Send Message

Please enter name, subject and message below. Include an e-mail address if you wish to get a response. Otherwise that field can be left blank.

Name:

E-mail:

Subject:

Message (use shift+enter for newline):

Send Cancel
Message Sent

The message have now been sent. Thank you for the response.

Close
Failed Sending Message

The system was for some reason not able to sent the message. Please try again later.

Close
Bars, Ladders and Fences:98
Bionicle, Hero Factory and Constraction:96
Bricks
⋅ Standard:458
⋅ Curved:118
⋅ Round and Cones:109
⋅ Sloped:474
⋅ Special:112
⋅ Wedged:22
Containers:3
Flags, Signs, Plastics and Cloth:2
Hinges, Arms and Turntables:242
Magnets and Holders:4
Minifig Accessories:19
Minifigs:22
Non-LEGO:9
Panels:8
Plants and Animals:8
Plates
⋅ Standard:2251
⋅ Angled:97
⋅ Round and Dishes:275
⋅ Special:331
Total number of parts:27652
Pneumatics:51
Power Functions, Mindstorms and Electric:48
String, Bands and Reels:29
Supports, Girders and Cranes:4
Technic
⋅ Axles:2597
⋅ Beams:4121
⋅ ⋅ Special:108
⋅ Bricks:980
⋅ Bushes:1183
⋅ Connectors:3014
⋅ Gears:985
⋅ Panels:432
⋅ Pins:7007
⋅ Special:625
⋅ Steering, Suspension and Engine:608
Tiles
⋅ Standard:463
⋅ Printed:4
⋅ Special:143
Tools:2
Transportation - Land:6
Transportation - Sea and Air:18
Tubes and Hoses:133
Wheels and Tyres:324
Windows and Doors:5
Windscreens and Fuselage:4

Bars, Ladders and Fences - Show owned parts

1

Bar 1 x 3 [Clip / Anti-Stud]

2

Bar 7 x 3 with Double Clips (Ladder)

1

Bar 3L

2

Bar 4L (Lightsaber Blade / Wand)

1

Bar 5L with Handle (Friction Ram)

12

Bar 6L with Stop Ring

2

Lever Small Base with Black Lever

6

Bar 6.6L with Stop Ring [Umbrella Stand]

1

Bar 6.6L with Stop Ring [Umbrella Stand]

3

Spring Shooter Ammuniton 8L

*2

Antenna 1 x 4 with Flat Top

4

Bar 1L with Clip [Cut Edges and One Side Hole]

3

Bar 4L (Lightsaber Blade / Wand)

2

Bar 5L with Handle (Friction Ram)

4

Bar 6L with Stop Ring

3

Lever Small Base with Black Lever

40

Pin 1/2 with 2L Bar Extension

2

Bar 1 x 3 (Radio Handle, Phone Handset)

4

Bar 1 x 8 with Brick 1 x 2 Curved Top End (Axle Holder Inside Small End)

3

Bar 6L with Stop Ring

Bionicle, Hero Factory and Constraction - Show owned parts

13

Tooth 1 x 3 with Axle Hole

12

Tooth 1 x 3 with Axle Hole

12

Tooth 1 x 3 with Axle Hole

4

Bionicle Rahkshi Chest Section

6

Tooth 1 x 3 with Axle Hole

2

Bionicle Shoulder Armour

5

Tooth 1 x 3 with Axle Hole

1

Light Cover with Internal Bar / Bionicle Barraki Eye

4

Light Cover with Internal Bar / Bionicle Barraki Eye

4

Tooth 1 x 3 with Axle Hole

2

Light Cover with Internal Bar / Bionicle Barraki Eye

1

Bionicle Visorak Torso - Beam 8 x 3 x 2

1

Bionicle Rahkshi Torso Lower Section

20

Tooth 1 x 3 with Axle Hole

44140/1486

Bionicle Rahkshi Back Cover with Groove

3

Light Cover with Internal Bar / Bionicle Barraki Eye

Bricks - Show owned parts

17

Brick 1 x 1

13

Brick 1 x 2

16

Brick 1 x 3

14

Brick 1 x 4

10

Brick 1 x 6

11

Brick 1 x 8

4

Brick 2 x 3 without Cross Supports

4

Brick 2 x 4 without Cross Supports

4

Brick 2 x 2

8

Brick 2 x 3

3

Brick 2 x 4

2

Brick 2 x 8

2

Brick 1 x 1

7

Brick 1 x 2

7

Brick 1 x 4

2

Brick 1 x 6

1

Brick 2 x 4 without Cross Supports

1

Brick 2 x 4

10

Brick 1 x 1

13

Brick 1 x 2

2

Brick 1 x 3

7

Brick 1 x 4

6

Brick 1 x 6

6

Brick 1 x 8

2

Brick 2 x 10

4

Brick 2 x 2

1

Brick 2 x 3

3

Brick 2 x 4

10

Brick 1 x 1

4

Brick 1 x 2

8

Brick 1 x 3

5

Brick 1 x 4

2

Brick 1 x 6

32

Brick 1 x 1

30

Brick 1 x 2

9

Brick 1 x 3

21

Brick 1 x 4

19

Brick 1 x 6

12

Brick 1 x 8

2

Brick 2 x 4 without Cross Supports

14

Brick 2 x 2

2

Brick 2 x 8

2

Brick 1 x 1

1

Brick 1 x 2

2

Brick 1 x 3

1

Brick 1 x 4

1

Brick 2 x 2

2

Brick 2 x 4

8

Brick 1 x 4

1

Brick 2 x 2

1

Brick 2 x 4

*4

Brick 1 x 4

2

Brick 1 x 2 x 2 with Inside Axle Holder

2

Brick 1 x 12

11

Brick 1 x 2

2

Brick 1 x 3

6

Brick 1 x 4

31

Brick 1 x 6

4

Brick 2 x 3

16

Brick 2 x 6

2

Brick 1 x 1 x 5 with Solid Stud

4

Brick 1 x 1

5

Brick 1 x 2

Bricks Curved - Show owned parts

12

Slope Curved 3 x 1 No Studs

2

Slope Curved 4 x 1 No Studs [Stud Holder with Asymmetric Ridges]

4

Slope Curved 4 x 1 No Studs [Stud Holder with Symmetric Ridges]

4

Slope Curved 6 x 1

1

Slope Curved 6 x 2

10

Slope Curved 3 x 1 No Studs

10

Slope Curved 4 x 1 No Studs [Stud Holder with Symmetric Ridges]

18

Slope Curved 3 x 1 No Studs

4

Slope Curved 4 x 1 No Studs [Stud Holder with Symmetric Ridges]

4

Brick Arch 1 x 8 x 2 Raised

10

Slope Curved 3 x 1 No Studs

8

Slope Curved 4 x 1 No Studs [Stud Holder with Asymmetric Ridges]

4

Slope Curved 2 x 1 No Studs [1/2 Bow]

2

Brick Arch 1 x 3 x 2 Curved Top

2

Brick Curved 1 x 2 x 1 1/3 with Curved Top

4

Slope Curved 2 x 4 x 2/3 No Studs [Bottom Tubes]

14

Slope Curved 3 x 1 No Studs

2

Slope Curved 4 x 1 No Studs [Stud Holder with Symmetric Ridges]

2

Slope Curved 3 x 1 No Studs

1

Slope Curved 4 x 1 Double No Studs

Bricks Round and Cones - Show owned parts

*11

Brick Round 1 x 1 Solid Stud

14

Brick Round 2 x 2 with Axle Hole

1

Brick Round 4 x 4 [Centre Hole]

2

Brick Round Corner 2 x 2 Macaroni with Stud Notch

1

Cone 2 x 2 x 2 [Completely Open Stud]

2

Cone 1 x 1 [No Top Groove]

*6

Brick Round 1 x 1 Solid Stud

1

Brick Round 2 x 2 with Axle Hole

16

Brick Round 2 x 2 with Axle Hole

*2

Cone 2 x 2 x 2 [Solid Stud]

*9

Brick Round 1 x 1 Solid Stud

20953pr0001/151

Brick Round 2 x 2 Sphere with Stud / Robot Body with BB-8 Droid Print

2

Cone 2 x 2 x 2 [Completely Open Stud]

20952pr0001/151

MINI HAT NO. 8 DECO NO.1

2

Brick Round 1 x 1 Open Stud

*2

Brick Round 1 x 1 Solid Stud

3

Brick Round 2 x 2 with Axle Hole

1

Cone Half 8 x 4 x 6 with Millennium Falcon Cockpit Print [Version 2]

1

Brick Round 2 x 2 with Axle Hole

2

Brick, Round 2 x 2 [Grill]

2

Brick Round 2 x 2 with Axle Hole

2

Brick Round 4 x 4 with 4 Side Pin Holes and Center Axle Hole

2

Brick Round 2 x 2 Dome Top - Hollow Stud with Bottom Axle Holder x Shape + Orientation

8

Cone 1 x 1 [Top Groove]

1

Cone Half 8 x 4 x 6

2

Brick Round 1 x 1 Open Stud

8

Brick Round 4 x 4 with 4 Side Pin Holes and Center Axle Hole

2

Brick Round 2 x 2 with Axle Hole

2

Brick Round 1 x 1 Open Stud

Bricks Sloped - Show owned parts

10

Slope 30 1 x 1 x 2/3 (Cheese Slope)

2

Slope 33 3 x 2

*10

Slope 45 2 x 1 - without Bottom Tube

20

Slope 45 2 x 1 with Bottom Pin

1

Slope 45 2 x 2 Double

2

Slope 45 2 x 2 Double Convex

4

Slope 45 2 x 4 Double with Blue and White Headlight Print

3

Slope 45 2 x 2

2

Slope 45 2 x 3

4

Slope 65 2 x 1 x 2

*4

Slope Inverted 33 3 x 2 [Connections between Studs]

16

Slope Inverted 33 3 x 1

4

Slope Inverted 45 2 x 2 Double Convex

10

Slope Inverted 45 2 x 2 [Ovoid Bottom Pin, Bar-sized Stud Holes]

18

Slope Inverted 45 2 x 1

7

Slope 45 2 x 1 with Bottom Pin

1

Slope 45 2 x 2 with Computer Panel Print

1

Slope 45 2 x 2 with Computer Screen Print

1

Slope 45 2 x 4

1

Slope Inverted 45 2 x 2 [Ovoid Bottom Pin, Bar-sized Stud Holes]

