 1 x 4 [Rounded Corners]

5

Bracket 1 x 2 - 1 x 4 [Square Corners]

10

Bracket 1 x 2 - 1 x 2

24

Bracket 1 x 2 - 2 x 2 Inverted

7

Bracket 1 x 2 - 2 x 2

8

Bracket 1 x 2 - 2 x 4

2

Bracket 3 x 4 - 3 x 4

6

Bracket 5 x 2 x 1 1/3

7

Bracket 5 x 2 x 2 1/3 with Inside Stud Holder

8

Plate 2 x 2 with Pin on Bottom

3

Plate 2 x 4 [3 Holes]

5

Plate 2 x 6 [5 Holes]

6

Plate Special 1 x 1 with Clip Horizontal [Thick Open O Clip]

2

Plate Special 1 x 1 with Clip Light [Thick Ring]

18

Plate Special 1 x 1 with Clip Vertical [Thick Open O Clip]

6

Plate Special 1 x 1 with Clip Vertical [Thin U Clip]

2

Plate Special 1 x 2 5.9mm End Cup

4

Plate Special 1 x 2 Side Handle [Free Ends]

21

Plate Special 1 x 2 with 1 Stud with Groove (Jumper)

13

Plate Special 1 x 2 with 1 Stud with Groove and Inside Stud Holder (Jumper)

201

Plate Special 1 x 2 with Clip Horizontal on End

21

Plate Special 1 x 2 with Clips Horizontal [Open O Clips]

55

Plate Special 1 x 2 with Door Rail

20

Plate Special 1 x 2 with Handle on End [Closed Ends]

22

Plate Special 1 x 2 with Pin Hole

27

Plate Special 1 x 2 [Side Handle Closed Ends]

42

Plate Special 1 x 2 [Top Clip]

19

Plate Special 1 x 4 with 2 Studs

24

Plate Special 1 x 8 with Door Rail

16

Plate Special 2 x 2 with 2 Pin Holes

2

Plate Special 2 x 2 with Grills

16

Plate Special 2 x 2 with Groove and Center Stud (Jumper)

2

Plate Special 2 x 2 with Wheel Holders

8

Plate Special 2 x 2 x 0.667 with Two Studs On Side and Two Raised

4

Plate Special 2 x 4 with Pins

6

Plate Special 3 x 2 with Hole

4

Plate Special 4 x 4 with 2 x 2 Cutout

2

Plate Special 6 x 6 x 2/3 Cross with Dome

31

Plate Special 2 x 2 with 1 Pin Hole [Complete Underside Rib]

15

Bracket 1 x 2 - 1 x 2 Inverted

7

Bracket 1 x 2 - 2 x 2

15

Bracket 1 x 2 - 2 x 4

7

Bracket 3 x 2 x 1 1/3

1

Plate 2 x 2 with 2 Pins

17

Plate 2 x 4 [3 Holes]

6

Plate 2 x 8 [7 Holes]

4

Plate Special 1 x 1 with Clip Horizontal [Thick Open O Clip]

6

Plate Special 1 x 1 with Clip Light [Thick Ring]

21

Plate Special 1 x 1 with Clip Vertical [Thick Open O Clip]

2

Plate Special 1 x 1 with Clip Vertical [Thick U Clip]

19

Plate Special 1 x 2 Side Handle [Free Ends]

22

Plate Special 1 x 2 with 1 Stud with Groove (Jumper)

4

Plate Special 1 x 2 with 1 Stud with Groove and Inside Stud Holder (Jumper)

*9

Plate Special 1 x 2 with 1 Stud without Groove (Jumper)

2

Plate Special 1 x 2 with 5.9mm Centre Side Ball

12

Plate Special 1 x 2 with Arm Up [Horizontal Arm 5mm]

15

Plate Special 1 x 2 with Clip Horizontal on End

30

Plate Special 1 x 2 with Door Rail

137

Plate Special 1 x 2 with Handle on End [Closed Ends]

6

Plate Special 1 x 2 with Handles [Flat Ends / Low Attachment]

15

Plate Special 1 x 2 with Ladder

32

Plate Special 1 x 2 with Pin Hole on Top

2

Plate Special 1 x 2 [Side Handle Closed Ends]

10

Plate Special 1 x 4 Offset

1

Plate Special 1 x 4 with 2 Studs

6

Plate Special 1 x 8 with Door Rail

12

Plate Special 2 x 2 with 1 Pin Hole [Split Underside Ribs]

7

Plate Special 2 x 2 with Groove and Center Stud (Jumper)

4

Plate Special 2 x 4 with Pins

1

Plate Special 3 x 2 with Hole

3

Plate Special 4 x 4 with Clips Horizontal (thick open O clips)

10

Plate Special 2 x 2 with 1 Pin Hole [Complete Underside Rib]

5

Plate Special 2 x 2 with Bar Frame Octagonal, Reinforced, Completely Round Studs

33

Plate Special 1 x 2 with 1 Stud without Groove (Jumper)

2

Plate Special 1 x 2 with Mini Blaster

1

Plate Special 1 x 2 [Top Clip]

Power Functions, Mindstorms and Electric - Show owned parts

4

Electric Power Functions LED Light Unit with Black PF Connector Lead

1

Electric Power Functions IR Speed Remote Control with Dark Bluish Gray Bottom

1

Electric Power Functions Medium Motor 3 x 6 x 3 with Dark Bluish Gray Bottom and 20cm Wire

2

Electric Power Functions Pole Reverser / Polarity Switch with Black Lead

1

Electric Power Functions Servo Motor with Dark Bluish Gray Bottom

1

Electric Power Functions XL Motor 6 x 6 x 6 with Dark Bluish Gray Bottom and 20cm Wire

6

Electric Power Functions Extension Wire with One Light Bluish Gray End [20cm]

Stickers - Show owned parts

37158/99991

Sticker for Set 42077 (37158/6215547)

29421/99991

Sticker for Set 75168

8039stk01/99991

Sticker for Set 8039 - (86449/4550364)

25032/99991

Sticker Sheet for 42050-1

25533/99991

Sticker Sheet for 75135-1

27056/99991

Sticker Sheet for Set 42056

17620/99991

Sticker Sheet for Set 75049 (17620/6074575)

18741/99991

Sticker Sheet for Set 75060-1 (18741/6132160)

21526/99991

Sticker Sheet for Set 75099 - 21526/6116842

25161/99991

Sticker Sheet for Set 75136-1 (25161/6137942)

25804/99991

Sticker Sheet for Set 75140-1 (25804/6142931) International

26812/99991

Sticker Sheet for Set 75149-1 (26812/6152670)

21525/99991

Stickers for set 75099

String, Bands and Reels - Show owned parts

1

Chain 5 links

1

String Cord Thin 50cm

1

String Reel 2 x 2 Holder

2

String with End Studs 11L Overall

2

String with End Studs 31L Overall

2

String with End Studs 41L Overall

4

Rubber Belt Medium [26mm ID] [Round Cross Section]