3

Slope Inverted 45 2 x 1

10

Slope 30 1 x 1 x 2/3 (Cheese Slope)

2

Slope 33 3 x 2

*5

Slope 45 2 x 1 - without Bottom Tube

4

Slope 45 2 x 1 with Bottom Pin

4

Slope 45 2 x 2

19

Slope Inverted 45 2 x 2 [Ovoid Bottom Pin, Bar-sized Stud Holes]

1

Slope 33 3 x 2

2

Slope 33 3 x 4

*16

Slope 45 2 x 1 Triple with Ovoid Bottom Pin

16

Slope 45 2 x 1 with Bottom Pin

*4

Slope 45 2 x 2 Double

6

Slope Inverted 45 2 x 2 [Ovoid Bottom Pin, Bar-sized Stud Holes]

12

Slope Inverted 45 2 x 1

10

Slope 30 1 x 1 x 2/3 (Cheese Slope)

*12

Slope 45 2 x 1 - without Bottom Tube

10

Slope 45 2 x 1 with Bottom Pin

3

Slope 45 2 x 2

4

Slope Inverted 33 3 x 1

6

Slope Inverted 45 2 x 2 [Ovoid Bottom Pin, Bar-sized Stud Holes]

8

Slope Inverted 45 2 x 1

6

Slope 33 3 x 4

*2

Slope 45 2 x 1 - without Bottom Tube

4

Slope 45 2 x 2

2

Slope 45 2 x 4

4

Slope Inverted 33 3 x 1

2

Slope Inverted 45 2 x 2 [Ovoid Bottom Pin, Bar-sized Stud Holes]

2

Slope Inverted 45 2 x 1

4

Slope 30 1 x 2 x 2/3

6

Slope Inverted 33 3 x 2 [No Connections between Studs]

10

Slope 30 1 x 1 x 2/3 (Cheese Slope)

4

Slope 65 2 x 2 x 2 with Bottom Tube

10

Slope 30 1 x 1 x 2/3 (Cheese Slope)

10

Slope 30 1 x 1 x 2/3 (Cheese Slope)

20

Slope 30 1 x 1 x 2/3 (Cheese Slope)

23

Slope 30 1 x 1 x 2/3 (Cheese Slope)

7

Slope 30 1 x 2 x 2/3

4

Slope 45 2 x 1 with Bottom Pin

2

Slope 45 2 x 8

7

Slope 65 2 x 2 x 2 with Bottom Tube

4

Slope 75 2 x 1 x 3 with Hollow Stud

2

Slope Inverted 33 3 x 2 [No Connections between Studs]

24

Slope Inverted 45 2 x 1

4

Slope 18 2 x 1 x 2/3 with 4 Slots

2

Slope 18 4 x 1

2

Slope 30 1 x 2 x 2/3

4

Slope 45 2 x 1 with Bottom Pin

6

Slope 65 2 x 2 x 2 with Bottom Tube

6

Slope Inverted 33 3 x 1

13

Slope 30 1 x 1 x 2/3 (Cheese Slope)

Bricks Special - Show owned parts

16

Brick Special 1 x 1 with Headlight and No Slot

34

Brick Special 1 x 2 with Studs on 2 Sides

4

Brick Special 1 x 4 with 4 Studs on One Side

*4

Brick Special 2 x 2 with Pin and No Axle Hole

2

Brick Special 2 x 4 x 2 with Studs on Sides

3

Brick Special 1 x 2 with Studs on 1 Side

*4

Brick Special 1 x 1 x 2 with Shutter Holder

6

Brick Special 1 x 2 Palisade [aka Log]

4

Brick Special 1 x 1 with Headlight and No Slot

4

Brick Special 2 x 2 with 2 Pins and Axle Hole

2

Brick Special - Spring Shooter 1 x 4 with Light Bluish Gray Top

2

Brick Special 1 x 1 with Stud on 1 Side

6

Brick Special 1 x 2 with Grill

2

Brick Special 1 x 2 with Handle

2

Brick Special 1 x 4 with 4 Studs on One Side

3

Brick Special 2 x 2 with Grooves and Axle Hole

14

Brick Special 2 x 4 with Pins

Bricks Wedged - Show owned parts

8

Facet 2 x 2

12

Facet 3 x 3

1

Wedge 4 x 2 Left

1

Wedge 4 x 2 Right

Containers - Show owned parts

1

Box 2 x 2 x 2 Door with Slot

1

Box 2 x 2 x 2 [Hollow Studs]

1

Container Box 2 x 2 x 2 - Top Opening

Flags, Signs, Plastics and Cloth - Show owned parts

2

Flag 2 x 2 Trapezoid

Hinges, Arms and Turntables - Show owned parts

1

Hinge Brick 1 x 2 Top Plate Thin

*2

Hinge Plate 1 x 2 with 2 Fingers and Hollow Studs

2

Hinge Plate 1 x 2 with 3 Fingers and Hollow Studs

106

Hinge Plate 1 x 4 Swivel Top / Base [Complete Assembly]

*8

Hinge Plate 1 x 6 with 2 and 3 Fingers On Ends

*2

Hinge Tile 1 x 4

11

Turntable 2 x 2 Plate, Base

2

Turntable 4 x 4 Square Base with Top, Complete Assembly

1

Turntable 4 x 4 Square Base, Locking

6

Turntable 2 x 2 Plate, Base

1

Hinge Brick 2 x 2 Top Plate Thin

u1125/46

Hinge Plate 1 x 2 with 1 Large Finger

u1126/46

Hinge Plate 1 x 2 with 2 Fingers at Outer Edges

*2

Hinge Tile 1 x 4

6

Turntable 2 x 2 Plate, Base

*1

Hinge Plate 2 x 5 [Complete Assembly]

*2

Hinge Tile 1 x 4

*26

Turntable 2 x 2 Plate - Top

4

Hinge Plate 1 x 4 Swivel Top / Base [Complete Assembly]

*4

Hinge Plate 2 x 5 [Complete Assembly]

6

Turntable 2 x 2 Plate, Base

1

Hinge Brick 1 x 2 Base

*8

Hinge Plate 1 x 2 with 2 Fingers and Hollow Studs

*8

Hinge Plate 1 x 2 with 3 Fingers and Hollow Studs

*2

Hinge Tile 1 x 4

3

Turntable 2 x 2 Plate - Top

1

Hinge Panel 6 x 3

14

Plate Special 4 x 6 with Trap Door Hinge [Long Pins]

Magnets and Holders - Show owned parts

2

Magnet Cylindrical

2

Magnet Holder 2 x 3

Minifig Accessories - Show owned parts

1

MINI SHOOTER CB W. 3.2 SHAFT

1

Minifig Spanner / Screwdriver

1

Minifig Star Wars Blaster Short

1

Minifig Star Wars Blaster Small

1

Minifig Swimming Cap

1

SHIELD NO.7

1

Shield Round Bowed with Mercedes-Benz Logo

69c01/14

Tap 1 x 2 Base with Light Gray Spout

1

Minifig Flintlock Pistol

1

Minifig Pirate Flintlock / Musket

2

Minifig Signal Paddle

2

Tap 1 x 1 without Hole in Spout

1

Minifig Gun Trigger

1

Minifig Star Wars Blaster Small

Minifigs - Show owned parts

1

Legs and Hips [Complete Assembly]

1

MINI LOWER PART NO. 960

1

MINI LOWER PART NO. 961

1

Hair Male with Coiled Texture

1

Minifig Hair Pulled Back

1

MINI LOWER PART NO. 932

1

MINI HEAD NO 1807

1

MINI UPPER PART NO 3145

1

Minifig Hair Short, Tousled with Side Part

1

MINI UPPER PART NO 3177

1

MINI HEAD NO 1778

1

MINI HEAD NO 1808

1

MINI HEAD NO 1809

1

MINI HEAD NO 1810

1

MINI UPPER PART NO 3174

1

Legs and Hips with Dark Tan Fur Print

1

MINI LOWER PART NO. 962

1

MINI UPPER PART NO 3175

1

MINI UPPER PART NO 3176

1

Minifig Hair Female Ponytail with Tied Sections

1

Minifig Head Modified Wookiee, Chewbacca with Dark Tan Face Fur and Teeth Print

1

Torso Plain / Dark Brown Arms / Dark Brown Hands

Non-LEGO - Show owned parts

14262/99991

Sticker for Set 42009

8043stk01/99991

Sticker for Set 8043 - (88671 / 4569212)

8110stk01/99991

Sticker for Set 8110 - Sheet 1 (95746/4622303)

8110stk02/99991

Sticker for Set 8110 - Sheet 2 (96988/4631649)

854stk01/99991

Sticker for Set 854 - (4382)

8880stk01/99992

Sticker for Set 8880 - (168315)

16153/99991

Sticker Sheet #1 for 42025-1

16863/99991

Sticker Sheet #2 for 42025-1

Panels - Show owned parts

3

Panel 1 x 2 x 1 [Square Corners]

2

Panel 1 x 2 x 1 [Square Corners]

2

Panel 1 x 4 x 1 with Rounded Corners [Thin Wall]

1

Panel 1 x 6 x 5

Plants and Animals - Show owned parts

*4

Plant Tree Palm Trunk - Short Connector, no Axle Hole

4

Horse Hitching [Studded]

Plates - Show owned parts

17

Plate 1 x 1

41

Plate 1 x 10

5

Plate 1 x 12

161

Plate 1 x 2

84

Plate 1 x 3

79

Plate 1 x 4

100

Plate 1 x 6

66

Plate 1 x 8

40

Plate 2 x 2 Corner

9

Plate 2 x 10

2

Plate 2 x 12

7

Plate 2 x 16

52

Plate 2 x 2

64

Plate 2 x 3

15

Plate 2 x 4

8

Plate 2 x 6

10

Plate 2 x 8

7

Plate 4 x 4

3

Plate 4 x 6

2

Plate 6 x 10

7

Plate 6 x 8

12

Plate 1 x 1

47

Plate 1 x 2

6

Plate 1 x 3

31

Plate 1 x 4

27

Plate 1 x 6

12

Plate 1 x 8

7

Plate 2 x 10

6

Plate 2 x 2

5

Plate 2 x 3

16

Plate 2 x 4

5

Plate 2 x 6

4

Plate 2 x 8

1

Plate 4 x 10

1

Plate 4 x 12

3

Plate 4 x 8

1

Plate 6 x 8

4

Plate 1 x 1

24

Plate 1 x 2

12

Plate 1 x 3

44

Plate 1 x 4

20

Plate 1 x 6

33

Plate 1 x 8

2

Plate 2 x 10

21

Plate 2 x 2

18

Plate 2 x 3

17

Plate 2 x 4

9

Plate 2 x 6

6

Plate 2 x 8

*4

Plate 4 x 10

1

Plate 4 x 12

6

Plate 4 x 4

9

Plate 4 x 6

5

Plate 4 x 8

1

Plate 6 x 12

*1

Plate 6 x 14

3

Plate 6 x 16

2

Plate 6 x 6

14

Plate 1 x 1

*12

Plate 1 x 10

55

Plate 1 x 2

30

Plate 1 x 3

25

Plate 1 x 4

22

Plate 1 x 6

18

Plate 1 x 8

35

Plate 2 x 2 Corner

58

Plate 2 x 2

4

Plate 2 x 3

1

Plate 2 x 4

2

Plate 4 x 10

1

Plate 4 x 4

4

Plate 4 x 6

4

Plate 2 x 2 Corner

6

Plate 1 x 1

8

Plate 1 x 10

74

Plate 1 x 2

7

Plate 1 x 3

45

Plate 1 x 4

39

Plate 1 x 6

32

Plate 1 x 8

13

Plate 2 x 2

34

Plate 2 x 3

26

Plate 2 x 4

4

Plate 2 x 6

8

Plate 2 x 8

8

Plate 4 x 10

6

Plate 4 x 12

2

Plate 4 x 4

9

Plate 4 x 6

1

Plate 4 x 8

4

Plate 6 x 10

*1

Plate 6 x 16

1

Plate 6 x 8

4

Plate 1 x 10

12

Plate 1 x 2

12

Plate 1 x 3

16

Plate 1 x 4

4

Plate 1 x 6

6

Plate 1 x 8

4

Plate 2 x 2

9

Plate 2 x 6

4

Plate 4 x 4

4

Plate 4 x 6

3

Plate 1 x 2

5

Plate 1 x 6

2

Plate 2 x 10

23

Plate 2 x 2

2

Plate 1 x 2

6

Plate 1 x 4

14

Plate 1 x 2

6

Plate 1 x 4

2

Plate 2 x 3

2

Plate 2 x 4

4

Plate 2 x 6

4

Plate 1 x 2

24

Plate 1 x 1

2

Plate 1 x 2

6

Plate 1 x 1

12

Plate 1 x 1

22

Plate 1 x 2

11

Plate 1 x 1

3

Plate 1 x 12

8

Plate 1 x 2

12

Plate 1 x 3

5

Plate 2 x 2 Corner

3

Plate 2 x 10

1

Plate 2 x 12

3

Plate 2 x 3

2

Plate 2 x 4

5

Plate 2 x 6

1

Plate 6 x 10

5

Plate 6 x 16

4

Plate 6 x 6

2

Plate 8 x 16

1

Plate 8 x 8

21

Plate 1 x 2

4

Plate 1 x 4

8

Plate 1 x 6

2

Plate 1 x 8

6

Plate 2 x 2

44

Plate 2 x 3

19

Plate 2 x 4

13

Plate 2 x 6

1

Plate 2 x 8

2

Plate 3 x 3

5

Plate 4 x 4

2

Plate 4 x 6

1

Plate 4 x 8

4

Plate 6 x 6

14

Plate 1 x 2

2

Plate 1 x 4

4

Plate 1 x 3

1

Plate 2 x 2

Plates Angled - Show owned parts

4

Wedge Plate 3 x 3 Cut Corner

2

Wedge Plate 8 x 3 Left

2

Wedge Plate 8 x 3 Right

*10

Wedge Plate 8 x 4 Wing Left

*10

Wedge Plate 8 x 4 Wing Right

2

Wedge Plate 3 x 6 Cut Corners

*1

Wedge Plate 4 x 4 Wing Right

2

Wedge Plate 3 x 6 Cut Corners

1

Wedge Plate 2 x 4

3

Wedge Plate 3 x 2 Left

3

Wedge Plate 3 x 2 Right

6

Wedge Plate 3 x 3 Cut Corner

3

Wedge Plate 3 x 4 with Stud Notches

1

Wedge Plate 3 x 6 Cut Corners

2

Wedge Plate 4 x 9 with Stud Notches

4

Wedge Plate 6 x 3 Left

4

Wedge Plate 6 x 3 Right

1

Wedge Plate 6 x 6 Cut Corner

1

Wedge Plate 6 x 12 Left

1

Wedge Plate 6 x 12 Right

3

Wedge Plate 8 x 8 Cut Corner

8

Wedge Plate 12 x 3 Left

8

Wedge Plate 12 x 3 Right

5

Wedge Plate 2 x 4

1

Wedge Plate 6 x 3 Left

1

Wedge Plate 6 x 3 Right

4

Wedge Plate 12 x 3 Left

4

Wedge Plate 12 x 3 Right

Plates Round and Dishes - Show owned parts

2

Dish 3 x 3 Inverted [Radar]

*4

Plate Round 1 x 1 with Solid Stud

13

Plate Round 2 x 2 with Axle Hole Type 1 (+ Opening)

38

Plate Round 2 x 2 with Rounded Bottom [Boat Stud]

*3

Plate, Round 2 x 2 with Axle Hole Type 2 (X Opening)

*8

Plate Round 1 x 1 with Solid Stud

4

Plate Round 2 x 2 with Axle Hole Type 1 (+ Opening)

4

Plate Round 2 x 2 with Rounded Bottom [Boat Stud]

*2

Plate Round 2 x 2 with Axle Hole Type 1 (+ Opening)

7

Plate Round 2 x 2 with Axle Hole Type 1 (+ Opening)

1

Plate Round 2 x 2 with Rounded Bottom [Boat Stud]

2

Dish 3 x 3 Inverted [Radar]

2

Plate Round 2 x 2 with Axle Hole Type 1 (+ Opening)

*9

Plate Round 1 x 1 with Solid Stud

8

Plate Round 2 x 2 with Axle Hole Type 1 (+ Opening)

4

Plate Round 2 x 2 with Rounded Bottom [Boat Stud]

*25

Plate Round 1 x 1 with Solid Stud

*2

Plate Round 1 x 1 with Solid Stud

2

Plate Round 2 x 2 with Rounded Bottom [Boat Stud]

6

Dish 2 x 2 Inverted [Radar]

4

Dish 3 x 3 Inverted [Radar]

1

Dish 4 x 4 Inverted [Radar] with Millennium Falcon Cockpit Print [7965]

*33

Plate Round 1 x 1 with Solid Stud

6

Plate Round 2 x 2 with Rounded Bottom [Boat Stud]

1

Dish 2 x 2 Inverted [Radar]

7

Dish 4 x 4 Inverted [Radar]

2

Dish 6 x 6 Inverted (Radar) [Hollow Studs]

*9

Plate Round 1 x 1 with Solid Stud

3

Plate Round 2 x 2 with Axle Hole Type 1 (+ Opening)

4

Plate Round 4 x 4 with 2 x 2 Hole

4

Plate, Round 6 x 6 with Hole

2

Dish 3 x 3 Inverted [Radar]

7

Dish 6 x 6 Inverted [Radar / Webbed / anti-studs at 90]

*17

Plate Round 1 x 1 with Solid Stud

1

Plate Round 4 x 4 with Pin Hole

4

Plate Round Corner 4 x 4

4

Plate, Round Corner 3 x 3

*18

Plate Round 1 x 1 with Solid Stud

2

Plate Round 2 x 2 with Rounded Bottom [Boat Stud]

Plates Special - Show owned parts

15

Bracket 1 x 2 - 2 x 2

4

Bracket 2 x 2 - 2 x 2

7

Plate 2 x 4 [3 Holes]

26

Plate 2 x 8 [7 Holes]

2

Plate Special 1 x 2 with 1 Stud with Groove and Inside Stud Holder (Jumper)

*5

Plate Special 1 x 2 with 1 Stud without Groove (Jumper)

2

Plate Special 1 x 2 with Clip Horizontal on End

2

Plate Special 1 x 2 with Door Rail

2

Plate Special 1 x 2 [Top Clip]

8

Plate Special 2 x 2 with 1 Pin Hole [Split Underside Ribs]

10

Plate Special 2 x 2 with 2 Pin Holes

4

Plate Special 2 x 2 with 1 Pin Hole [Complete Underside Rib]

4

Plate 2 x 4 [3 Holes]

1

Plate 2 x 8 [7 Holes]

14

Plate 2 x 4 [3 Holes]

7

Plate 2 x 8 [7 Holes]

5

Plate Special 1 x 2 with Arm Up [Horizontal Arm 5mm]

4

Plate Special 2 x 2 with 1 Pin Hole [Split Underside Ribs]

7

Plate 2 x 4 [3 Holes]

4

Plate 2 x 8 [7 Holes]

1

Plate 2 x 4 [3 Holes]

3

Plate 2 x 8 [7 Holes]

2

Plate Special 1 x 2 with Arm Up [Horizontal Arm 5mm]

4

Plate Special 1 x 2 with Ladder

2

Plate Special 1 x 1 with Clip Horizontal [Thick Open O Clip]

4

Plate Special 1 x 2 [Top Clip]

1

Plate Special 1 x 4 with 2 Studs

1

Plate Special 2 x 6 x 2/3 [Four Studs on Side]

2

Plate Special 1 x 2 with 1 Stud with Groove and Inside Stud Holder (Jumper)

1

Bracket 1 x 2 - 2 x 2 Inverted

2

Bracket 1 x 2 - 2 x 2

2

Bracket 1 x 2 - 2 x 4

1

Plate Special 1 x 2 5.9mm End Cup

5

Plate Special 1 x 2 with 1 Stud with Groove (Jumper)

*2

Plate Special 1 x 2 with 1 Stud without Groove (Jumper)

58

Plate Special 1 x 2 with Clip Horizontal on End

2

Plate Special 1 x 2 with Pin Hole

3

Plate Special 1 x 2 [Side Handle Closed Ends]

7

Plate Special 1 x 2 [Top Clip]

4

Plate Special 1 x 8 with Door Rail

5

Plate Special 2 x 2 with 1 Pin Hole [Split Underside Ribs]