4

Rubber Belt Small [15mm ID] [Round Cross Section]

1

String Reel 2 x 2 Drum

3

Minifig Chain 16L

Supports, Girders and Cranes - Show owned parts

4

Forklift Fork

1

Metal Hook - Large

2

Support 1 x 1 x 5 1/3 Spiral Staircase Axle

2

Support 2 x 2 x 2 Stand with Reach-Through Center Hole

Technic Axles - Show owned parts

70

Axle 2 Notched

12

Axle 3

61

Axle 4

3

Axle 5

29

Axle 6

13

Axle 8

9

Axle 10

6

Axle 12

1

Axle 32

65

Axle 2 Notched

1

Axle 4

1

Axle 6

2

Axle 8

6

Axle 10

5

Axle 12

5

Axle 3 with Stud

16

Axle 3

17

Axle 5

5

Axle 7

2

Axle 11

4

Axle 4 with Centre Stop

14

Axle 3 with Stud

25

Axle 5 with Stop

29

Axle 3 with Stop

2

Axle 5 with Stop

96

Axle 3

44

Axle 5

21

Axle 7

1

Axle 9

12

Axle 3 with Stud

42

Axle 4 with Stop

15

Axle 5.5 With Stop [Rounded Short End]

17

Axle 8 with Stop

Technic Beams - Show owned parts

10

Beam 1 x 2 Thick

50

Beam 1 x 2 Thick with Pin Hole and Axle Hole

37

Beam 1 x 3 Thick

35

Beam 1 x 5 Thick

10

Beam 1 x 7 Bent (4 - 4) Thick

53

Beam 1 x 7 Thick

6

Beam 1 x 9 Bent (6 - 4) Thick

46

Beam 1 x 9 Thick

37

Beam 1 x 11 Thick

20

Beam 1 x 11.5 Double Bent Thick

3

Beam 1 x 13 Thick

51

Beam 1 x 15 Thick

19

Beam 2 x 4 L-Shape Thick

6

Beam 3 x 3 T-Shape Thick

50

Beam 3 x 5 L-Shape Thick

32

Beam 1 x 2 Thin

50

Beam 1 x 3 Thin

21

Beam 1 x 4 Thin

23

Beam 1 x 4 Thin with Stud Connector

14

Beam 1 x 5 Thin

22

Beam 1 x 5 Thin with Axle Holes on Ends

22

Beam 1 x 6 Thin

10

Beam 1 x 7 Thin

10

Beam 3 x 3 L-Shape Thin

2

Beam 3 x 3 L-Shape with Quarter Ellipse Thin

14

Beam 3 x 5 L-Shape with Quarter Ellipse Thin

4

Beam 5 x 7 L-Shape with Quarter Ellipse Thin

12

Beam Triangle Thin [Type II]

2

Beam Triangle Thin [Type I]

4

Beam 1 x 2 Thick

4

Beam 1 x 9 Bent (6 - 4) Thick

4

Beam 1 x 11.5 Double Bent Thick

4

Beam 1 x 3 Thin

6

Beam 1 x 2 Thick

5

Beam 1 x 3 Thick

2

Beam 1 x 7 Bent (4 - 4) Thick

12

Beam 1 x 9 Bent (7 - 3) Thick

2

Beam 1 x 11 Thick

4

Beam 1 x 11.5 Double Bent Thick

12

Beam 1 x 15 Thick

4

Beam 2 x 4 L-Shape Thick

20

Beam 1 x 2 Thin

6

Beam 1 x 3 Thin

18

Beam 1 x 4 Thin with Stud Connector

4

Beam 3 x 3 L-Shape Thin

2

Beam 1 x 4 Thin with Stud Connector

1

Beam 1 x 5 Thin

2

Beam 1 x 3 Thin

3

Beam 1 x 5 Thin

7

Beam 1 x 2 Thick

2

Beam 1 x 7 Bent (4 - 4) Thick

4

Beam 3 x 3 T-Shape Thick

10

Beam 1 x 3 Thin

7

Beam 1 x 4 Thin

2

Beam 1 x 4 Thin with Stud Connector

11

Beam 1 x 5 Thin

2

Beam 3 x 3 L-Shape Thin

2

Beam 3 x 5 L-Shape with Quarter Ellipse Thin

12

Beam Triangle Thin [Type II]

1

Beam Triangle Thin [Type I]

13

Beam 1 x 3 Thick

5

Beam 1 x 5 Thick

28

Beam 1 x 7 Bent (4 - 4) Thick

12

Beam 1 x 7 Thick

8

Beam 1 x 9 Bent (7 - 3) Thick

23

Beam 1 x 9 Thick

15

Beam 1 x 11 Thick

10

Beam 1 x 13 Thick

21

Beam 1 x 15 Thick

2

Beam 2 x 4 L-Shape Thick

6

Beam 3 x 5 L-Shape Thick

28

Beam 1 x 2 Thin

10

Beam 1 x 3 Thin

16

Beam 1 x 4 Thin

3

Beam 1 x 3 Thick

10

Beam 1 x 9 Bent (7 - 3) Thick

8

Beam 1 x 11.5 Double Bent Thick

7

Beam 2 x 4 L-Shape Thick

2

Beam 3 x 5 L-Shape Thick

25

Beam 1 x 3 Thin

4

Beam 1 x 4 Thin with Stud Connector

2

Beam 1 x 7 Thin

6

Beam 3 x 3 L-Shape Thin

*2

Beam 3 x 3 L-Shape with Quarter Ellipse Thin

*2

Beam Triangle Thin [Type I]