3

Bracket 1 x 2 - 1 x 2 Inverted

3

Plate 2 x 4 [3 Holes]

2

Plate Special 1 x 1 with Clip Horizontal [Thick Open O Clip]

2

Plate Special 1 x 1 with Clip Vertical [Thick Open O Clip]

4

Plate Special 1 x 2 Side Handle [Free Ends]

*9

Plate Special 1 x 2 with 1 Stud without Groove (Jumper)

6

Plate Special 1 x 2 with Arm Up [Horizontal Arm 5mm]

2

Plate Special 1 x 2 with Door Rail

40

Plate Special 1 x 2 with Handle on End [Closed Ends]

2

Plate Special 1 x 2 with Handles [Flat Ends / Low Attachment]

4

Plate Special 1 x 2 with Ladder

2

Plate Special 1 x 4 Offset

1

Plate Special 2 x 2 with Groove and Center Stud (Jumper)

4

Plate Special 2 x 4 with Pins

2

Plate Special 2 x 2 with Bar Frame Octagonal, Reinforced, Completely Round Studs

Pneumatics - Show owned parts

2

Pneumatic Hose Connector with Axle Connector

1

Pneumatic Pump 1 x 6 with Stepped Outlet [V2]

*1

Pneumatic Pump Old Style

*1

Pneumatic Distribution Block 2 x 4 (Complete)

75215/73

Pneumatic Switch with Top Studs

4697a/75

Pneumatic T-Piece (T Bar) [Old Style]

1

Pneumatic Cylinder 1 x 5 with 2 Inlets

1

Pneumatic Cylinder 1 x 5 with 2 Stepped Inlets [V2]

1

Pneumatic Cylinder 1 x 11 with 2 Stepped Inlets [V2]

2

Pneumatic Cylinder 2 x 11 with 2 Stepped Inlets [V2]

4688c01/143

Pneumatic Cylinder with 1 Inlet Medium (48mm)

2

Pneumatic Cylinder with 2 Inlets and Rounded End Medium (48mm)

1

Pneumatic Pump 1 x 6

6

Pneumatic T-Piece (T Bar) [New Style]

13

Pneumatic Hose Connector with Axle Connector

4

Pneumatic Switch with Pin Holes

4

Pneumatic Switch with Pin Holes and Stepped Outlets [V2]

Power Functions, Mindstorms and Electric - Show owned parts

4

Electric Power Functions LED Light Unit with Black PF Connector Lead

6

Electric Power Functions Battery Box 4 x 11 x 7 with Orange Switch and Dark Bluish Gray Covers

1

Electric Power Functions Battery Box 4 x 11 x 7 with Orange Switch and Dark Bluish Gray Covers [New Version]

4

Electric Power Functions IR Receiver

1

Electric Power Functions IR Receiver with V2 Print

5

Electric Power Functions IR Remote Control with Dark Bluish Gray Bottom

1

Electric Power Functions IR Speed Remote Control with Dark Bluish Gray Bottom

5

Electric Power Functions Large Motor with Dark Bluish Gray Bottom

8

Electric Power Functions Medium Motor 3 x 6 x 3 with Dark Bluish Gray Bottom and 20cm Wire

2

Electric Power Functions Pole Reverser / Polarity Switch with Black Lead

3

Electric Power Functions Servo Motor with Dark Bluish Gray Bottom

2

Electric Power Functions XL Motor 6 x 6 x 6 with Dark Bluish Gray Bottom and 20cm Wire

6

Electric Power Functions Extension Wire with One Light Bluish Gray End [20cm]

String, Bands and Reels - Show owned parts

rb00167/02

Rubber Band 15mm [Square Cross Section]

rb00170/01

Rubber Band Medium (Square Cross Section)

rb00168/02

Rubber Band Medium (Square Cross Section) Thin Cut

8

Rubber Band Small 13mm (Square Cross Section)

1

String Cord Medium Thickness 250cm

1

String Cord Thin 50cm

56823/01

String Cord Thin [Undetermined Length]

2

String with End Studs 11L Overall

5

String with End Studs 31L Overall

2

String with End Studs 41L Overall

3

Minifig Chain 16L

1

Reel 3 x 2

Supports, Girders and Cranes - Show owned parts

2

Support 1 x 1 x 5 1/3 Spiral Staircase Axle

1

Hook with Towball

1

Support 2 x 2 x 2 Stand with Reach-Through Center Hole

Technic Axles - Show owned parts

66

Axle 2

58

Axle 2 Notched

48

Axle 3

299

Axle 4

3

Axle 5

220

Axle 6

82

Axle 8

55

Axle 10

1

Axle 10 Threaded

48

Axle 12

5

Axle 16

2

Axle 32

460

Axle 2 Notched

*4

Axle Nut

5

Axle 3 with Stud

2

Axle 16

26

Axle 4 with Centre Stop

52

Axle 3 with Stud

24

Axle 5 with Stop

497

Axle 3

223

Axle 5

104

Axle 7

52

Axle 9

18

Axle 3 with Stud

156

Axle 4 with Stop

6

Axle 5.5 With Stop [Flat Short End]

49

Axle 5.5 With Stop [Rounded Short End]

32

Axle 8 with Stop

Technic Beams - Show owned parts

20

Beam 1 x 2 Thick

57

Beam 1 x 2 Thick with Pin Hole and Axle Hole

59

Beam 1 x 3 Thick

78

Beam 1 x 5 Thick

14

Beam 1 x 7 Bent (4 - 4) Thick

69

Beam 1 x 7 Thick

28

Beam 1 x 9 Bent (6 - 4) Thick

8

Beam 1 x 9 Bent (7 - 3) Thick

94

Beam 1 x 9 Thick

53

Beam 1 x 11 Thick

23

Beam 1 x 11.5 Double Bent Thick

55

Beam 1 x 13 Thick

75

Beam 1 x 15 Thick

99

Beam 2 x 4 L-Shape Thick

45

Beam 3 x 3 T-Shape Thick

55

Beam 3 x 5 L-Shape Thick

58

Beam 1 x 2 Thin

97

Beam 1 x 3 Thin

57

Beam 1 x 4 Thin

31

Beam 1 x 4 Thin with Stud Connector

24

Beam 1 x 5 Thin

38

Beam 1 x 5 Thin with Axle Holes on Ends

8

Beam 1 x 6 Thin

11

Beam 1 x 7 Thin

51

Beam 3 x 3 L-Shape Thin

2

Beam 3 x 3 L-Shape with Quarter Ellipse Thin

31

Beam 3 x 5 L-Shape with Quarter Ellipse Thin

4

Beam 5 x 7 L-Shape with Quarter Ellipse Thin

28

Beam Triangle Thin [Type II]

6

Beam Triangle Thin [Type I]

12

Beam 1 x 2 Thick

10

Beam 1 x 3 Thick

10

Beam 1 x 5 Thick

4

Beam 1 x 7 Bent (4 - 4) Thick

4

Beam 1 x 7 Thick

5

Beam 1 x 9 Bent (6 - 4) Thick

2

Beam 1 x 9 Thick

1

Beam 1 x 11 Thick

4

Beam 1 x 15 Thick

1

Beam 2 x 4 L-Shape Thick

19

Beam 3 x 5 L-Shape Thick

23

Beam 1 x 2 Thin

6

Beam 1 x 3 Thin

16

Beam Triangle Thin [Type I]

2

Beam 1 x 9 Thick

2

Beam 1 x 13 Thick

13

Beam 1 x 2 Thick

17

Beam 1 x 3 Thick

26

Beam 1 x 5 Thick

8

Beam 1 x 7 Bent (4 - 4) Thick

38

Beam 1 x 7 Thick

8

Beam 1 x 9 Bent (6 - 4) Thick

18

Beam 1 x 9 Bent (7 - 3) Thick

22

Beam 1 x 9 Thick

16

Beam 1 x 11 Thick

10

Beam 1 x 11.5 Double Bent Thick

13

Beam 1 x 13 Thick

19

Beam 1 x 15 Thick

50

Beam 2 x 4 L-Shape Thick

30

Beam 3 x 5 L-Shape Thick

50

Beam 1 x 2 Thin

29

Beam 1 x 3 Thin

8

Beam 1 x 4 Thin

14

Beam 1 x 4 Thin with Stud Connector

16

Beam 3 x 3 L-Shape Thin

2

Beam 3 x 3 L-Shape with Quarter Ellipse Thin

2

Beam 3 x 5 L-Shape with Quarter Ellipse Thin

4

Beam Triangle Thin [Type I]

22

Beam 1 x 4 Thin with Stud Connector

1

Beam 1 x 5 Thin

2

Beam 1 x 3 Thin

3

Beam 1 x 5 Thin

6

Beam 1 x 5 Thick

6

Beam 1 x 7 Thick

4

Beam 1 x 11 Thick

27

Beam 1 x 2 Thick

55

Beam 1 x 3 Thick

49

Beam 1 x 5 Thick

2

Beam 1 x 7 Bent (4 - 4) Thick

49

Beam 1 x 7 Thick

14

Beam 1 x 9 Bent (6 - 4) Thick

2

Beam 1 x 9 Bent (7 - 3) Thick

34

Beam 1 x 9 Thick

39

Beam 1 x 11 Thick

17

Beam 1 x 11.5 Double Bent Thick

20

Beam 1 x 13 Thick

38

Beam 1 x 15 Thick

34

Beam 2 x 4 L-Shape Thick

1

Beam 3 x 3 T-Shape Thick

53

Beam 3 x 5 L-Shape Thick

34

Beam 1 x 3 Thin

36

Beam 1 x 4 Thin

2

Beam 1 x 4 Thin with Stud Connector

39

Beam 1 x 5 Thin

10

Beam 1 x 6 Thin

2

Beam 1 x 7 Thin

18

Beam 3 x 3 L-Shape Thin

10

Beam 3 x 5 L-Shape with Quarter Ellipse Thin

34

Beam Triangle Thin [Type II]

3

Beam Triangle Thin [Type I]

38

Beam 1 x 3 Thick

29

Beam 1 x 5 Thick

4

Beam 1 x 7 Bent (4 - 4) Thick

42

Beam 1 x 7 Thick

2

Beam 1 x 9 Bent (6 - 4) Thick

6

Beam 1 x 9 Bent (7 - 3) Thick

25

Beam 1 x 9 Thick

26

Beam 1 x 11 Thick

8

Beam 1 x 11.5 Double Bent Thick

11

Beam 1 x 13 Thick

15

Beam 1 x 15 Thick

25

Beam 2 x 4 L-Shape Thick

10

Beam 3 x 5 L-Shape Thick

12

Beam 1 x 2 Thin

12

Beam 1 x 3 Thin

12

Beam 1 x 4 Thin

12

Beam 1 x 6 Thin

4

Beam 1 x 9 Bent (7 - 3) Thick

4

Beam 1 x 11.5 Double Bent Thick

7

Beam 2 x 4 L-Shape Thick

25

Beam 1 x 3 Thin

4

Beam 1 x 4 Thin with Stud Connector

2

Beam 1 x 7 Thin

6

Beam 3 x 3 L-Shape Thin

*2

Beam 3 x 3 L-Shape with Quarter Ellipse Thin

*2

Beam Triangle Thin [Type I]

8

Beam 1 x 2 Thick with Pin Hole and Axle Hole

4

Beam 1 x 7 Bent (4 - 4) Thick

6

Beam 1 x 11.5 Double Bent Thick

5

Beam 1 x 13 Thick

7

Beam 1 x 15 Thick

2

Beam 2 x 4 L-Shape Thick

10

Beam 3 x 5 L-Shape Thick

5

Beam 1 x 3 Thick

9

Beam 1 x 5 Thick

6

Beam 1 x 7 Bent (4 - 4) Thick

12

Beam 1 x 7 Thick

12

Beam 1 x 9 Bent (7 - 3) Thick

3

Beam 1 x 11 Thick

6

Beam 1 x 11.5 Double Bent Thick

16

Beam 1 x 15 Thick

5

Beam 2 x 4 L-Shape Thick

4

Beam 3 x 5 L-Shape Thick

10

Beam 1 x 3 Thin

4

Beam 1 x 5 Thin

10

Beam 3 x 3 L-Shape Thin

8

Beam 1 x 2 Thick

119

Beam 1 x 2 Thick with Pin Hole and Axle Hole

48

Beam 1 x 3 Thick

59

Beam 1 x 5 Thick

5

Beam 1 x 7 Bent (4 - 4) Thick

40

Beam 1 x 7 Thick

14

Beam 1 x 9 Bent (6 - 4) Thick

2

Beam 1 x 9 Bent (7 - 3) Thick

6

Beam 1 x 9 Thick

19

Beam 1 x 11 Thick

6

Beam 1 x 11.5 Double Bent Thick

43

Beam 1 x 13 Thick

32

Beam 1 x 15 Thick

92

Beam 2 x 4 L-Shape Thick

23

Beam 3 x 3 T-Shape Thick

29

Beam 3 x 5 L-Shape Thick

63

Beam 1 x 2 Thin

23

Beam 1 x 3 Thin

1

Beam 1 x 4 Thin

24

Beam 1 x 4 Thin with Stud Connector

20

Beam 1 x 5 Thin

6

Beam 1 x 5 Thin with Axle Holes on Ends

6

Beam 1 x 6 Thin

2

Beam 1 x 7 Thin

26

Beam 3 x 3 L-Shape Thin

5

Beam 3 x 5 L-Shape with Quarter Ellipse Thin

8

Beam Triangle Thin [Type II]

21

Beam Triangle Thin [Type I]

57

Beam 1 x 2 Thick with Pin Hole and Axle Hole

2

Beam 1 x 3 Thick

7

Beam 1 x 5 Thick

6

Beam 1 x 7 Bent (4 - 4) Thick

53

Beam 1 x 7 Thick

4

Beam 1 x 9 Bent (6 - 4) Thick

4

Beam 1 x 9 Bent (7 - 3) Thick

17

Beam 1 x 9 Thick

58

Beam 1 x 11 Thick

10

Beam 1 x 11.5 Double Bent Thick

16

Beam 1 x 13 Thick

21

Beam 1 x 15 Thick

2

Beam 2 x 4 L-Shape Thick

11

Beam 3 x 3 T-Shape Thick

37

Beam 3 x 5 L-Shape Thick

10

Beam 1 x 2 Thin

46

Beam 1 x 3 Thin

13

Beam 3 x 3 L-Shape Thin

8

Beam 3 x 3 L-Shape with Quarter Ellipse Thin

8

Beam 3 x 5 L-Shape with Quarter Ellipse Thin

10

Beam Triangle Thin [Type II]

4

Beam Rotor 3 Blade Thin

Technic Beams Special - Show owned parts

4

Beam 1 x 2 with Ball Joint Straight

34

Beam 3 x 0.5 Liftarm with Boss and Pin / Crank

6

Beam 1 x 7 with Fan

2

Beam 3 x 0.5 Liftarm with Boss and Pin / Crank

19

Beam 3 x 0.5 Liftarm with Boss and Pin / Crank

25

Beam 5 x 7 Open Center Thick

12

Beam 5 x 11 Open Center Frame Thick

6

I Beam 3 x 5 Thick [90 Offset Centre Beam Holes]

Technic Bricks - Show owned parts

36

Brick 1 x 1 with Hole

68

Brick 1 x 2 [1 Hole]

29

Brick 1 x 2 [2 Holes]

68

Brick 1 x 4 [3 Holes]

28

Brick 1 x 6 [5 Holes]

64

Brick 1 x 8 [7 Holes]

27

Brick 1 x 10 [9 Holes]

50

Brick 1 x 12 [11 Holes]

2

Brick 1 x 14 [13 Holes]

47

Brick 1 x 16 [15 Holes]

4

Brick 5 x 5 Right Angle (1 x 4 - 1 x 4)

4

Slope Long

2

Brick 1 x 1 with Hole

17

Brick 1 x 2 [1 Hole]

17

Brick 1 x 4 [3 Holes]

2

Brick 1 x 6 [5 Holes]

11

Brick 1 x 8 [7 Holes]

8

Brick 1 x 12 [11 Holes]

12

Brick 1 x 16 [15 Holes]

33

Brick 1 x 2 [1 Hole]

33

Brick 1 x 4 [3 Holes]

5

Brick 1 x 6 [5 Holes]

20

Brick 1 x 8 [7 Holes]

2

Brick 1 x 12 [11 Holes]

19

Brick 1 x 16 [15 Holes]

12

Brick 1 x 1 with Hole

43

Brick 1 x 2 [1 Hole]

14

Brick 1 x 4 [3 Holes]

4

Brick 1 x 6 [5 Holes]

25

Brick 1 x 8 [7 Holes]

12

Brick 1 x 10 [9 Holes]

4

Brick 1 x 12 [11 Holes]

*18

Brick 1 x 16 [15 Holes]

4

Brick 1 x 1 with Hole

2

Brick 1 x 2 with Axle Hole Type 1 [+ Opening] and Bottom Pin

42

Brick 1 x 2 [1 Hole]

3

Brick 1 x 2 [2 Holes]

33

Brick 1 x 4 [3 Holes]

19

Brick 1 x 6 [5 Holes]

19

Brick 1 x 8 [7 Holes]

3

Brick 1 x 12 [11 Holes]

16

Brick 1 x 16 [15 Holes]

5

Brick 1 x 1 with Hole

14

Brick 1 x 2 [1 Hole]

4

Brick 1 x 4 [3 Holes]

2

Brick 1 x 16 [15 Holes]

*8

Slope Short (Wing Front)

2

Brick 1 x 4 [3 Holes]

8

Brick 1 x 2 with Axle Hole Type 1 [+ Opening] and Bottom Pin

8

Brick 1 x 2 [1 Hole]

2

Brick 1 x 2 [2 Holes]

6

Brick 1 x 6 [5 Holes]

10

Brick 1 x 12 [11 Holes]

13

Brick 4 x 6 Open Center

1

Brick 6 x 8 with Open Center 4 x 6

12

Pin Connector Block 1 x 5 x 3

4

Brick 1 x 16 [15 Holes]

Technic Bushes - Show owned parts

48

Bush

280

Bush

*31

Bush 1/2 Smooth with Axle Hole Semi-Reduced

*45

Bush 1/2 Toothed Type I [+ Opening]

*126

Bush 1/2 Toothed Type II [X Opening]

*94

Bush 1/2 Smooth with Axle Hole Semi-Reduced

374

Bush

*185

Bush 1/2 Smooth with Axle Hole Semi-Reduced

Technic Connectors - Show owned parts

93

Axle and Pin Connector Angled #1

54

Axle and Pin Connector Angled #2 - 180

15

Axle and Pin Connector Angled #3 - 157.5

19

Axle and Pin Connector Angled #4 - 135

18

Axle and Pin Connector Angled #5 - 112.5

29

Axle and Pin Connector Angled #6 - 90

185

Axle and Pin Connector Perpendicular

90

Axle and Pin Connector Perpendicular 3L with 2 Pin Holes

76

Axle and Pin Connector Perpendicular 3L with Centre Pin Hole

38

Axle and Pin Connector Perpendicular Double

13

Axle and Pin Connector Perpendicular Double Split

39

Axle and Pin Connector Perpendicular Split

89

Axle and Pin Connector Perpendicular Triple

4

Axle and Pin Connector Toggle Joint Smooth

10

Axle Connector 2 x 3 with Ball Socket, Open Lower Axle Holes

8

Axle Connector Double Flexible [Rubber]

25

Axle Connector Ridged [with x Hole x Orientation]

109

Axle Connector Smooth [with x Hole + Orientation]

38

Axle Connector with Axle Hole

8

Pin Connector Perpendicular 2 x 4 Bent - Beam with 90 Hole 4.8

4

Connector Block 3 x 3 Triangular

1

Pin Connector 3L with 2 Pins and Center Hole

31

Pin Connector Hub with 1 Pin with Friction Ridges Lengthwise

64

Pin Connector Hub with 2 Pins with Friction Ridges Lengthwise

4

Pin Connector Perpendicular 2 x 2 Bent

4

Pin Connector Perpendicular Long

2

Pin Connector Plate 1 x 2 x 1 2/3 [Two Holes On Top]

2

Pin Connector Plate with One Hole (Single on Bottom)

5

Pin Connector Round [No Slot]

30

Pin Connector Round [Slotted]

2

Pin Connector Toggle Joint Smooth Double with 2 Pins

25

Pin Connector Toggle Joint Smooth Double with Axle and Pin Holes

11

Axle 1.5 with Perpendicular Axle Connector ( Pole Reverser Handle)