60

Beam 1 x 2 Thick with Pin Hole and Axle Hole

22

Beam 1 x 3 Thick

2

Beam 1 x 7 Bent (4 - 4) Thick

14

Beam 1 x 7 Thick

4

Beam 1 x 9 Bent (6 - 4) Thick

2

Beam 1 x 9 Bent (7 - 3) Thick

10

Beam 1 x 11 Thick

10

Beam 1 x 11.5 Double Bent Thick

10

Beam 1 x 13 Thick

10

Beam 1 x 15 Thick

12

Beam 2 x 4 L-Shape Thick

14

Beam 3 x 5 L-Shape Thick

2

Beam 1 x 3 Thick

8

Beam 1 x 5 Thick

6

Beam 1 x 7 Bent (4 - 4) Thick

10

Beam 1 x 7 Thick

12

Beam 1 x 9 Bent (7 - 3) Thick

3

Beam 1 x 11 Thick

6

Beam 1 x 11.5 Double Bent Thick

14

Beam 1 x 15 Thick

4

Beam 2 x 4 L-Shape Thick

4

Beam 3 x 5 L-Shape Thick

10

Beam 1 x 3 Thin

4

Beam 1 x 5 Thin

10

Beam 3 x 3 L-Shape Thin

16

Beam 1 x 2 Thick

6

Beam 1 x 2 Thick with Pin Hole and Axle Hole

15

Beam 1 x 3 Thick

22

Beam 1 x 5 Thick

6

Beam 1 x 7 Bent (4 - 4) Thick

32

Beam 1 x 7 Thick

22

Beam 1 x 9 Bent (6 - 4) Thick

8

Beam 1 x 9 Bent (7 - 3) Thick

6

Beam 1 x 9 Thick

18

Beam 1 x 11 Thick

11

Beam 1 x 11.5 Double Bent Thick

16

Beam 1 x 13 Thick

2

Beam 1 x 15 Thick

27

Beam 2 x 4 L-Shape Thick

6

Beam 3 x 3 T-Shape Thick

15

Beam 3 x 5 L-Shape Thick

18

Beam 1 x 2 Thin

14

Beam 1 x 3 Thin

28

Beam 1 x 4 Thin with Stud Connector

10

Beam 1 x 5 Thin

26

Beam 1 x 5 Thin with Axle Holes on Ends

2

Beam 1 x 6 Thin

6

Beam 3 x 3 L-Shape Thin

5

Beam 3 x 5 L-Shape with Quarter Ellipse Thin

10

Beam Triangle Thin [Type II]

2

Beam Triangle Thin [Type I]

4

Beam 1 x 2 Thick with Pin Hole and Axle Hole

6

Beam 1 x 3 Thick

18

Beam 1 x 5 Thick

3

Beam 1 x 7 Thick

8

Beam 1 x 9 Thick

4

Beam 1 x 11.5 Double Bent Thick

8

Beam 1 x 13 Thick

26

Beam 2 x 4 L-Shape Thick

8

Beam 3 x 5 L-Shape Thick

21

Beam 1 x 2 Thin

8

Beam 1 x 3 Thin

13

Beam 3 x 3 L-Shape Thin

10

Beam 3 x 5 L-Shape with Quarter Ellipse Thin

4

Beam Triangle Thin [Type II]

4

Beam Rotor 3 Blade Thin

14

Beam 1 x 5 Thick

15

Beam 1 x 7 Thick

20

Beam 1 x 11 Thick

8

Beam 2 x 4 L-Shape Thick

14

Beam 3 x 5 L-Shape Thick

4

Beam 1 x 7 Thick

3

Beam 1 x 13 Thick

Technic Beams Special - Show owned parts

4

Beam 1 x 2 with Ball Joint Straight

24

Beam 3 x 0.5 Liftarm with Boss and Pin / Crank

*2

Beam 3 x 0.5 Liftarm with Boss and Pin Semi-Reduced

*4

Beam 5 x 7 Open Center Thick

1

Pin Connector Double with Bar

6

Beam 1 x 7 with Fan

2

Beam 3 x 0.5 Liftarm with Boss and Pin / Crank

13

Beam 3 x 0.5 Liftarm with Boss and Pin / Crank

19

Beam 5 x 7 Open Center Thick

3

Beam 5 x 11 Open Center Frame Thick

6

I Beam 3 x 5 Thick [90 Offset Centre Beam Holes]

14

Rotation Joint Disk with Pin and 3L Beam Thick

14

Rotation Joint Disk with Pin Hole and 3L Beam Thick

Technic Bricks - Show owned parts

17

Brick 1 x 2 with Axle Hole Type 1 [+ Opening] and Bottom Pin

20

Brick 1 x 2 [1 Hole]

21

Brick 1 x 2 [2 Holes]

4

Brick 1 x 4 [3 Holes]

6

Brick 1 x 6 [5 Holes]

8

Brick 1 x 8 [7 Holes]

12

Brick 1 x 10 [9 Holes]

1

Brick 1 x 12 [11 Holes]

2

Brick 1 x 14 [13 Holes]

4

Brick 4 x 6 Open Center

6

Brick 5 x 5 Right Angle (1 x 4 - 1 x 4)

2

Pin Connector Block 1 x 5 x 3

6

Brick 1 x 1 with Hole

2

Brick 1 x 4 [3 Holes]

1

Brick 1 x 2 [1 Hole]

5

Brick 1 x 2 [2 Holes]

3

Brick 1 x 8 [7 Holes]

2

Brick 1 x 4 [3 Holes]

173

Brick 1 x 1 with Hole

8

Brick 1 x 2 [2 Holes]

6

Brick 1 x 1 with Hole

2

Brick 1 x 2 [1 Hole]

1

Brick 1 x 2 [2 Holes]

20

Brick 1 x 4 [3 Holes]

2

Brick 1 x 4 [3 Holes]

29

Brick 1 x 1 with Hole

19

Brick 1 x 2 with Axle Hole Type 1 [+ Opening] and Bottom Pin

*8

Brick 1 x 2 with Axle Hole Type 2 [X Opening]

36

Brick 1 x 2 [1 Hole]

10

Brick 1 x 2 [2 Holes]

1

Brick 1 x 4 [3 Holes]

25

Brick 1 x 6 [5 Holes]

15

Brick 1 x 8 [7 Holes]

23

Brick 1 x 10 [9 Holes]

41

Brick 1 x 12 [11 Holes]

9

Brick 1 x 16 [15 Holes]

4

Brick 4 x 4 Open Center

16

Brick 4 x 6 Open Center

7

Brick 6 x 8 with Open Center 4 x 6

8

Pin Connector Block 1 x 5 x 3

10

Brick 1 x 1 with Hole

6

Brick 1 x 2 with Axle Hole Type 1 [+ Opening] and Bottom Pin

12

Brick 1 x 2 [1 Hole]

14

Brick 1 x 2 [2 Holes]

14

Brick 1 x 4 [3 Holes]

30

Brick 1 x 6 [5 Holes]

10

Brick 1 x 12 [11 Holes]

11

Brick 1 x 14 [13 Holes]

16

Brick 1 x 16 [15 Holes]

2

Brick 1 x 2 with Axle Hole Type 1 [+ Opening] and Bottom Pin

Technic Bushes - Show owned parts

17

Bush

9

Bush

31

Bush 1/2 Smooth with Axle Hole Semi-Reduced

53

Bush 1/2 Smooth with Axle Hole Semi-Reduced

78

Bush

83

Bush 1/2 Smooth with Axle Hole Semi-Reduced

Technic Connectors - Show owned parts

1

Axle 1.5 with Perpendicular Axle Connector ( Pole Reverser Handle)

17

Axle and Pin Connector Angled #1

8

Axle and Pin Connector Angled #2 - 180

12

Axle and Pin Connector Angled #3 - 157.5

10

Axle and Pin Connector Angled #4 - 135

14

Axle and Pin Connector Angled #5 - 112.5

4

Axle and Pin Connector Angled #6 - 90

36

Axle and Pin Connector Perpendicular

78

Axle and Pin Connector Perpendicular 3L with 2 Pin Holes

25

Axle and Pin Connector Perpendicular 3L with Centre Pin Hole

14

Axle and Pin Connector Perpendicular Double

10

Axle and Pin Connector Perpendicular Double Split

4

Axle and Pin Connector Perpendicular Split

19

Axle and Pin Connector Perpendicular Triple

10

Axle and Pin Connector Toggle Joint Smooth

10

Axle Connector 2 x 3 with Ball Socket, Open Lower Axle Holes

2

Axle Connector Double Flexible [Rubber]

1

Axle Connector Ridged [with x Hole x Orientation]

40

Axle Connector Smooth [with x Hole + Orientation]

6

Axle Connector with Axle Hole

2

Connector Block 3 x 3 Triangular

5

Pin Connector 3L with 2 Pins and Center Hole

84

Pin Connector Hub with 1 Pin with Friction Ridges Lengthwise

2

Pin Connector Hub with 2 Pins with Friction Ridges Lengthwise

6

Pin Connector Perpendicular 2 x 4 Bent - Beam with 90 Hole 4.8

6

Pin Connector Plate 1 x 2 x 1 2/3 [Two Holes On Top]

2

Pin Connector Plate with One Hole (Single on Bottom)

1

Pin Connector Round [No Slot]

12

Pin Connector Round [Slotted]

4

Pin Connector Toggle Joint Smooth Double with 2 Pins

8

Pin Connector Toggle Joint Smooth Double with Axle and Pin Holes

1

Axle and Pin Connector Perpendicular

18

Axle and Pin Connector Angled #1

10

Axle and Pin Connector Angled #2 - 180

16

Axle and Pin Connector Angled #5 - 112.5

2

Axle and Pin Connector Angled #6 - 90

14

Axle and Pin Connector Perpendicular

12

Axle and Pin Connector Perpendicular 3L with 2 Pin Holes

4

Axle and Pin Connector Perpendicular 3L with Centre Pin Hole

8

Axle and Pin Connector Perpendicular Double

12

Axle and Pin Connector Perpendicular Double Split

1

Axle Connector Ridged [with x Hole x Orientation]

13

Driving Ring Connector Smooth

5

Pin Connector Hub with 2 Pins with Friction Ridges Lengthwise

8

Pin Connector Perpendicular Long

1

Pin Connector Plate 1 x 2 x 1 2/3 [Two Holes On Top]

2

Pin Connector Round [Slotted]

2

Axle and Pin Connector Perpendicular

4

Axle and Pin Connector Perpendicular 3L with Pin Hole

4

Axle Connector Ridged [with x Hole x Orientation]

4

Axle Connector with Axle Hole

2

Axle and Pin Connector Angled #5 - 112.5

1

Axle and Pin Connector Perpendicular 3L with Centre Pin Hole

4

Axle and Pin Connector Perpendicular Double Split

15

Axle Connector Smooth [with x Hole + Orientation]

2

Axle Connector with Axle Hole

8

Axle and Pin Connector Angled #1

4

Axle and Pin Connector Angled #2 - 180

4

Axle and Pin Connector Angled #6 - 90

8

Axle and Pin Connector Perpendicular

6

Axle and Pin Connector Perpendicular 3L with Centre Pin Hole

1

Driving Ring Connector

1

Pin Connector Round [No Slot]

15

Pin Connector Round [Slotted]

8

Axle and Pin Connector Angled #1

*1

Axle and Pin Connector Angled #2 - 180

5

Axle and Pin Connector Angled #3 - 157.5

3

Axle and Pin Connector Angled #5 - 112.5

6

Axle and Pin Connector Perpendicular

3

Axle and Pin Connector Perpendicular 3L with Centre Pin Hole

*1

Axle and Pin Connector Perpendicular Double

*2

Axle Connector Block 3 x 6 with 6 Axleholes

2

Axle Connector Ridged [with x Hole x Orientation]

2

Axle Connector with Axle Hole

*2

Block 3 x 6 x 1 & 2/3

*1

Pin Connector Block 3 x 3 x 1

5

Pin Connector Round 1L [Beam]

2

Pin Connector Round [No Slot]

21

Axle and Pin Connector Angled #1

2

Axle and Pin Connector Angled #4 - 135

8

Axle and Pin Connector Perpendicular

15

Axle Connector Smooth [with x Hole + Orientation]

4

Pin Connector Round [Slotted]

8

Axle and Pin Connector Angled #3 - 157.5

56

Axle and Pin Connector Perpendicular

2

Axle and Pin Connector Perpendicular 3L with 2 Pin Holes

45

Axle and Pin Connector Perpendicular 3L with Centre Pin Hole

6

Axle and Pin Connector Perpendicular Double 4L

6

Axle and Pin Connector Perpendicular Double Split

2

Axle and Pin Connector Perpendicular Split

37

Axle and Pin Connector Perpendicular Triple

6

Axle Connector Hub with 3 Axles at 120

18

Axle Connector Smooth [with x Hole + Orientation]

15

Axle Connector with Axle Hole

4

Pin Connector Hub Perpendicular 3 x 3 Bent with 4 Pins

33

Pin Connector Hub Perpendicular 3L with 4 Pins

4

Pin Connector Hub with 1 Axle

31

Pin Connector Hub with 2 Pins with Friction Ridges Lengthwise

4

Pin Connector Perpendicular 2 x 2 Bent

2

Pin Connector Perpendicular Long

28

Pin Connector Round [Slotted]

12

Axle 1.5 with Perpendicular Axle Connector ( Pole Reverser Handle)

16

Axle and Pin Connector Angled #1

2

Axle and Pin Connector Angled #4 - 135

4

Axle and Pin Connector Angled #6 - 90

4

Axle and Pin Connector Block 4 x 3 x 2 1/2 [Linear Actuator Holder]

22

Axle and Pin Connector Perpendicular

6

Axle and Pin Connector Perpendicular 3L with 2 Pin Holes

2

Axle and Pin Connector Perpendicular Double

15

Axle and Pin Connector Perpendicular Double Split

4

Axle Connector 2 x 3 with Ball Socket, Closed Sides, Squared Ends

24

Axle Connector Smooth [with x Hole + Orientation]

4

Pin Connector Hub with 2 Perpendicular Axles

19

Pin Connector Plate 1 x 2 x 1 2/3 [Two Holes On Top]

34

Pin Connector Round 1L [Beam]

2

Pin Connector Round [Slotted]

4

Axle Connector 2 x 3 Quadruple

4

Pin Connector Round [Slotted]