23

Axle and Pin Connector Angled #1

13

Axle and Pin Connector Angled #2 - 180

4

Axle and Pin Connector Angled #3 - 157.5

2

Axle and Pin Connector Angled #4 - 135

20

Axle and Pin Connector Angled #5 - 112.5

5

Axle and Pin Connector Angled #6 - 90

44

Axle and Pin Connector Perpendicular

23

Axle and Pin Connector Perpendicular 3L with 2 Pin Holes

23

Axle and Pin Connector Perpendicular 3L with Centre Pin Hole

2

Axle and Pin Connector Perpendicular Double

15

Axle and Pin Connector Perpendicular Double Split

14

Axle Connector Ridged [with x Hole x Orientation]

31

Axle Connector Smooth [with x Hole + Orientation]

13

Axle Connector with Axle Hole

2

Pin Connector Round [No Slot]

4

Pin Connector Round [Slotted]

*109

Axle and Pin Connector

10

Axle and Pin Connector Perpendicular

4

Axle and Pin Connector Perpendicular 3L with Pin Hole

*27

Axle and Pin Connector Toggle Joint Toothed [Without Slots]

*36

Axle Connector Ridged [with + Hole + Orientation]

4

Axle Connector Ridged [with x Hole x Orientation]

4

Axle Connector with Axle Hole

*32

Connector Toggle Joint Toothed [With Slots]

32

Axle 1.5 with Perpendicular Axle Connector ( Pole Reverser Handle)

4

Axle and Pin Connector Perpendicular

30

Axle and Pin Connector Perpendicular 3L with 2 Pin Holes

37

Axle and Pin Connector Angled #1

2

Axle and Pin Connector Angled #3 - 157.5

8

Axle and Pin Connector Angled #5 - 112.5

2

Axle and Pin Connector Angled #6 - 90

47

Axle and Pin Connector Perpendicular

32

Axle and Pin Connector Perpendicular 3L with 2 Pin Holes

35

Axle Connector Smooth [with x Hole + Orientation]

4

Axle Connector with Axle Hole

25

Pin Connector Round [Slotted]

30

Axle and Pin Connector Angled #1

14

Axle and Pin Connector Angled #2 - 180

3

Axle and Pin Connector Angled #3 - 157.5

4

Axle and Pin Connector Angled #5 - 112.5

22

Axle and Pin Connector Perpendicular

4

Axle and Pin Connector Perpendicular 3L with Centre Pin Hole

3

Driving Ring Connector

1

Pin Connector Round [No Slot]

13

Pin Connector Round [Slotted]

4

Axle and Pin Connector Angled #1

*1

Axle and Pin Connector Angled #2 - 180

5

Axle and Pin Connector Angled #3 - 157.5

3

Axle and Pin Connector Angled #5 - 112.5

6

Axle and Pin Connector Perpendicular

3

Axle and Pin Connector Perpendicular 3L with Centre Pin Hole

*1

Axle and Pin Connector Perpendicular Double

*2

Axle Connector Block 3 x 6 with 6 Axleholes

15

Axle Connector Ridged [with x Hole x Orientation]

2

Axle Connector with Axle Hole

*2

Block 3 x 6 x 1 & 2/3

*1

Pin Connector Block 3 x 3 x 1

2

Pin Connector Round [No Slot]

4

Axle and Pin Connector Angled #3 - 157.5

6

Pin Connector Round [Slotted]

4

Axle and Pin Connector Angled #1

54

Axle and Pin Connector Angled #2 - 180

8

Axle and Pin Connector Angled #3 - 157.5

8

Axle and Pin Connector Angled #5 - 112.5

6

Axle and Pin Connector Angled #6 - 90

115

Axle and Pin Connector Perpendicular

36

Axle and Pin Connector Perpendicular 3L with 2 Pin Holes

79

Axle and Pin Connector Perpendicular 3L with Centre Pin Hole

2

Axle and Pin Connector Perpendicular 3L with Pin Hole

4

Axle and Pin Connector Perpendicular Double

6

Axle and Pin Connector Perpendicular Double 4L

29

Axle and Pin Connector Perpendicular Double Split

4

Axle and Pin Connector Perpendicular Split

28

Axle and Pin Connector Perpendicular Triple

6

Axle and Pin Connector Toggle Joint Smooth

8

Axle Connector Hub with 3 Axles at 120

25

Axle Connector Ridged [with x Hole x Orientation]

136

Axle Connector Smooth [with x Hole + Orientation]

21

Axle Connector with Axle Hole

25

Pin Connector Hub Perpendicular 3 x 3 Bent with 4 Pins

59

Pin Connector Hub Perpendicular 3L with 4 Pins

88

Pin Connector Hub with 2 Pins with Friction Ridges Lengthwise

15

Pin Connector Perpendicular 2 x 2 Bent

12

Pin Connector Perpendicular Long

10

Pin Connector Round [Slotted]

7

Axle 1.5 with Perpendicular Axle Connector ( Pole Reverser Handle)

18

Axle and Pin Connector Block 4 x 3 x 2 1/2 [Linear Actuator Holder]

8

Axle and Pin Connector Perpendicular

74

Axle and Pin Connector Perpendicular 3L with 2 Pin Holes

3

Axle and Pin Connector Perpendicular Double

42

Axle and Pin Connector Perpendicular Double Split

4

Axle Connector 2 x 3 with Ball Socket, Closed Sides, Squared Ends

14

Axle Connector Smooth [with x Hole + Orientation]

14

Pin Connector Hub with 2 Perpendicular Axles

7

Pin Connector Round 1L [Beam]

15

Axle 1.5 with Perpendicular Axle Connector ( Pole Reverser Handle)

2

Axle and Pin Connector Angled #1

Technic Gears - Show owned parts

2

Gear 8 Tooth

78

Gear 12 Tooth Double Bevel

*4

Gear 16 Tooth with Clutch [Toothed]

7

Gear 20 Tooth Double Bevel with Axle Hole Type 1 [+ Opening]

2

Gear 20 Tooth Double Bevel with Axle Hole Type 2 [X Opening]

2

Gear 36 Tooth Double Bevel

6

Gear Rack 1 x 7 with Axle and Pin Holes

2

Gear Rack 1 x 8 with Holes

20

Gear Rack 1 x 13 with Axle and Pin Holes

7

Gear Rack 1 x 4

15

Knob Wheel

16

Driving Ring 2L

5

Gear 8 Tooth No Friction

11

Gear 16 Tooth with Clutch on Both Sides

3

Gear Rack 1 x 14 x 2 Housing

*8

Ball with Grooves

4

Driving Ring 2L

67

Gear 8 Tooth

1

Gear 12 Tooth Bevel

*45

Gear 14 Tooth Bevel

*40

Gear 16 Tooth with Round Holes [Old Style]

1

Gear 20 Tooth Bevel

1

Gear 20 Tooth Double Bevel with Axle Hole Type 2 [X Opening]

*10

Gear 24 Tooth Crown with Flat Teeth

4

Gear 24 Tooth Crown with Reinforcements [New Style]

*51

Gear 24 Tooth [Old Style - Three axle holes]

9

Gear 40 Tooth

*2

Gear Differential [Old Style, 28 Teeth]

48

Gear Rack 1 x 4

4

Gear 16 Tooth with Clutch [Toothed]

*6

Gear Differential, 24 -16 Teeth

8

Knob Wheel

9

Gear 24 Tooth Clutch with Dark Bluish Gray Center

104

Gear 12 Tooth Bevel

11

Gear 20 Tooth Bevel

15

Gear 20 Tooth Double Bevel with Axle Hole Type 1 [+ Opening]

33

Gear 20 Tooth Double Bevel with Axle Hole Type 2 [X Opening]

*2

Gear 24 Tooth [New Style with Single Axle Hole]

16

Driving Ring Extension

5

Gear 8 Tooth

13

Gear 12 Tooth Bevel

7

Gear 12 Tooth Double Bevel

83

Gear 16 Tooth Reinforced [New Style]

21

Gear 16 Tooth with Round Holes [Old Style]

1

Gear 20 Tooth Bevel

16

Gear 20 Tooth Bevel with Pin Hole

3

Gear 20 Tooth Double Bevel with Axle Hole Type 2 [X Opening]

1

Gear 24 Tooth Crown with Reinforcements [New Style]

3

Gear 24 Tooth [New Style with Single Axle Hole]

11

Gear Rack 1 x 4

14

Worm Gear

10

Differential with Inner Tabs and Closed Center- 28 Bevel Teeth

3

Driving Ring 3L

9

Gear 8 Tooth

31

Gear 8 Tooth [Reinforced]

34

Gear 16 Tooth with Clutch [Smooth]

*16

Gear 16 Tooth with Clutch [Toothed]

19

Gear 24 Tooth [New Style with Single Axle Hole]

3

Gear Differential, 24 -16 Teeth

3

Gear Rack 1 x 14 x 2 with Axle and Pin Holes

Technic Panels - Show owned parts

1

Panel Curved 11 x 3 with 10 Pin Holes through Panel Surface

7

Panel Curved 11 x 3 with 2 Pin Holes through Panel Surface

24116/08

Panel Curved and Bent 6 x 3

4

Panel Fairing # 3 Small Smooth Long, Side A

4

Panel Fairing # 4 Small Smooth Long, Side B

2

Fairing # 5 Small Short, Large Hole, Side A

2

Fairing # 6 Small Short, Large Hole, Side B

3

Panel Fairing #13 Large Short Smooth, Side A

3

Panel Fairing #14 Large Short Smooth, Side B

2

Fairing #17 Large Smooth, Side A

2

Fairing #18 Large Smooth, Side B

7

Panel Fairing #21 Very Small Smooth, Side B

1

Fairing #22 Large Short, Small Hole, Side A

7

Panel Fairing #22 Very Small Smooth, Side A

1

Fairing #23 Large Short, Small Hole, Side B

6

Panel 3 X 11 x 1

5

Panel 1 x 5 x 11

3

Car Spoiler 3 x 8 [Three Holes]