2

Axle and Pin Connector Angled #1

42003/3217

Axle and Pin Connector Perpendicular 3L with 2 Pin Holes

6

Axle and Pin Connector Angled #3 - 157.5

Technic Gears - Show owned parts

2

Gear 8 Tooth

15

Gear 12 Tooth Double Bevel

6

Gear 20 Tooth Double Bevel with Axle Hole Type 1 [+ Opening]

2

Gear 36 Tooth Double Bevel

4

Gear Rack 1 x 7 with Axle and Pin Holes

2

Gear Rack 1 x 8 with Holes

9

Gear Rack 1 x 13 with Axle and Pin Holes

18

Gear Rack 1 x 4

5

Knob Wheel

2

Driving Ring 2L

3

Gear 8 Tooth No Friction

8

Gear 16 Tooth with Clutch on Both Sides

1

Gear 8 Tooth

1

Gear 12 Tooth Bevel

1

Gear 20 Tooth Bevel

1

Gear 20 Tooth Double Bevel with Axle Hole Type 2 [X Opening]

4

Gear Rack 1/4 Circle 11X11

12

Knob Wheel

4

Gear 24 Tooth Clutch with Dark Bluish Gray Center

22

Gear 12 Tooth Bevel

6

Gear 20 Tooth Bevel

*2

Gear 24 Tooth [New Style with Single Axle Hole][Type 1]

10

Driving Ring Extension

17

Gear 16 Tooth Reinforced [New Style]

4

Gear 20 Tooth Bevel with Pin Hole

2

Gear Rack 1 x 4

4

Worm Gear

2

Differential with Inner Tabs and Closed Center- 28 Bevel Teeth

3

Driving Ring 3L

7

Gear 8 Tooth [Reinforced]

2

Gear 24 Tooth [New Style with Single Axle Hole][Type 1]

2

Gear 24 Tooth [New Style with Single Axle Hole][Type 2]

6

Driving Ring Extension

Technic Panels - Show owned parts

8

Panel Curved 3 x 13

6

Panel Curved 7 x 3 with 2 Pin Holes through Panel Surface

4

Panel Curved 11 x 3 with 10 Pin Holes through Panel Surface

6

Panel Curved 11 x 3 with 2 Pin Holes through Panel Surface

8

Panel Curved and Bent 6 x 3

4

Panel Fairing # 1 Small Smooth Short, Side A

4

Panel Fairing # 2 Small Smooth Short, Side B

4

Panel Fairing # 3 Small Smooth Long, Side A

4

Panel Fairing # 4 Small Smooth Long, Side B

3

Panel Fairing # 6 Long Smooth, Side B

3

Panel Fairing #17 Large Smooth, Side A

3

Panel Fairing #18 Large Smooth, Side B

15

Panel Fairing #21 Very Small Smooth, Side B

1

Panel Fairing #22 Large Short, Small Hole, Side A

15

Panel Fairing #22 Very Small Smooth, Side A

1

Panel Fairing #23 Large Short, Small Hole, Side B

3

Panel Fairing #5 Long Smooth, Side A

8

Panel 3 X 11 x 1

12

Panel 1 x 5 x 11

3

Car Spoiler 3 x 8 [Three Holes]

1

Panel Curved and Bent 6 x 3

3

Panel Fairing #21 Very Small Smooth, Side B

3

Panel Fairing #22 Very Small Smooth, Side A

5

Panel Curved 11 x 3 with 2 Pin Holes through Panel Surface

1

Panel Fairing # 1 Large Short, Large Holes, Side A

2

Panel Fairing # 1 Small Smooth Short, Side A

1

Panel Fairing # 2 Large Short, Large Holes, Side B

2

Panel Fairing # 2 Small Smooth Short, Side B

3

Panel Fairing # 3 Large Long, Large Holes, Side A

5

Panel Fairing # 3 Small Smooth Long, Side A

3

Panel Fairing # 4 Large Long, Large Holes, Side B

5

Panel Fairing # 4 Small Smooth Long, Side B

2

Panel Fairing # 5 Small Short, Large Hole, Side A

2

Panel Fairing # 6 Long Smooth, Side B

2

Panel Fairing # 6 Small Short, Large Hole, Side B

3

Panel Fairing # 7 Small Long, Large Hole, Side A

3

Panel Fairing # 8 Small Long, Large Hole, Side B

2

Panel Fairing #13 Large Short Smooth, Side A

2

Panel Fairing #14 Large Short Smooth, Side B

1

Panel Fairing #17 Large Smooth, Side A

1

Panel Fairing #18 Large Smooth, Side B

2

Panel Fairing #20 Large Long, Small Hole, Side A

2

Panel Fairing #21 Large Long, Small Hole, Side B

6

Panel Fairing #21 Very Small Smooth, Side B

3

Panel Fairing #22 Large Short, Small Hole, Side A

6

Panel Fairing #22 Very Small Smooth, Side A

3

Panel Fairing #23 Large Short, Small Hole, Side B

1

Panel Fairing #24 Small Short, Small Hole, Side B

1

Panel Fairing #25 Small Short, Small Hole, Side A

2

Panel Fairing #5 Long Smooth, Side A

5

Panel 1 x 5 x 11

2

Panel Curved 11 x 3 with 2 Pin Holes through Panel Surface

2

Panel Fairing # 1 Small Smooth Short, Side A

2

Panel Fairing # 2 Small Smooth Short, Side B

2

Panel Fairing # 3 Small Smooth Long, Side A

2

Panel Fairing # 4 Small Smooth Long, Side B

4

Panel 5 x 11 x 1 Tapered

2

Panel 1 x 5 x 11

1

Panel Curved 11 x 3 with 2 Pin Holes through Panel Surface

2

Panel Curved and Bent 6 x 3

1

Panel Fairing # 1 Small Smooth Short, Side A

1

Panel Fairing # 2 Small Smooth Short, Side B

3

Panel Fairing # 3 Small Smooth Long, Side A

3

Panel Fairing # 4 Small Smooth Long, Side B

3

Panel Fairing # 5 Small Short, Large Hole, Side A

3

Panel Fairing # 6 Small Short, Large Hole, Side B

3

Panel Fairing #13 Large Short Smooth, Side A

3

Panel Fairing #14 Large Short Smooth, Side B

4

Panel Fairing #17 Large Smooth, Side A

4

Panel Fairing #18 Large Smooth, Side B

4

Panel 5 x 11 x 1 Tapered

2

Panel 3 X 11 x 1

12

Panel Curved 3 x 13

8

Panel Curved 7 x 3 with 2 Pin Holes through Panel Surface

10

Panel Curved 11 x 3 with 2 Pin Holes through Panel Surface

4

Panel Fairing # 1 Small Smooth Short, Side A

4

Panel Fairing # 2 Small Smooth Short, Side B

5

Panel Fairing # 3 Small Smooth Long, Side A

5

Panel Fairing # 4 Small Smooth Long, Side B

2

Panel Fairing #13 Large Short Smooth, Side A

2

Panel Fairing #14 Large Short Smooth, Side B

4

Panel Fairing #17 Large Smooth, Side A

4

Panel Fairing #18 Large Smooth, Side B

9

Panel Fairing #21 Very Small Smooth, Side B

9

Panel Fairing #22 Very Small Smooth, Side A

1

Panel Car Mudguard Arched 15 x 2 x 5 with Vent Grille Print Model Left Side

1

Panel Car Mudguard Arched 15 x 2 x 5 with Vent Grille Print Model Right Side

6

Panel Car Mudguard Arched 15 x 2 x 5

3

Panel 3 X 11 x 1

3

Panel 1 x 5 x 11

4

Panel Fairing # 3 Small Smooth Long, Side A

4

Panel Fairing # 4 Small Smooth Long, Side B

2

Panel Fairing # 5 Small Short, Large Hole, Side A

2

Panel Fairing # 6 Long Smooth, Side B

2

Panel Fairing # 6 Small Short, Large Hole, Side B

1

Panel Fairing #20 Large Long, Small Hole, Side A

1

Panel Fairing #21 Large Long, Small Hole, Side B

2

Panel Fairing #22 Large Short, Small Hole, Side A

2

Panel Fairing #23 Large Short, Small Hole, Side B

2

Panel Fairing #5 Long Smooth, Side A

1

Panel Car Mudguard Left

1

Panel Car Mudguard Right

4

Panel Curved and Bent 6 x 3

2

Panel 1 x 5 x 11

*1

Panel Curved 11 x 3 with 2 Pin Holes through Panel Surface

2

Panel Curved and Bent 6 x 3

4

Engine Block Half / Side Intake Panel

8

Panel Curved 3 x 13

18944/3217

Panel Curved 3 x 13

7

Panel Curved 7 x 3 with 2 Pin Holes through Panel Surface

2

Panel Curved 11 x 3 with 10 Pin Holes through Panel Surface

62531/3213

Panel Curved 11 x 3 with 2 Pin Holes through Panel Surface

2

Panel Fairing # 1 Small Smooth Short, Side A

2

Panel Fairing # 2 Small Smooth Short, Side B

64683/3212

Panel Fairing # 3 Small Smooth Long, Side A

64391/3212

Panel Fairing # 4 Small Smooth Long, Side B

1

Panel Fairing # 6 Long Smooth, Side B

3

Panel Fairing #13 Large Short Smooth, Side A

3

Panel Fairing #14 Large Short Smooth, Side B

1

Panel Fairing #5 Long Smooth, Side A

7

Panel Car Mudguard Arched 15 x 2 x 5

3

Panel 3 X 11 x 1

1

Panel 1 x 5 x 11

3

Panel Curved 11 x 3 with 10 Pin Holes through Panel Surface

1

Panel Fairing #21 Very Small Smooth, Side B

1

Panel Fairing #22 Very Small Smooth, Side A

Technic Pins - Show owned parts

40

Axle Pin 3L with Friction Ridges Lengthwise and 2L Axle

16

Pin Double Triangle 1 x 3 with 2 Clips

2

Pin Double Triangle 1 x 3 with 2 Clips without Center Cut

32

Pin Double with Axle Hole

5

Pin Long with Friction Ridges Lengthwise

65

Pin Long with Friction Ridges Lengthwise and Stop Bush

1398

Pin with Friction Ridges Lengthwise and Center Slots

78

Pin with Friction Ridges Lengthwise and Towball

284

Axle Pin with Friction Ridges Lengthwise

189

Pin 1/2

644

Pin Long with Friction Ridges Lengthwise

128

Pin Long with Friction Ridges Lengthwise and Stop Bush

5

Axle Pin without Friction Ridges Lengthwise

4

Axle Towball

6

Pin 1/2

2

Pin 3/4

25

Axle Pin without Friction Ridges Lengthwise

20

Pin 3/4

28

Pin Long without Friction Ridges

11

Axle Towball

63

Pin 1/2

14

Pin Double with Axle Hole

18

Pin Long with Friction Ridges Lengthwise and Stop Bush

7

Pin without Friction Ridges Lengthwise

80

Axle Pin 3L with Friction Ridges Lengthwise and 1L Axle

33

Pin 3/4

Technic Special - Show owned parts

1

Ball Joint with Through Axle Hole

1

Cam

1

Digger Bucket 4 x 4 x 9 with 3 teeth

1

Digger Bucket 8 x 10

12

Disk 3 x 3

1

Gearbox 4 x 4 x 1 2/3

19

Link, Reinforced, with Beveled Edge

4

Plate 1 x 5 with Smooth Ends, 4 Studs and Centre Axle Hole

2

Turntable Small Base (28 Teeth)

7

Changeover Catch

*4

Link 1 x 16

*2

Link 1 x 16

2

Plate 1 x 5 with Smooth Ends, 4 Studs and Centre Axle Hole

*1

Changeover Catch

4

Gearbox 2 x 4 x 3 1/3

13

Disk 3 x 3

4

Linear Actuator Mini with Dark Bluish Gray Head and Orange Axle

2

Turntable Small Top

2

Brick 1 x 2 with Hole and Dual Beam Extensions

4

Link 1 x 9 Bent (6 - 4)

26

Link Tread Wide with Two Pin Holes, Reinforced

4

Rotor Blade 31L with Beam 3L with Black Rubber Tip

Technic Steering, Suspension and Engine - Show owned parts

2

Link 1 x 6 with Stoppers

6

Link 1 x 6 without Stoppers

4

Link 1 x 9

2

Steering Arm with Pins

6

Steering Wheel Hub Holder with 2 Pin Holes and 2 Axle Holes

1

Steering Wheel Large

16

Wishbone Suspension Arm

6

Shock Absorber 6.5L with Hard Spring

2

Engine Crankshaft

*4

Shock Absorber 6.5L with Normal Spring

6

Engine Crankshaft

26

Engine Piston Round

4

Shock Absorber 6.5L with Hard Spring

10

Engine Crankshaft Center

26

Engine Connecting Rod

14

Engine Cylinder with Side Slots

12

Engine Cylinder without Side Slots, with Bottom Slots

15

Steering / CV Joint

2

Steering Arm 5 x 1 with Towball Socket

1

Steering Knuckle Arm with Ball Joint

6

Steering Portal with 2 Pin Holes

2

Steering Portal with 2 Pin Holes and 2 Ball Joint Arms

3

Steering Wheel Small (3 Studs Diameter)

1

Universal Joint 3L [Complete Assembly]

6

Link 1 x 6 without Stoppers

12

Steering / CV Joint Axle

12

Steering Arm 5.5 x 2 with Towball Socket Rounded, Chamfered

2

Steering Gear with 3 Ball Joints, Compact

12

Steering Hub for Portal Axle

1

Steering Wheel Pilot's Yoke [Hollow Stud, Axle Hole with + Opening]