1

Panel Fairing #21 Very Small Smooth, Side B

1

Panel Fairing #22 Very Small Smooth, Side A

3

Panel Fairing #21 Very Small Smooth, Side B

3

Panel Fairing #22 Very Small Smooth, Side A

5

Panel Curved 11 x 3 with 2 Pin Holes through Panel Surface

1

Fairing # 1 Large Short, Large Holes, Side A

1

Fairing # 2 Large Short, Large Holes, Side B

3

Panel Fairing # 3 Large Long, Large Holes, Side A

5

Panel Fairing # 3 Small Smooth Long, Side A

3

Panel Fairing # 4 Large Long, Large Holes, Side B

5

Panel Fairing # 4 Small Smooth Long, Side B

2

Panel Fairing # 5 Long Smooth, Side A

2

Fairing # 5 Small Short, Large Hole, Side A

2

Panel Fairing # 6 Long Smooth, Side B

2

Fairing # 6 Small Short, Large Hole, Side B

5

Fairing # 7 Small Long, Large Hole, Side A

5

Fairing # 8 Small Long, Large Hole, Side B

1

Fairing #17 Large Smooth, Side A

1

Fairing #18 Large Smooth, Side B

5

Fairing #20 Large Long, Small Hole, Side A

5

Fairing #21 Large Long, Small Hole, Side B

3

Panel Fairing #21 Very Small Smooth, Side B

9

Fairing #22 Large Short, Small Hole, Side A

3

Panel Fairing #22 Very Small Smooth, Side A

9

Fairing #23 Large Short, Small Hole, Side B

4

Fairing #24 Small Short, Small Hole, Side B

4

Fairing #25 Small Short, Small Hole, Side A

5

Panel 1 x 5 x 11

8

Panel Curved 3 x 13

5

Panel Fairing # 3 Small Smooth Long, Side A

5

Panel Fairing # 4 Small Smooth Long, Side B

2

Panel Fairing # 5 Long Smooth, Side A

2

Panel Fairing # 6 Long Smooth, Side B

4

Panel 3 X 11 x 1

6

Panel Curved 11 x 3 with 10 Pin Holes through Panel Surface

12

Panel Curved 11 x 3 with 2 Pin Holes through Panel Surface

6

Fairing # 1 Small Smooth Short, Side A

5

Fairing # 2 Small Smooth Short, Side B

8

Panel Fairing # 3 Small Smooth Long, Side A

7

Panel Fairing # 4 Small Smooth Long, Side B

5

Panel Fairing # 5 Long Smooth, Side A

5

Panel Fairing # 6 Long Smooth, Side B

4

Panel 5 x 11 x 1 Tapered

6

Panel 1 x 5 x 11

17

Panel Curved 11 x 3 with 2 Pin Holes through Panel Surface

11

Fairing # 1 Small Smooth Short, Side A

11

Fairing # 2 Small Smooth Short, Side B

7

Panel Fairing # 3 Small Smooth Long, Side A

7

Panel Fairing # 4 Small Smooth Long, Side B

5

Panel Fairing # 5 Long Smooth, Side A

3

Fairing # 5 Small Short, Large Hole, Side A

5

Panel Fairing # 6 Long Smooth, Side B

3

Fairing # 6 Small Short, Large Hole, Side B

2

Panel Fairing #13 Large Short Smooth, Side A

2

Panel Fairing #14 Large Short Smooth, Side B

3

Fairing #17 Large Smooth, Side A

3

Fairing #18 Large Smooth, Side B

3

Panel Fairing #21 Very Small Smooth, Side B

1

Fairing #22 Large Short, Small Hole, Side A

3

Panel Fairing #22 Very Small Smooth, Side A

1

Fairing #23 Large Short, Small Hole, Side B

4

Panel 5 x 11 x 1 Tapered

10

Panel 3 X 11 x 1

5

Panel 1 x 5 x 11

4

Panel Curved 11 x 3 with 2 Pin Holes through Panel Surface

1

Fairing # 1 Small Smooth Short, Side A

1

Fairing # 2 Small Smooth Short, Side B

1

Panel Fairing # 3 Small Smooth Long, Side A

1

Panel Fairing # 4 Small Smooth Long, Side B

1

Fairing #17 Large Smooth, Side A

1

Fairing #18 Large Smooth, Side B

4

Panel Fairing #21 Very Small Smooth, Side B

4

Panel Fairing #22 Very Small Smooth, Side A

1

Panel 1 x 5 x 11

2

Fairing # 5 Small Short, Large Hole, Side A

2

Fairing # 6 Small Short, Large Hole, Side B

1

Fairing #20 Large Long, Small Hole, Side A

1

Fairing #21 Large Long, Small Hole, Side B

3

Fairing #22 Large Short, Small Hole, Side A

3

Fairing #23 Large Short, Small Hole, Side B

1

Panel Car Mudguard Left

1

Panel Car Mudguard Right

7

Panel Curved 11 x 3 with 2 Pin Holes through Panel Surface

26

Panel 1 x 5 x 11

4

Engine Block Half / Side Intake Panel

Technic Pins - Show owned parts

25

Axle Pin 3L with Friction Ridges Lengthwise and 2L Axle

16

Pin Double Triangle 1 x 3 with 2 Clips

33

Pin Double with Axle Hole

170

Pin Long with Friction Ridges Lengthwise

146

Pin Long with Friction Ridges Lengthwise and Stop Bush

2968

Pin with Friction Ridges Lengthwise and Center Slots

95

Pin with Friction Ridges Lengthwise and Towball

Similar41

Pin with Friction Ridges Lengthwise, without Center Slots

862

Axle Pin with Friction Ridges Lengthwise

76

Pin 1/2

1203

Pin Long with Friction Ridges Lengthwise

95

Pin Long with Friction Ridges Lengthwise and Stop Bush

66

Axle Pin without Friction Ridges Lengthwise

16

Axle Towball

63

Pin 1/2

277

Pin without Friction Ridges Lengthwise

2

Pin 3/4

53

Axle Pin without Friction Ridges Lengthwise

73

Pin 3/4

87

Pin Long without Friction Ridges

15

Axle Towball

140

Pin 1/2

11

Pin Double with Axle Hole

238

Pin Long with Friction Ridges Lengthwise and Stop Bush

16

Pin Long without Friction Ridges

66

Pin without Friction Ridges Lengthwise

73

Axle Pin 3L with Friction Ridges Lengthwise and 1L Axle

81

Pin 3/4

Technic Special - Show owned parts

2

Ball Joint

4

Cam

*72

Chain Link

1

Digger Bucket 4 x 4 x 9 with 3 teeth

2

Digger Bucket 5 x 7 x 4 1/2 Clamshell with Pin Hole and Axle Hole

1

Digger Bucket 8 x 10

1

Digger Bucket 10 x 18

1

Digger Bucket 13 x 23

4

Disk 3 x 3

4

Grabber Arm Claw with 3L Thick Beam [Type 1]

216

Link Tread

*13

Plate 1 x 4 with Toothed Ends

1

Plate 1 x 5 with Smooth Ends, 4 Studs and Centre Axle Hole

*8

Plate 1 x 6 with Toothed Ends

*2

Stick Shift

1

Turntable Large Type 3 Top (60 Teeth)

4

Turntable Small Base (28 Teeth)

16

Plate 1 x 5 with Toothed Ends, 2 Studs and Center Axle Hole

17

Changeover Catch

*2

Plate 1 x 6 with Toothed Ends

*2

Link 1 x 16

*6

Plate 1 x 4 with Toothed Ends

*1

Plate 1 x 6 with Toothed Ends

*4

Plate 1 x 10 with Toothed Ends

*2

Plate Rotor 3 Blade with Toothed Ends and 3 Studs (Propeller)

*1

Digger Bucket 8 x 6

12

Plate 1 x 4 with Toothed Ends

*2

Stick Shift Plate

*1

Changeover Catch

6

Disk 3 x 3

13

Linear Actuator Mini with Dark Bluish Gray Head and Orange Axle

12

Linear Actuator with Dark Bluish Gray Ends [Improved Version]

3

Turntable Large Type 2, Complete Assembly with Black Outside Gear Section (26/56 Teeth)

1

Turntable Large Type 3 Base

4

Turntable Small Top

4

Cam

2

Link 1 x 9 Bent (6 - 4)

170

Link Tread Wide with Two Pin Holes, Reinforced

6

Rotor Blade Small with Axle and Pin Connector End

1

Turntable Large Type 2, Complete Assembly with Black Outside Gear Section (26/56 Teeth)

Technic Steering, Suspension and Engine - Show owned parts

11

Link 1 x 6 with Stoppers

8

Link 1 x 6 without Stoppers

10

Link 1 x 9

4

Steering Arm with Pins

2

Steering Wheel Large

1

Steering Wheel Small (3 Studs Diameter)

32

Wishbone Suspension Arm

*16

Steering Arm 6.5 x 2 with Towball Socket Squared, Un-Chamfered

6

Engine Cylinder without Side Slots, with Bottom Slots

16

Engine Connecting Rod

6

Engine Crankshaft

*16

Engine Cylinder with Side Slots

*11

Engine Piston Square 2 x 2 - Old

*8

Shock Absorber 6.5L with Normal Spring

*2

Steering Arm

12

Steering Pulley Large

*8

Steering Wheel Hub Large

*2

Steering Wheel Large

*28

Universal Joint 4L [Complete Assembly]

6

Engine Crankshaft Center

*16

Engine Piston Round

*4

Link 1 x 6 without Stoppers

2909c03/816

Shock Absorber 9.5L with Soft Spring

10

Engine Crankshaft

52

Engine Piston Round

12

Shock Absorber 6.5L with Hard Spring

8

Shock Absorber 9.5L with Extra Hard Spring

*4

Steering Arm Large with Hub - Axle Connection

*4

Steering Arm Large with Hub - Pin Connection

2

Steering Knuckle Arm with Ball Joint

19

Engine Crankshaft Center

52

Engine Connecting Rod

9

Engine Crankshaft

18

Engine Cylinder with Side Slots

*28

Engine Cylinder without Side Slots, with Bottom Slots

4

Shock Absorber 6.5L with Soft Spring

14

Steering / CV Joint

10

Steering Arm 5 x 1 with Towball Socket

4

Steering Ball Joint Large Open with C-Shape Pivot Frame

12

Steering Portal Axle Housing

4

Steering Portal with 2 Pin Holes

4

Steering Portal with 2 Pin Holes and 2 Ball Joint Arms

6

Steering Wheel Small (3 Studs Diameter)

32

Universal Joint 3L [Complete Assembly]

5

Universal Joint 4L [Complete Assembly]