1

Engine Tunable, Block with Two Round Air Scoops [Fits 2133]

Tiles - Show owned parts

21

Tile 1 x 1 with Groove

14

Tile 1 x 2 with Groove

15

Tile 1 x 4 with Groove

8

Tile 1 x 6 with Groove

8

Tile 1 x 8 with Groove

10

Tile 1 x 3

4

Tile 2 x 2 with Groove

19

Tile 2 x 4 with Groove

1

Tile 8 x 16 with Bottom Tubes

8

Tile Round 1 x 1

3

Tile Round 2 x 2 with Bottom Cross

8

Tile Round 2 x 2 with Bottom Stud Holder

3

Tile 1 x 2 with Groove

2

Tile 1 x 3

1

Tile 2 x 2 with Groove

6

Tile 2 x 4 with Groove

4

Tile 1 x 1 with Groove

*6

Tile Round 1 x 1

4

Tile 1 x 4 with Groove

6

Tile 1 x 6 with Groove

16

Tile 1 x 1 with Groove

24

Tile 1 x 2 with Groove

14

Tile 1 x 4 with Groove

9

Tile 1 x 6 with Groove

29

Tile 1 x 8 with Groove

9

Tile 1 x 3

2

Tile 2 x 2 Corner

4

Tile 2 x 2 with Groove

11

Tile 2 x 4 with Groove

3

Tile Round 1 x 1

2

Tile Round 2 x 2 with Bottom Stud Holder

24

Tile 1 x 2 with Groove

2

Tile 1 x 4 with Groove

10

Tile 1 x 3

2

Tile 2 x 2 with Groove

4

Tile 2 x 4 with Groove

2

Tile 1 x 4 with Groove

2

Tile 1 x 6 with Groove

1

Tile Round 2 x 2 with Bottom Stud Holder

14

Tile 1 x 2 with Groove

1

Tile 2 x 2 with Groove

4

Tile Round 2 x 2 with Bottom Stud Holder

12

Tile 1 x 2 with Groove

3

Tile Round 1 x 1

6

Tile 1 x 2 with Groove

4

Tile Round 1 x 1

2

Tile 1 x 2 with Groove

12

Tile 1 x 2 with Groove

4

Tile 1 x 4 with Groove

10

Tile Round 1 x 1

10

Tile 1 x 1 with Groove

3

Tile 1 x 2 with Groove

9

Tile Round 1 x 1

8

Tile 1 x 2 with Groove

24

Tile Round 1 x 1

3

Tile 1 x 1 with Groove

13

Tile 1 x 1 with Groove

76

Tile 1 x 2 with Groove

20

Tile 1 x 4 with Groove

139

Tile 1 x 6 with Groove

23

Tile 1 x 8 with Groove

91

Tile 1 x 3

14

Tile 2 x 2 Corner

19

Tile 2 x 2 with Groove

30

Tile 2 x 4 with Groove

*3

Tile 6 x 6 with Central Bottom Tube

14

Tile Round 1 x 1

9

Tile Round 2 x 2 with Bottom Cross

10

Tile Round 2 x 2 with Bottom Stud Holder

7

Tile 1 x 1 with Groove

28

Tile 1 x 2 with Groove

14

Tile 1 x 4 with Groove

21

Tile 1 x 6 with Groove

6

Tile 1 x 8 with Groove

10

Tile 1 x 3

22

Tile 2 x 2 with Groove

3

Tile 2 x 4 with Groove

3

Tile Round 2 x 2 with Bottom Cross

11

Tile Round 1 x 1

4

Tile 1 x 2 with Groove

14

Tile Round 1 x 1

6

Tile 1 x 4 with Groove

2

Tile 1 x 3

2

Tile 2 x 2 with Groove

6

Tile Round 1 x 1

17

Tile 1 x 1 with Groove

39

Tile 1 x 2 with Groove

26

Tile 1 x 4 with Groove

29

Tile 1 x 8 with Groove

10

Tile 1 x 3

13

Tile 2 x 2 with Groove

28

Tile 1 x 2 with Groove

2

Tile 2 x 4 with Groove

12

Tile 1 x 2 with Groove

1

Tile 2 x 4 with Groove

2

Tile 1 x 4 with Groove

Tiles Printed - Show owned parts

5

Tile 1 x 1 Round with Porsche RS Print

8

Tile 1 x 2 with Avionics Copper, Red & Silver Print

1

Tile 2 x 2 with Death Star Print

5

Tile 1 x 1 with SW Snowtrooper Backpack Print

1

Tile 1 x 4 with Groove with Porsche 'GT3RS LG-P' and Code Print

2

Tile 1 x 1 Round with Republic Symbol Print

1

Tile 1 x 2 with Stylised Computer Console Print

2

Tile Round 2 x 2 with Bottom Stud Holder with Tie Fighter Mechanical Print

2

Tile Round 2 x 2 with Fine Mesh Grill Print

1

Tile 1 x 2 with Computer Keyboard Standard Print

4

Tile 1 x 2 with Joystick and Vehicle Control Panel Print

1

Tile 2 x 2 with White Stripe and Rectangles (SW Gonk Droid) Print

2

Tile Round 1 x 1 with Cookie Print

2

Tile Round 1 x 1 with Gauge and Red Pointer Print

5

Tile Round 1 x 1 with Thermal Detonator Print

Tiles Special - Show owned parts

25

Tile Special 1 x 1 with Clip and Straight Tips

2

Tile Special 1 x 1 with Clip with Rounded Edges

44

Tile Special 1 x 2 Grille with Bottom Groove

7

Tile Special 1 x 2 with Handle

3

Tile Special 2 x 2 with Pin

2

Tile Special 4 x 4 with Studs on Edge

6

Tile Special 1 x 2 Grille with Bottom Groove

2

Tile 2 x 2 Round with Center Stud

29

Tile Special 1 x 2 Grille with Bottom Groove

2

Tile Special 1 x 2 with Handle

4

Tile Special 2 x 2 Inverted

4

Tile Special 6 x 12 with Studs on Edges

2

Tile Special 1 x 2 Grille with Bottom Groove

5

Tile Special 1 x 2 with Handle

8

Tile Special 2 x 2 Inverted

4

Tile Special 1 x 2 Grille with Bottom Groove

6

Tile Round 8 x 8

3

Tile Special 1 x 1 with Clip with Rounded Edges

5

Tile Special 1 x 1 with Clip with Rounded Tips

66

Tile Special 1 x 2 Grille with Bottom Groove

1

Tile Special 1 x 2 with Handle

4

Tile Special 2 x 2 with Pin

9

Tile Special 4 x 3 with 4 Studs in Centre

9

Tile Special 4 x 4 with Studs on Edge

24

Tile Special 4 x 6 with Studs on Edges

5

Tile Special 6 x 12 with Studs on Edges

3

Tile 2 x 2 Round with Center Stud

3

Tile 2 x 2 Round with Hole

18

Tile Special 1 x 1 with Clip and Straight Tips

43

Tile Special 1 x 1 with Clip with Rounded Edges

13

Tile Special 1 x 1 with Clip with Rounded Tips

120

Tile Special 1 x 2 Grille with Bottom Groove

21

Tile Special 1 x 2 with Handle

9

Tile Special 2 x 2 Inverted

11

Tile Special 2 x 2 with Pin

5

Tile Special 2 x 3 with 2 Clips [Thick Open O Clips]