10

Engine Crankshaft Center

12

Steering / CV Joint Axle

8

Steering Arm 5.5 x 2 with Towball Socket Rounded, Chamfered

4

Steering Ball Joint Large Receptacle

20

Steering Hub for Portal Axle

Tiles - Show owned parts

9

Tile 1 x 1 with Groove

42

Tile 1 x 2 with Groove

14

Tile 1 x 4 with Groove

5

Tile 1 x 6 with Groove

29

Tile 1 x 8 with Groove

24

Tile 2 x 2 with Groove

9

Tile 2 x 4 with Groove

6

Tile 1 x 2 with Groove

2

Tile 2 x 2 with Groove

18

Tile 1 x 2 with Groove

4

Tile 1 x 8 with Groove

18

Tile 2 x 2 with Groove

4

Tile 2 x 4 with Groove

4

Tile 1 x 2 with Groove

6

Tile 1 x 4 with Groove

4

Tile 2 x 2 with Groove

6

Tile 1 x 1 with Groove

25

Tile 1 x 2 with Groove

2

Tile 1 x 4 with Groove

16

Tile 1 x 6 with Groove

1

Tile 1 x 8 with Groove

7

Tile 1 x 3

38

Tile 2 x 2 with Groove

2

Tile 1 x 4 with Groove

4

Tile 1 x 6 with Groove

8

Tile 1 x 2 with Groove

2

Tile 2 x 4 with Groove

2

Tile 1 x 4 with Groove

1

Tile 2 x 2 with Groove

3

Tile 1 x 2 with Groove

2

Tile Round 2 x 2 with Bottom Stud Holder

6

Tile 1 x 2 with Groove

5

Tile Round 1 x 1

9

Tile Round 1 x 1

10

Tile 1 x 2 with Groove

2

Tile 1 x 4 with Groove

36

Tile 1 x 6 with Groove

6

Tile 1 x 8 with Groove

10

Tile 1 x 3

5

Tile 2 x 2 with Groove

3

Tile 2 x 4 with Groove

2

Tile Round 1 x 1

4

Tile Round 2 x 2 with Bottom Stud Holder

10

Tile 1 x 2 with Groove

5

Tile 1 x 4 with Groove

4

Tile 1 x 6 with Groove

3

Tile 1 x 3

4

Tile Round 1 x 1

6

Tile 1 x 2 with Groove

5

Tile Round 1 x 1

11

Tile 1 x 2 with Groove

Tiles Printed - Show owned parts

1

Tile 1 x 2 with Avionics Copper, Red & Silver Print

3

Tile 1 x 4 with Train Controls Print

Tiles Special - Show owned parts

12

Tile Special 1 x 2 Grille with Bottom Groove

1

Tile Special 4 x 4 with Studs on Edge

1

Tile Special 1 x 2 Grille with Bottom Groove

6

Tile Special 1 x 2 Grille with Bottom Groove

2

Tile Special 4 x 4 with Studs on Edge

2

Tile Special 4 x 6 with Studs on Edges

22

Tile Special 1 x 2 Grille with Bottom Groove

4

Tile Special 1 x 2 Grille with Bottom Groove

4

Tile Special 1 x 2 Grille with Bottom Groove

3

Tile Special 2 x 2 Inverted

9

Tile Special 1 x 2 Grille with Bottom Groove

3

Tile Special 1 x 2 Grille with Bottom Groove

2

Tile Round 8 x 8

2

Tile Special 1 x 2 Grille with Bottom Groove

15

Tile Special 1 x 1 with Clip with Rounded Edges

9

Tile Special 1 x 2 Grille with Bottom Groove

20

Tile Special 1 x 2 with Handle

4

Tile Special 2 x 2 with Pin

1

Tile Special 2 x 3 with 2 Clips [Thick Open O Clips]

1

Tile Special 4 x 4 with Studs on Edge

20

Tile Special 1 x 2 Grille with Bottom Groove

Tools - Show owned parts

2

Brick and Axle Separator v2.0

Transportation - Land - Show owned parts

2

Fairing 1 x 4 Side Flaring Intake with Two Pins

2

Fairing 1 x 4 Side Flaring Intake with Two Pins

*2

Vehicle, Tipper End Flat with Pins

Transportation - Sea and Air - Show owned parts

8

Cylinder 4 x 4 with Pin Holes and Centre Bar

3

Cylinder 4 x 4 with Pin Holes and Centre Bar

4

Cylinder 4 x 4 with Pin Holes and Centre Bar

2

Cylinder 4 x 4 with Pin Holes and Centre Bar

1

Propeller 8 Blade 5 Diameter

Tubes and Hoses - Show owned parts

7

Hose Soft Axle 11

1

Hose Soft Axle 12

x467c12/06

Hose, Classic 4mm D. 12L

5102c15/01

Hose, Pneumatic 4mm D. 15L

4

Hose, Pneumatic 4mm D. 27L / 21.6cm

5

Hose, Pneumatic 4mm D. 30L / 24.0cm

1

Hose, Pneumatic 4mm D. 33L / 26.4cm

1

Hose, Pneumatic 4mm D. 37L / 29.6cm

5102c50/01

Hose, Pneumatic 4mm D. 50L

1

Hose, Pneumatic 4mm D. 54L / 43.2cm

5102c05/01

Hose, Pneumatic 4mm D. 5L

1

Hose, Pneumatic 4mm D. 80L / 64cm

1

Hose, Pneumatic 4mm D. 9L / 7.2cm

2

Hose, Ribbed 7mm D. 2L

2

Hose, Rigid 3mm D. 12L / 9.6cm

3

Hose, Rigid 3mm D. 6L / 4.8cm

1

Hose, Rigid 3mm D. 9L / 7.2cm

4

Hose, Pneumatic 4mm D. 10L / 8cm

1

Hose, Pneumatic 4mm D. 14L / 11.2cm

1

Hose, Pneumatic 4mm D. 21L / 16.8cm

1

Hose, Pneumatic 4mm D. 24L / 19.2cm

1

Hose, Pneumatic 4mm D. 28L / 22.4cm

3

Hose, Pneumatic 4mm D. 3L / 2.4cm

1

Hose, Pneumatic 4mm D. 40L / 32.0cm

4

Hose, Pneumatic 4mm D. 6L / 4.8cm

4

Hose Soft Axle 11

3

Hose Soft Axle 16

4

Hose Soft Axle 19

2

Hose, Ribbed 7mm D. 2L

*1

Hose, Rigid 3mm D. 23L / 18.4cm

2

Hose, Rigid 3mm D. 30L / 24.0cm

5102c10/72

Hose, Pneumatic 4mm D. 10L / 8cm

5102c05/77

Hose, Pneumatic 4mm D. 5L

5102c08/71

Hose, Pneumatic 4mm D. 8L / 6.4cm

*1

Hose, Rigid 3mm D. 7L / 5.6cm

*1

Hose, Rigid 3mm D. 9L / 7.2cm

2

Hose, Ribbed 7mm D. 2L

4

Hose Soft Axle 12

3

Hose Soft Axle 19

2

Hose, Ribbed 7mm D. 4L

*2

Hose, Rigid 3mm D. 11L / 8.8cm

6

Hose Soft Axle 14

1

Hose, Ribbed 7mm D. 19L

1

Hose Flexible 12L

1

Hose, Pneumatic 4mm D. 19L / 15.2cm

5

Hose, Pneumatic 4mm D. 27L / 21.6cm

2

Hose, Pneumatic 4mm D. 30L / 24.0cm

1

Hose, Pneumatic 4mm D. 33L / 26.4cm

1

Hose, Pneumatic 4mm D. 37L / 29.6cm

1

Hose, Pneumatic 4mm D. 54L / 43.2cm

1

Hose, Pneumatic 4mm D. 80L / 64cm

1

Hose, Pneumatic 4mm D. 8L / 6.4cm

4

Hose Soft Axle 11

6

Hose, Ribbed 7mm D. 11L

*4

Hose, Ribbed 7mm D. 5L

2

Hose, Ribbed 7mm D. 7L / 5.6cm

Wheels and Tyres - Show owned parts

14

Tire 17 x 43

7

Tire Offset Tread

8

Tread Sprocket Wheel Large

16

Tread Sprocket Wheel Small

5

Tyre 14 x 6 Solid Smooth

2

Tyre 17.5 x 6 with Shallow Staggered Treads and Middle Band

*12

Tyre 24 x 43

4

Tyre 30.4 x 14 VR Solid

2

Tyre 56 x 26 Balloon

22

Tyre 62.4 x 20

2

Tyre 68.7 x 34 R

4

Tyre 68.8 x 36 H

4

Tyre 68.8 x 36 ZR

*8

Tyre 81.6 x 34 ZR Straight Tread

6

Tyre 81.6 x 38 R Balloon

8

Tyre 94.3 x 38 R

6

Tyre 94.8 x 44 R Balloon

4

Tyre Racing Large

4

Wheel 56 x 34 Racing Medium with 3 Pin Holes

8

Wheel 56 x 36 Racing Medium with 6 Pin Holes

Similar2

Wheel with Split Axle hole

3

Wedge Belt Wheel [aka Pulley]

*12

Wheel 24 x 43

3482/719

Wheel with Split Axle hole

2

Wedge Belt Wheel [aka Pulley]

4

Wheel 56 x 36 Racing Medium with 6 Pin Holes

*8

Wheel 81.6 x 34 Six Spoke

2

Wedge Belt Wheel [aka Pulley]

*2

Wheel 30.4 x 14 VR

2

Wedge Belt Wheel [aka Pulley]

53

Wheel 11 x 8 with Center Groove

4

Wheel 18 x 14 with Pin Hole, Fake Bolts and Shallow Spokes

3

Wheel 18 x 8 with Fake Bolts and Shallow Spokes

2

Wheel 30.4 x 20 without Pinholes, with Reinforced Rim

12

Wheel 43.2 x 26 Racing Small with 3 Pinholes

6

Wheel 56 x 34 Racing Medium with 3 Pin Holes

22

Wheel 62.4 x 20 with Flush Axle Stem

14

Wedge Belt Wheel [aka Pulley]

2

Wheel 31 x 15

4

Wheel 62 x 46 Racing Large

Windows and Doors - Show owned parts

*5

Window 1 x 2 x 2 Shutter

Windscreens and Fuselage - Show owned parts

*2

Windscreen 1 x 4 x 1 1/3 with Bottom Hinge

2

Windscreen 3 x 6 x 1 Curved

Part Details