7

Tile Special 4 x 4 with Studs on Edge

61

Tile Special 1 x 2 Grille with Bottom Groove

1

Tile Special 1 x 1 with Clip with Rounded Edges

9

Tile Special 1 x 2 Grille with Bottom Groove

1

Tile Special 1 x 1 with Clip with Rounded Edges

Tools - Show owned parts

10

Brick and Axle Separator v2.0

Transportation - Land - Show owned parts

2

Fairing 1 x 4 Side Flaring Intake with Two Pins

1

Minifig Handlebars

6

Minifig Seat 2 x 2 with Center Sprue Mark

1

Roll Cage 6 x 4 x 3 1/3

1

Vehicle, Forklift Wide 1 x 2 Hinge Plate Locking with Rubber Belt Holder

2

Fairing 1 x 4 Side Flaring Intake with Two Pins

6

Minifig Seat 2 x 2 with Center Sprue Mark

1

Minifig Handlebars

2

Mudguard 1 1/2 x 6 x 1 [Arch Extended]

2

Vehicle Mudguard 3 x 4 x 1 2/3 Curved Front

1

Vehicle, Forklift Wide Forks Reinforced [with Rubber Belt Holder]

2

Vehicle, Spoiler 2 x 4 with Handle

2

Wedge 4 x 3 Open with Cutout and Four Studs [Wheel Arch]

4

Mudguard 4 x 2 1/2 x 2 with Arch Round

1

Minifig Seat 2 x 2

2

Mudguard 4 x 2 1/2 x 2 with Arch Round

Transportation - Sea and Air - Show owned parts

2

Propeller 3 Blade Small

8

Cylinder 4 x 4 with Pin Holes and Centre Bar

3

Cylinder 4 x 4 with Pin Holes and Centre Bar

8

Cylinder 4 x 4 with Pin Holes and Centre Bar

2

Cylinder 4 x 4 with Pin Holes and Centre Bar

1

Engine Centre - Smooth Large

1

Propeller 8 Blade 5 Diameter

2

Jet Engine Fan with 10 Blades and Pin

2

Tail Shuttle

4

Tail Shuttle - Small

Tubes and Hoses - Show owned parts

2

Hose Soft Axle 7

1

Hose Soft Axle 16

2

Hose, Ribbed 7mm D. 2L

1

Hose, Ribbed 7mm D. 9L

2

Hose, Ribbed 7mm D. 2L

*1

Hose, Rigid 3mm D. 7L / 5.6cm

*1

Hose, Rigid 3mm D. 9L / 7.2cm

2

Hose, Ribbed 7mm D. 2L

*2

Hose Soft Axle 7

3

Hose Soft Axle 19

2

Hose, Ribbed 7mm D. 4L

*2

Hose, Rigid 3mm D. 11L / 8.8cm

5

Hose Soft Axle 12

7

Hose Soft Axle 19

3

Hose, Ribbed 7mm D. 19L

2

Hose Flexible 12L

4

Hose Soft Axle 11

2

Hose, Ribbed 7mm D. 11L

4

Hose, Ribbed 7mm D. 18L

8

Hose, Ribbed 7mm D. 6L

4

Hose, Ribbed 7mm D. 7L / 5.6cm

Wheels and Tyres - Show owned parts

4

Tire 81.6 x 44 ZR Straight Tread

16

Tread Sprocket Wheel Small

6

Tyre 17.5 x 6 with Shallow Staggered Treads

6

Tyre 49.53 x 20

2

Tyre 56 x 26 Balloon

2

Tyre 68.7 x 34 R

4

Tyre 68.8 x 36 H

4

Tyre 68.8 x 36 ZR

4

Tyre 81.6 x 38 R Balloon

2

Tyre 81.6 x 44 R

4

Wheel 18 x 14 with Axle Hole, Fake Bolts and Shallow Spokes

2

Wheel 30.4 x 20 without Pinholes, with Reinforced Rim

2

Wheel 43.2 x 26 Racing Small with 6 Pinholes

4

Wheel 56 x 36 Racing Medium with 6 Pin Holes

4

Wheel 62.3mm D. x 42mm Racing Large

2

Wheel 31 x 15

4

Wheel 56 x 36 Racing Medium with 6 Pin Holes

2

Wheel 31 x 15

2

Wedge Belt Wheel [aka Pulley]

*2

Wheel 30.4 x 14 VR

12

Wheel 30.4 x 20 without Pinholes, with Reinforced Rim

28

Wheel 11 x 8 with Center Groove

9

Wheel 18 x 14 with Axle Hole, Fake Bolts and Shallow Spokes

5

Wheel 18 x 14 with Pin Hole, Fake Bolts and Shallow Spokes

17

Wheel 30.4 x 20 without Pinholes, with Reinforced Rim

1

Wheel 31 x 15

10

Wheel 43.2 x 26 Racing Small with 3 Pinholes

2

Wheel 62.4 x 20 with Flush Axle Stem

14

Wheel 31 x 15

2

Wheel Hard Plastic Large (54mm D. x 30mm)

2

Wheel Cover 9 Spoke - 18mm D. - for Wheel 55982

Windscreens and Fuselage - Show owned parts

2

Windscreen 7 x 4 x 2 Round with Handle

1

Windscreen 1 x 6 x 3

1

Windscreen 2 x 12 x 4

1

Windscreen 4 x 4 x 1

1

Windscreen 7 x 4 x 1 2/3 with SW Print

1

Windscreen 7 x 4 x 2 Round with Handle

1

Windscreen 10 x 6 x 3 Bubble Canopy Double Tapered with Square Front Cutout and Light Bluish Gray Jedi Starfighter, Two Red Triangles on Top Print

*2

Windscreen 1 x 4 x 1 1/3 with Bottom Hinge

2

Windscreen 3 x 6 x 1 Curved with 2 Circular Stud Holders in Bottom

1

Windscreen 8 x 4 x 2 with Handle and 2 Studs with Silver Cockpit Window Frames with Rivets Print

1

Windscreen 16 x 8 x 6 Curved with 3 Pin Holes

Part Details